Was wondering how can I make faster currently waiting on k&n air intake but what else can I do to make it pick up a bit more
@plesadian3Күн бұрын
I bet the reason most people watched this was to see you actually compress the springs and get them on the valves then get retainer clips on .. I bet you struggled like hell and that’s why you cut to them magically being on .. lol
@CoopCuh5 күн бұрын
Not gonna lie I’ve went 180 on my gsxr but my doodlebug mini bike still scares the hell out of me, everything was sketch in the 80s when the frames were made lol your nuts feel every bump
@Guido194 күн бұрын
@@CoopCuh exactly haha!!
@iceyl2096 күн бұрын
What’s that filter looking cylinder sticking out the side I keep seeing it
@Guido194 күн бұрын
@@iceyl209 it’s a air breather for the gas tank and the valve cover
@idrxpxottic53266 күн бұрын
Where do you get the rear slick tire
@Guido194 күн бұрын
@@idrxpxottic5326 on ombwarehouse
@readiimitch65946 күн бұрын
Bro where’d you get your tank from the chrome one from Amazon is ass
@Guido196 күн бұрын
@@readiimitch6594 it’s all custom
@readiimitch65946 күн бұрын
@@Guido19 like you got the tank dipped ?
@Guido194 күн бұрын
@@readiimitch6594 yup! I got it chrome plated
@readiimitch65944 күн бұрын
@@Guido19 Mann that’s dope bro 🔥 I been wanting to get a couple things plated for a while but always thought it a be a arm and leg 🦵 for 🤦🏾♂️
@Guido192 күн бұрын
@@readiimitch6594 Aye I appreciate!!!! And you would be right haha. Its super expense and the turn around time at least here is over 2-3 months.
@Wab20077 күн бұрын
Hey so i accidentally torqued the rod to 13.5 ft pounds so 162 inch pounds. I was gonna take it back apart and torque it to spec but I’m wondering if I need to take out my cam and valves to do so
@Guido196 күн бұрын
@@Wab2007 hmm you might have enough access to just take out the cam and torque it down or you might be able to work around it
@jeron92728 күн бұрын
Is this a megamoto 80/105 rigid roller frame?
@Guido196 күн бұрын
@@jeron9272 yes!
@jeron92726 күн бұрын
@@Guido19 Is it like pretty small for a minibike? I've been thinking about building something on that frame but I'm worried about sizing. Do you think it would be alright for someone like 5'11?
@Guido194 күн бұрын
@@jeron9272 it is a little small but I don’t think it will be a problem. I’m pretty big to and I’m just fine on mine. If you run bigger tires to it’s more comfortable to
@garywinthorpe744510 күн бұрын
What size the bulbs ?
@bacon_bro20629 күн бұрын
Reverse lights and side running lights front and back are 194 bulb
@garywinthorpe74456 күн бұрын
@@bacon_bro2062 what about interior lights bro?
@bacon_bro20626 күн бұрын
@@garywinthorpe7445 194 bulbs for the interior lights
@yworld292711 күн бұрын
Yall think a chrysler 300 spoiler would look good
@HuskerRed1113 күн бұрын
Great video. I have a 9th Gen 2016 Limited LTZ. Any idea on how much coolant I'd need for a flush? I have a shop near me I can take my cars to & he'll do the labor, I take the parts to him. So wondering how many gallons I'd need to get. Also what kind/brand of headlights you running? Look like LED's. Thanks!
@Guido196 күн бұрын
@@HuskerRed11 I would say around 9 quarts as that is the coolant capacity that the impala holds. You could probably drain it like I show in this video and run distilled water and a cleaner if need be but I’m not really a fan of those and then just drain it again. My headlights are the auto one brand. They are super bright
@HuskerRed116 күн бұрын
@@Guido19. Cool. Thanks!
@Wab200713 күн бұрын
Hey man, I just finished building my 212 hemi it has a billet rod, flywheel, flat top high compression piston, .010 hg and vm22 carb. When I hit maybe half throttle the engine bogs out and stalls. I tried adjusting the carb but doesn’t help much. I have a stock gas tank and no fuel pump. Could the issue be I need an external fuel pump? Or rejet the carb. It has a 130 main jet and 16 pilot
@Guido196 күн бұрын
@@Wab2007 hmmm if the motor starts up and runs fine until half throttle the engine itself is fine, like valve lash and timing etc. it’s definitely a carb, fuel, air or spark issue? What does your spark plug look like?
