I can't believe that 😊

What about the model with the electrical unit on the right-hand side?

Thank you

what size screws are they

I cut the hose from the fauxet to the swammp cooler how xan i fix

Thanks for lacking so many details

Do you keep the water on all the time your cooler running

Help. I can't seem to bend the float arm correctly. It over flows and then dries up . Is there a better float than currently promoted?

thanks!

I'm putting that on the inside of my house

i’ve replaced literally everything on the same exact cooler, and it still blows out hot air .. how do I fix this issue??

You should show how to take the screws in and out. It’s really hard unless you do it just so. I spent about an hour by trial and error figuring out just how to get the screws in and out just to find out that the replacement part fits the machine, but then the screen doesn’t fit all the way into the part even though I used the correct model number for the machine to order the part from LG. Can you say TFWOT? My best advice to those of you out there who are not doing something like this on a regular basis: higher a professional. It’s worth the money.

Swamp cooler had lot's of HAIR..!

What is the value / need for this bleed off tube? I've read is helps keep the water cleaner, how so? How necessary is it? thank you.

Good stuff. Mine doesn't have the side media, that's weird.. but I always see them in the replacement kits. Thanks for the video - also helped me take those clips off without breaking stuff ;)

Thank you for the through instructions. Got my put in in less than 5 minutes

Do you have a video on how to connect to the window ? Thank you

the new media is a piece of crap/ with the split pads it leaks like crazy. cheap pads now.

S say the tension is right cud it just b time fir a new belt? Ive had belt about 2 years

mine had original pads after 8 yrs i decided to to with the blue master cool got a big roll for 52$ compared to 120$ for the dactory replacement but i see that these other kinds of pads do not work well since they are not rigid they fall off the sides when soaked in water unless secured every milimeter and since they are so thin i doubled it up and since the inside is so small compaeed to big box ones you really need the factory replacement.

Didnt know you can buy pads! 😂

Amazing idea to cover with plastic, thank you!!!

Thank you and God bless you for sharing your knowledge. My water line kept on leaking. I keep changing the brass sleeve but nothing I did help. I did this which took like 2 min and no more leak🥳. Thank you

Since my unit is a roof mounted down draft, you will not catch me on the roof 'every few weeks' routing the distributer lines 😁! That said, only once did I have a problem with clogged distributor (sometimes aka 'spider') caused by aspen fibers getting sucked up by the pump. Solution: make sure the screen on the pump or basket is in good condition.

Awesome ! Thank you that’s simple enough.

Because your house has to be cool in the summer

Bro, how many swamp coolers do you have?

That was so easy quick and straight to the point great video

Great video. Hey i need to replace my pump, do you happen to know how to access the electrical panel where the pump connects to? I know the pump electrical line theads in from the back i wonder if the other end can be accessed by taking off the front panel???

Perfect. My connector just got broken. Your video is the first I found ...thank you so much!!!

Brilliant vid. Anyone know much water does the bleed line waste on high in a 24 hour period? TYMIA

39k views😂😂😂 thank you so much!!!!

Did you mount it there for the video? Those thermostats are not waterproof

Didn’t work with G4SE gateway on 5/29/24.

Where did you get the ppads

Great video - easy to follow all of the steps. I just hooked up my water using the same system that you did. I'm running the cooler and haven't seen water come out of the overflow yet... is there a way to hook the water supply up so that you can leave the hose bib on "low"? That's what I have it at now, but I'm sure at some point it is going to start out the overflow valve. I'll check out your other videos, but will be sure to clean my cooler at the end of this season - thanks again!

we just bought the same unit and finished converting it to side discharge ,, now ,, we will use it as a window unit for our yurt ,, its now siting on a 2 feet high platform outside of the window , do you have a video on how to wire this please ?

W🤩W Thanks! I believe I can do that!

Dude you are my hero. Thanks!

Thank you! So helpful i have to do it alone this year 😳

Thank you! How do you get it unstuck if lime scale built up? My spouse passed away, and I'm not as strong with smaller hands. Ideas appreciated!

Thanks for the help. Simple task but made easier by you.

Are the holes for the distributor supposed to be pointing up like yours? Mine was and I made them point downward. It seemed like the water was spraying and dripping excessively past the pads with them pointing up.

Quick question boss. How much water is it normal for these units to discharge through the purge hose? Mine is quite a bit. About 1 gallon an hour. It is a new unit so the plug (or whatever it's called doesn't have any buildup). I'd appreciate the input. Great video by the way 👍

Originally came for the video and stayed for the community built around not being able to put in those forsaken screws.

Wish all videos were this clear and straight to the point. Excellent!

when would it be a good idea to clean the doors? mine have some mineral build up, but not a lot

i need to jb weld a few pin holes in the pan, i installed the unit new in 2002, 6 yrs ago i did the black stuff you show here. needs another pan tune up again, rusty as hell :)

Where is the bar that goes in atop of the wet pan and how does it sit correctly?

Is the sheet metal from a roll of flashing? Just wondering how think it is?