I've tried this also on the Bilt Hamber Deox solution - buying this is in 4kg concentrated dry form (makes 20l at least but can be diluted more to fill larger containters if needed, jsut takes a bit longer to work)is way cheaper than Evaporust , but is basically same product. Using this solution to make a gel is also much cheaper than the cost of buying the ready made deox gel from Bilt Hamber
@StrPtrn4 күн бұрын
Lovely vid!
@StrPtrn4 күн бұрын
How is the Cider Club doing in 2024?
@StrPtrn4 күн бұрын
Nice job!
@anthonyhfe645012 күн бұрын
Saw this one in the past. Still a great reference vid. I wonder how far along you've gotten? The tilt device is also neat. "Why would there be a wiper motor in the way?". But of course ! Lol Take care and thanks again for taking the time to make a video while doing all this work.
@ry7hym28 күн бұрын
phenomenal printer. I've had it for around 5 years now and it still running like a baby horse
@1nvisible1Ай бұрын
*Where'd the compound piece @**0:45** come from?*
@funksterdotorg29 күн бұрын
it was the piece cut out @0:10 with new flanges welded onto it
@veronicabamfield2102Ай бұрын
haha I loved this guy as soon as he said he's a cheapskate, a man after my own heart. Great demonstration. Question though, the percentages given, is that weight of volume?
@funksterdotorgАй бұрын
Weight, always weight. Imagine trying to measure the volume of a floating powder! :oD
@user-qd5gd6fi8l2 ай бұрын
How much to build a compact device?😮
@user-qd5gd6fi8l2 ай бұрын
You need to dry it at 60⁰C for a few hours and grind it up🤌 any chance to build this into a compact device? Good work btw:D
@shiftymcgee41832 ай бұрын
These are great, thank you for making these vids and explaining the working process, couldn't find any other actual legit panko guides, all the others are just workarounds and not authentic
@funksterdotorg2 ай бұрын
You're welcome! Glad they were of some use / entertainment :o)
@indrasumardi37242 ай бұрын
hello mister I'm from Indonesia. Can I order grip battery delivery for Canon EOS M to Indonesia?  
@funksterdotorg2 ай бұрын
No, sorry. This is not a product.
@RCModelling4U3 ай бұрын
I was doing two cars using Evaporust. I was wasting a lot as it was running off all of the chassis components. Not to be beaten I used a fumed silica mix and brushed it on, I had to make it quite thick and involved a lot of stirring. It worked, a nice thick coating which slowed the evaporation, and left it for a couple of days. I then jet washed it all off. Left it a day to dry. Then sprayed it all with Jenolite rust converter to hit any areas I hadn't reached with the Evaporust. Jet washed that. Let it dry. Any bare metal was sprayed with Rustoleum. Once that was all dry I sprayed everything with Lanoguard. The chassis on a 30 year old 4x4 now looks pristine, and it is all well protected.
@robertsteinman44173 ай бұрын
When Honda sees a real rice rocket rofl
@jag47623 ай бұрын
I bought 10kg of that silica to thicken epoxy resin, almost filled a room! 😂 Is 5% silica by weight the maximum ratio?
@funksterdotorg3 ай бұрын
10Kg! How many 100ft boats are you building?! :oD 5% by weight I would say is the minimum ratio for something water-based that you want to support itself on vertical and overhanging surfaces. You could definitely go thicker if needed.
@jag47623 ай бұрын
It was just the one 28’ boat! I’m glad I now have another use for it. 😂
@zNoobs3 ай бұрын
What about mixing it with sodium polyacrylate instead?
@funksterdotorg3 ай бұрын
Can't say I know anything about it. Maybe someone with more chemistry knowledge than me can advise on whether it's safe, and if so you could try it and report back!
@sleepyash57304 ай бұрын
my bro owns this car now we are resurrecting it
@that_weird_vtuber4 ай бұрын
Found ya bitch
@funksterdotorg4 ай бұрын
Nice! It's a shame the rovertech forum went away, I'm sure a lot of people from there would be interested in seeing the resurrection story :)
@sleepyash57304 ай бұрын
@@funksterdotorg it's gonna be documented on KZbin it's being turned into a rally car but I believe we're keeping the same livery it's gonna have a 1.4 n/a atleast for now maybe doing a Honda k swap or a 1.8 vvc swap iv been working on wiring and stripping the donor car
@sleepyash57304 ай бұрын
@@funksterdotorg got it as a rolling shell as the engine went just after the world record attempt but yeah she's getting fixed up slowly we painted engine bay green on Saturday night as a nod to the donor as it was his first car but I'll be sure to get you the yt chanel showing the resurrection when I get it I believe this week or next am doing the wiring and putting the engine in
@bvcvcc12894 ай бұрын
WARNING: the silica will probably make the metal impossible to paint again, unless silicone remover is used.