@Wab20076 күн бұрын
@@Guido19 it’s weird the spark plug is always fouled. I put it in a fuel shut off line it’s almost as if the carb is running lean but it still gets dirty. I might try moving the needle to the middle setting?
@Wab20076 күн бұрын
@@Guido19 so I got it running good spark plug is good color and it runs great but still kind of bogs at full throttle
@Guido194 күн бұрын
@@Wab2007 hmmm. It could possibly be lean when idling or revving a little or it could be rich at idle or revving a little. It could also be lean or rich at wide open throttle too. What I would do is completely clean the plug and probably put a new one in. And put it back in. Start the bike and let it idle for a little then shut it off and check the plug. See if it is black or tan or white etc. then I would make adjustments to the idle jet or idle screw. Then clean it and try it again till the color is perfect. Repeat it again and rev the motor a bit and see what color, clean, make adjustments etc, then ride the bike and go wide open throttle then kill the motor and check the plug, clean it make adjustments etc. that way you will be able to see if you need to change the main jet or pilot jet or air fuel screw. And that is the most accurate way of testing the jets without a exhaust probe for a fuel air mixture gauge
@Guido194 күн бұрын
@@Wab2007 the spark plug should be a nice light tan-brown-a darker brownish color. You don’t wanna have it white cause that will cause your motor to run way hot and you will destroy it and you don’t wanna have it to black cause that will burn fuel to much and have carbon deposits everywhere and it will smoke too.
@bragilbe1217 күн бұрын
Surprisingly good for scale tires imo. I got mine for free with Amain customer rewards points and havent taken them off my rig since
@Guido1917 күн бұрын
@@bragilbe12 yeah they work good!!!
@LionhartM17 күн бұрын
First coolant change I've ever seen where no bleeding procedure is shown. Do these just not need it?
@Guido1917 күн бұрын
@@LionhartM yup! No need to bleed it! The way the reservoir is designed the system will bleed and burp itself
@LionhartM17 күн бұрын
@@Guido19 Okay, I think I remember learning that years ago, but I forgot lol. I'm so used to older cars
@devonortega67219 күн бұрын
I don't have the lil thing that drops in tht whole on mine exact same calipers but missing part will they work I have other calipers think I could source parts from that
@Guido1917 күн бұрын
@@devonortega672 hmm not sure! They might still work but you just gotta be careful and make sure the pads don’t fall out!
@ebksm0key19 күн бұрын
What kinda tires do you have on your bike?
@Guido1917 күн бұрын
@@ebksm0key I had the gopowersports ultimate street tires!
@ebksm0key10 күн бұрын
@@Guido19 thank you bro🫡🫡
@minibikerebuilds19 күн бұрын
Thanks for the video! After finding your video I was able to find these tires. I had the same mags already just ordered to small of tires originally. Got them mounted today!! Looks so good! Thanks again.
@Guido1917 күн бұрын
@@minibikerebuilds heck yeah awesome!
@bruceeuliarte825420 күн бұрын
I have a Chinese motor the 7.5hp massimo m200 the camshaft is plastic the people who owned it before never took care of it. Well now after removing the governor and basically putting that crank seal cover back the cam isn’t sitting right on the case to where I’m getting no compression…any tips? If I have the case barely in there I’ll get compression but the minute I start tighten the bolts down I get no compression. Thanks in advance
@Guido1917 күн бұрын
@@bruceeuliarte8254 hmm very weird possibility a default in the plastic cam or its not in time! Make sure the timing marks are all lined up.
@Wab200720 күн бұрын
Did you have any problems using an impact for the flywheel
@Guido1917 күн бұрын
@@Wab2007 nope!
@stevenkudrna946323 күн бұрын
Could you tell me what pilot jet you installed?
@Guido1917 күн бұрын
@@stevenkudrna9463 I think I used the stock pilot jet
@christianarcos433324 күн бұрын
So 26mm fits? People on forums say it doesn’t.
