Bonaire Swamp Cooler Startup

[@maqcc100]

very instructive, I just got a house and the system was winterized and I didn't know how to make it work, your video helped me a lot, very good, thanks

[@boogity66]

Thanks for watching

[@karlaelvis9815]

Great video - easy to follow all of the steps. I just hooked up my water using the same system that you did. I'm running the cooler and haven't seen water come out of the overflow yet... is there a way to hook the water supply up so that you can leave the hose bib on "low"? That's what I have it at now, but I'm sure at some point it is going to start out the overflow valve. I'll check out your other videos, but will be sure to clean my cooler at the end of this season - thanks again!

[@DeeDee-rr3sn]

Great video. Hey i need to replace my pump, do you happen to know how to access the electrical panel where the pump connects to? I know the pump electrical line theads in from the back i wonder if the other end can be accessed by taking off the front panel???

[@logansmokes.2762]

mine had original pads after 8 yrs i decided to to with the blue master cool got a big roll for 52$ compared to 120$ for the dactory replacement but i see that these other kinds of pads do not work well since they are not rigid they fall off the sides when soaked in water unless secured every milimeter and since they are so thin i doubled it up and since the inside is so small compaeed to big box ones you really need the factory replacement.

[@omarrosas7502]

Quick question boss. How much water is it normal for these units to discharge through the purge hose? Mine is quite a bit. About 1 gallon an hour. It is a new unit so the plug (or whatever it's called doesn't have any buildup). I'd appreciate the input. Great video by the way 👍

[@boogity66]

You could always restrict the flow a little bit of the discharge hose. But the more water that bleeds off the less build up.

[@lifewithitxell]

i’ve replaced literally everything on the same exact cooler, and it still blows out hot air .. how do I fix this issue??

[@HJones-hc4of]

Troubleshooting: The hose on the right underside of unit endlessly discharges water. What’s the issue?

[@boogity66]

More than likely it is your dump valve you should be able to look it up on Google

[@hectorpena2007]

Did you ever figure out what it was? Mine does the same thing

[@shelleyshelton33]

Brilliant vid. Anyone know much water does the bleed line waste on high in a 24 hour period? TYMIA

[@boogity66]

You could restrict the water line to bleed less. More than likely you should be bleeding at least 5 gallons and 24-hours.

[@mosescortez6204]

Yes I agree ,I have a question about the motor it only hums after clean

[@boogity66]

Sounds like the motor is bad. Especially if you got it wet cleaning it.

[@veragarcia7817]

We just replace are pump last year do I need to replace it again the way I cleaned it I ran the hose open the bottom we’re the water pours out is that ok but I feel it should be colder then that should I take it apart may there’s things in the pump

[@boogity66]

If the pump is pumping water it should be good there's a lot of factors temperature if you have humidity if you're not exhausting air properly

[@wasangelicoful]

hello, do you know if I have a mastecool if I was to get the bonaire if its compatible ? ty

[@whitetrim1]

Thanks for sharing!

[@larryriehle166]

You sure over simplified this. I live in the desert of Socal. My cooler is in a Window 4 feet off of the ground and installed for earthquake standards. I must soak my pads in a mild solution of water and swimming pool acid then and carefully hose the scale off of the pads. Putting the discharge hose on the distribution nozzle while on a small step ladder while trying to get all of the clips in place is a precarious arrangement.

[@amrakarmaMisophoniac]

Dude, getting this discharge hose to connect properly drives me insane every season.

[@boogity66]

It takes patience put on the cover slowly you'll get it.

[@amrakarmaMisophoniac]

@@boogity66 Lol, thanks man. Eventually I did get it last season but it took a lot of curse words. Same today. Appreciate your reply.

[@hamidshaikh8638]

Hello sir your video is perfect like service training I'm very much happy to watch details explanation please sir give me some more details what is.1) pad filter size. 5090 or 6090 2) fan motor speed capacity RPM and air flow (CFM)

[@boogity66]

you can call the manufacture for the specs.

[@darylwest9830]

Please do not make the mistake I made . I bought a Bonaire Durango through the company's website and they sent me one that had been returned and was missing parts plus didn't work. No one answers the phones. No one returns calls . I'm having to sue through my State's Attorney General to recover my funds. No warranty whatsoever.

[@adamsapp4859]

"Go Ahead"!!! 😂

[@thegreatest2ever]

Wait until you have to replace the pump 😩 Just grab a beer and fish it on thru 👍

[@tonetorgersen3668]

great!

[@boogity66]

thanks for watching

[@thegreatest2ever]

You forgot to hook up the hose 😆😉

[@boogity66]

No, you are wrong when the cover is put on it slips onto the discharge line. That is why it is not easy to get the cover on.

[@thegreatest2ever]

@@boogity66 I'll have to try that next time! I've always hooked it up first to make sure it was tightly secure. Thanks 👍

[@boogity66]

​@@thegreatest2ever Either way you do it will work. If you do it the way I did you must pull the hose up high so when you put it on the cover it will be attached.

[@sarahdannunzio5068]

How many "go ahead" and "went ahead" do you count?

[@boogity66]

I have no clue what you are asking.

[@crztrn1]

@@boogity66 too many to count. lol . just having some fun. no disrespect. great info