@funksterdotorg4 ай бұрын
Why would silicone (a polymer) remover do anything for silica dust? You just need to wipe the surface down as you normally would before paint.
@waboom2483 ай бұрын
Silica and silicone are not the same thing. But I applaud your enthusiasm.
@thisissoeasy5 ай бұрын
Short and sweet! Brilliant! Thanks from Outback Australia...
@madvelila5 ай бұрын
This is something that should be in every camera! ❤
@Kendall-Brown5 ай бұрын
Would love a schematic, like the other two commenters requested. I know that this is your project that you spent countless hours and money on. If you don't have the time or energy for a schematic, maybe some detailed pictures of the board so that the components can be identified? This is not a multi-layer board, correct? Just the traces visible on either side? Any software flashing that needs to happen to any of the chips onboard? Would love to replicate your project and share resin printed components with you.
@lucasgabmoreno5 ай бұрын
Works in Blender 4.0! But don't install it as a zip, just add .py file
@jansenart05 ай бұрын
Attach the bottom of the grater bowl to the grinder. Make a circular shredder top. Grind the panko into the catch as it rotates.
@andycrighto37405 ай бұрын
My glass is flat,, ive trammed the bed and the nozzle is nearly touching the glass in the centre but just scratches the paper in the 4 corners. Ive bent the bed rod brackets into alignment and it hasnt solved the issue. Any idea where else to look? Im thinking of trying to bend the x axis brackets but im hoping if anyone has any idea they could let me know. Thanks
@andycrighto37405 ай бұрын
What i believe is happening is something is causing the tool head to lean forward as it travels toward the centre of the rods pushing the nozzle down ever so slightly.
@NTSRFR46 ай бұрын
I have used all purpose kid's glue/gel that comes in a gallon jug from Walmart, Hobby Lobby, etc. They also use it for making slime. It's not like Elmer's glue. I have mixed it with muriatic acid to make a brush on rust remover, but I haven't tried it with phosphoric acid yet. It works good though.
@hineko_6 ай бұрын
For those who wish to experiment, try Xanthan gum and Guar gum as a gelifying agents. Both are cheap, resistant to acids and inhibit steel corrosion
@nmtopbusiness30956 ай бұрын
Good job Please can you write all the chemicals name in Comment
@lougarcia14857 ай бұрын
The back left corner cannot seem to level on my anycubic mega s. Very frustrating.
@mikemontana74367 ай бұрын
What brand of paint are you rolling on (the white paint)?
@funksterdotorg7 ай бұрын
It's an own-brand 2K epoxy primer from my local supplier, Jawel Paints.
@johnk90558 ай бұрын
Nice tech Tipp!!
@0neBadMonkey8 ай бұрын
So jealous
@mrozzyfudd8 ай бұрын
I have just acquired a stripped 1967 GT that i will be restoring over the next few years. I will be following your progress keenly
@cesarkero8 ай бұрын
Thanks a lot for creating this tool. I confirm here that it works also in Blender 4.0, but, you have to do a simple thing before. Instead of instlling the .zip you have to intall the extracted ".py" file. Done. Again, good job✌
@funksterdotorg8 ай бұрын
Thanks for the info! I really should get round to fixing the zip install on newer blender versions :)
@ratgreen9 ай бұрын
Nice idea. Now I want to try mix fumed sillica with some evaporust and see if that works. On the phosphoric acid note, I was always told and read that you are meant to rinse areas off with water after treating rust / etching steel with it? Is it better to leave it on? I find it leaves a white powdery texture sometimes.
@funksterdotorg9 ай бұрын
I have found that rinsing it off completely with plain water will allow some areas to flash with rust again, but rinsing with very dilute phosphoric seems to prevent it. I guess most of the time if you wipe down with water, enough of the phosphoric that's on there will end up in your bucket of water that it's no longer just plain water anyway, so it should be fine! Does anyone know what's in Evaporust? Would be interesting to know if it works when gelled, I wonder if it is concentrated enough?