@Guido1917 күн бұрын
@@christianarcos4333 yup! We have had no issues
@eugenew671724 күн бұрын
Did this,,,oil still going into air intake
@Guido1924 күн бұрын
@@eugenew6717 cause you need to run a oil catch can. You give mod will actually allow more oil to get into the intake.
@-wc4vy25 күн бұрын
Can you tell me what the nuts are called that you use to mount the brakes?
@Guido1917 күн бұрын
@@-wc4vy I just used Alan bolts with nylon lock nuts
@jakesdronelife630725 күн бұрын
Been standing by nibbi since the beginning off my mini bike adventures so about 5 years now
@trunixz626726 күн бұрын
will mineral oil work?
@Guido1917 күн бұрын
@@trunixz6267 not sure I would just stick to dedicated brake fluid
@llwhowantsmokell26 күн бұрын
Sounds GREAT after the new one 🔥🔥I'm getting one
@llwhowantsmokell26 күн бұрын
Saying K&N was kinda making me mad a little bit lol it's definitely K&M lol
@dannyd113726 күн бұрын
Could you link where you bought the brakes please?
@Guido1917 күн бұрын
@@dannyd1137 I got the pads on Amazon
@bozebohz829727 күн бұрын
Hey where did u get The filter for the gas tank?
@Guido1917 күн бұрын
@@bozebohz8297 I got it at autozone!
@DMACC3627 күн бұрын
I bought a mini bike but all I’m gonna do is build and improve. I think it’s a good hobby to stay busy #newlearner
@masonfalc29 күн бұрын
So I had a billet rod in my motor for a while but I just changed out my bearings because they were very worn out I also installed a flat top piston and I checked my oil clearance it was good at .003 and now when I tourqe down my rod bolts it won’t spin the only thing in the motor is the rod and crank and piston I’m very confused please lmk if you have any ideas what it could be
@Guido1917 күн бұрын
@@masonfalc hmmm it’s not able to spin? Is the rod hitting the case or possibly it’s not installed right on the crankshaft? Is the motor in time are the marks lined up?
@DtownFunkАй бұрын
Bro , what clutch is this exactly from Noriom , got a part #?
@Guido1917 күн бұрын
@@DtownFunk I don’t have a part number but it’s the noram ge stinger clutch
@samuelbrooks8199Ай бұрын
What do you do if your throttle cable doesn't have a tip?
@Guido1917 күн бұрын
@@samuelbrooks8199 you might have to buy a new one or you can solder a new end on
@MikeBeatzcomАй бұрын
Piston needs to be top end before doing a lash valve on both intake and exhaust
@Guido1917 күн бұрын
@@MikeBeatzcom yup!
@MikeBeatzcomАй бұрын
I don't have .030 on my feeler guage
@Guido1917 күн бұрын
@@MikeBeatzcom it’s .003
@MikeBeatzcom17 күн бұрын
@@Guido19 ok thanks
@MikeBeatzcomАй бұрын
thanks!
@DominoskiiiАй бұрын
Changed my coil and the thing started kickbacking so bad does having the coil gap wrong make that happen?
@ah_guz_57626 күн бұрын
Same problem I’m having
@Guido1917 күн бұрын
@@Dominoskiii it could be the coil gap is wrong but a lot of it has to do with the advanced timing the billet flywheel has and your valve lash
@Dominoskiii17 күн бұрын
@@Guido19 i messed wit valve lash and had got it to start then took it on a run and the motor just trait up turned off on me mid ride and it wouldnt start after, i know for a fact i didnt blow the motor 😭
@Guido1917 күн бұрын
@@Dominoskiii hmm? Got gas? Fuel turned on? Did the coil possibly move from adjustment? Is the spark plug good?
@Dominoskiii17 күн бұрын
@@Guido19 spark plugs good, got gas, coil gap hasnt moved, What happened was i was being dumb and wanted to go full speed and it jus trait up bogged down and turned off then wouldnt start after could my valve lash still be bad or something? I couldnt have blown the motor it still pulls perfectly everything looks good but i havent checked valves yet
@christianhunt7382Ай бұрын
those other videos made it seem so much harder, i thought i was going to need a lift to do this job. your video was short, to the point, and for some reason not at the top of the list! thanks for uploading, im excited to take on this project now!