@hserieshooligan19975 ай бұрын
@@funksterdotorgI've heard evaporust is edta (ethylenediaminetetraacetic acid), when I use commercial gel rust removers I simply wire wheel after a day or two then wipe the excess off with a rag and use white spirit. I like to follow up with bilt hamber hydrate 80 before epoxy primer 👍
@tconbo45149 ай бұрын
Where did you get the phosphoric acid?
@funksterdotorg9 ай бұрын
I found it on ebay, but I think it was from a swimming pool supplies company so you might have luck at a similar place :o)
@WilliamVG9 ай бұрын
Thanking for sharing, this will help me with my phosphoric acid derusting project. My first attempt at making a gel was using ethyl alcohol from hand sanitizer, mixed at 10% . Worked ok. Cheers!
@stephenwhite49510 ай бұрын
Very nice work . Good to have sense of humour !
@herberar10 ай бұрын
Sparrows trust generous people! Thanks for the tip!
@johnhaylett576910 ай бұрын
Is the wood finish real rose wood?
@teguhpratikto331511 ай бұрын
Really pleasing content to watch. You're a multi talented man. And that rust remover gel is absolutely mindblowing! big thumbsup!
@funksterdotorg11 ай бұрын
Thank you! Glad you enjoyed :o)
@teguhpratikto331511 ай бұрын
Great knowledge you've shared. How long did the formulation completely removed the rust after you applied it? and how long the consistency of viscosity for this formula? Thanks for sharing this amazing video
@funksterdotorg11 ай бұрын
How long it takes depends very much on how bad the rust is - areas with severe pitting take much longer, and need multiple applications / scrubbing with a wire brush to really get into the pits (have a look at my MGB episode 2 to see it in action). It stays in a consistent gel state for quite a while - it's still perfectly usable after a quick stir after sitting for a couple of weeks. It does slowly start to degrade, I guess the acid reacts with the silica a little bit, but it doesn't go bad as such - just gets runnier and loses some potency.
@teguhpratikto331511 ай бұрын
@@funksterdotorg noted this important explanation, and i'm rolling to MGB episode 2 right now. thankyou, bro
@alastairstott6523 Жыл бұрын
Can you cone and help me? Ive got 77 sqm of boat to do. Above me
@torque-drive2488 Жыл бұрын
I got my first car, a 1967 MGB GT recently, and it's in a similar condition. I'm not sure if it's worth fixing
@funksterdotorg Жыл бұрын
Money-wise, it almost certainly isn't worth it. It's only worth doing if you actively enjoy doing some extremely tedious metalwork - my motivation took a dip last winter which is why there haven't been any updates of late. If you just want to drive an MGB, sell your basket case to a keen tinsmith and buy one that's already roadworthy. You will come out ahead on time, money, and sanity.
@torque-drive2488 Жыл бұрын
@funksterdotorg yeah I've made that decision last night. I would love to fix it, though. I just don't have a welder or any welding experience
@dkjawahar-techexpt671 Жыл бұрын
Thankyou for sharing useful information,from Jawaharlal Bharat INDIA 🙏
@skylertot5026 Жыл бұрын
could such contraption be used for meringue? as the final product is as stiff and waterless as breadcrumb
@funksterdotorg Жыл бұрын
Sure, I don't see any reason why you couldn't put meringue in a lathe. Please speak to your tooling supplier about what inserts would work best.
@Blenderislove Жыл бұрын
hey, any plans to update? cant get it to work on 3.5 and above. it says module installed but it does not show up in the list
@funksterdotorg Жыл бұрын
I will have a look soon! I guess they changed the API a bit in 3.5...
@Blenderislove Жыл бұрын
@@funksterdotorg tin2tin forked your code and made a working correction. Thanks to both! I find this very useful
@funksterdotorg Жыл бұрын
@@Blenderislove Gotta love open source eh! Props to tin2tin for the prompt fix
@thejeidi7228 Жыл бұрын
I love your videos what are you using as your power supply. I can only find DC power. no variable AC.
@funksterdotorg Жыл бұрын
It's called a Variac - a variable ratio autotransformer. Overkill for this, and doesn't provide isolation from mains - finding a regular isolated step-down transformer and setting your electrode distance accordingly would be a better plan.
@fivish Жыл бұрын
I had the 626 to drive my BC1's. It was a very unreliable bit of kit. Blew the power chip under warranty then blew the output driver transisters. Enough! I purchased a Sansui R50 was has given excellent fault free service for 40 years.