@Guido1917 күн бұрын
@@christianhunt7382 thank you! Much appreciated!
@grumpythefortmaker9510Ай бұрын
what size do i get for my rod and piston so it all fits? ive seen .550 or .570 for pistons and 3.308 or 3.328+0.20 for rods. So what sizes do i get?
@Guido1917 күн бұрын
@@grumpythefortmaker9510 it depends what you wanna do if your just doing a stock replacement I would get the stock length 3.308.
@Guido1917 күн бұрын
@@grumpythefortmaker9510 for pistons you should be good with 570 or below any more you might have to do a longer block for a longer stroke
@JWJTRAINORАй бұрын
What type of extension do you recommend for this as me and my neighbour tried doing this, but kept getting the spark plug socket. Stuck on the spark plug and couldn’t get it out.
@Guido1917 күн бұрын
@@JWJTRAINOR It’s been so long since I did this but I think I used like a 5in long extension with a swivel
@JWJTRAINORАй бұрын
Why did you unhook your battery? You don’t really need too
@Guido1917 күн бұрын
@@JWJTRAINOR no you really don’t have to but it’s good practice with these newer cars you don’t wanna mess up anything or possibly play with the computer while messing with the coils
@FlatDietSoda.Ай бұрын
Can you put a link for the exahast pipe? I have the same build. Also great vid!
@Guido1917 күн бұрын
@@FlatDietSoda. thank you! I don’t have a link but the was the staged rvl pipe and tip setup
@FlatDietSoda.17 күн бұрын
@@Guido19 Thanks
@AshleyRodriguez-cm6guАй бұрын
Hi, what does it mean when you turn on the car but it turns off, or it will turn on and if once put on drive it turns off ???
@Sam-kw9wdАй бұрын
Fuel pump or MAF sensor problem usually but better plug an obd reader to see wyat tye actual problem really is. Eassiest way if you dont have one is to find a mechanic.
@MikeBeatzcomАй бұрын
What size bolt will fit on the top?
@Guido1917 күн бұрын
@@MikeBeatzcom 1/4" bolt with a 10mm hex head with self tapping threads
@MikeBeatzcom15 күн бұрын
@@Guido19I didn't tap the side one… will that do anything wrong? I didn't have that Omb warehouse flywheel puller.
@Guido196 күн бұрын
@@MikeBeatzcom no I let the shaft in mine I never tapped it and it’s fine!
@Nwtd_Ай бұрын
Any suggestions for drippage on the overflow cap side?
@Guido19Ай бұрын
@@Nwtd_ is it dripping for the cap or the rubber line?
@mozzde4675Ай бұрын
Hey when this motor was fully built in the video what did you have inside I’m trying to build your motor seept by step
@Guido19Ай бұрын
@@mozzde4675 I did everything except for going bigger in valve size and I didn’t do any like head size work or any boring or anything to the cylinder
@gamingwithchris1730Ай бұрын
Question i have a racing centrifugal 12TH clutch with a 60 rear sprocket. Is that good top speed?
@Guido19Ай бұрын
@@gamingwithchris1730 it’s not to bad. You should still be able to take off somewhat quick but depending on your motor you will probably top out around 45-50mph
@gamingwithchris1730Ай бұрын
@Guido19 Oh ok. I got a predator 224cc with a vm22 carb and exhaust
@joseboyd4563Ай бұрын
U tore up the clips because u didn't remothem correctly. I know they look like they're a 2 piece clip. Pop the center of the clip up then u can pull the whole clip by hand.
@thegamingfox523Ай бұрын
Can bicycle lube be used on it?
@Guido19Ай бұрын
@@thegamingfox523 I would recommend using a general purpose oil or motor oil to lube it after every other time you ride but to fully take it apart and grease it a high temp grease has to be used
@thegamingfox523Ай бұрын
@@Guido19 Ok thank you
@joshuanichols1816Ай бұрын
They must have listened to you I just got mine in today and it comes with the little nut for that bolt the spacers needing trimmed are still an issue but all and all it’s a great kit