Danger Dave

Пікірлер

@maddogg26 Ай бұрын

A billet flywheel would be nice

@cafemotorsports 2 ай бұрын

Looks good. What radiator and exhaust manifold is that?

@abefarrar 2 ай бұрын

How did you get the deck pulley of the engine? I’m trying to pull my engine but can’t get the pulley through the hole or get the pulley off 🤷🏻‍♂️

@JoeTaco83 2 ай бұрын

What Radiator did you get.??? The only one I could find that fits good is the one for a 92-00 Honda civic.(mods required).

@DangerDave95 2 ай бұрын

@@JoeTaco83 it's an extremely rare aftermarket radiator made for a festiva. No longer made. I only know one other person with one. You will have to go with the Honda Civic one if you want better cooling.

@chuckvenable4409 3 ай бұрын

You should definitely first mount your camera phone onto a tripod before being the expert as you are fumbling around with the air filter adapter kit. 😮 Once that's accomplished, then move on to the filter kit installation. A one handed expert when you've got 2 hands isn't very professional at all. 😅

@Como651 3 ай бұрын

I just bought a Champion radiator for my 1988 Samurai that looks nearly the same as yours but the hood hits it. I noticed your new radiator looks slightly taller. Did you have any issues with it not clearing the hood? Did you have to make any mods to clear the hood?

@arianorta4332 3 ай бұрын

Does this work for a 224 cc predator? Do i have to remove the governor?

@minlwin6312 3 ай бұрын

verygood

@papaw5405 4 ай бұрын

That's going to be a Cool Car!

@MarshallisLost 4 ай бұрын

I need my engine bay this clean!

@mexx69 4 ай бұрын

it reminds me of a jdm type car. i really like these cars. im hoping to buy one off my local pull a part and turn it into a lil project car for fun. i like the 80s-90s cars but theyre not super comfortable. my 09 corolla s is a good mix between comfort and cheapness.

@Kieran-by4rv 4 ай бұрын

do you know what a rebuild kit for this would be called? this is the same as my drz 250 2015 cant find rebuild kit online...

@dunstanlataille4937 5 ай бұрын

We're did you get the blue wire from send the link for dem

@dunstanlataille4937 5 ай бұрын

Send the link for the headers

@chrisboucher2813 5 ай бұрын

What exhaust are you running on that thing? It sounds wicked! I need to replace my headers it's cracked really bad, I got a Sammy similar to yours

@DangerDave95 5 ай бұрын

Long tube header to 2.5 pipe and a single chamber muffler.

@stevensmith8285 5 ай бұрын

Fellow Carolinian 🙋🏾‍♂️

@bjjamison2117 6 ай бұрын

I love Ford Festivas I’m looking for I’m buying a red one I am a ruby red 1991 Ford Festiva or a 1992 either way the car is beautiful it’s small and I know how to use the seatbelts correctly in automatic transmission 😊❤😍☺️💕😇🇫🇮🇺🇸🏁🎉 ford Festiva madness I love it and it's also the most enchanting car I've ever seen in my entire life I really should get one

@AChi__ 7 ай бұрын

nice engineering 👍🏾👍🏾

@fishmidi19 7 ай бұрын

Would it be possible to have more spread between the two sets of rear tires, to have a dump truck function sort of deal on the rear? Asking for a friend :)

@ronniemassimiani7545 8 ай бұрын

So you can run the intake without changing the main jet

@EconoboxGarage 8 ай бұрын

When I see videos like this I wonder how many of those Festivas have parts on them that I sold!! Considering a trip for Madness XX in 2026!

@The1965catalina 8 ай бұрын

So you don't have any videos of your own

@DangerDave95 8 ай бұрын

What?

@dazzazulu777 8 ай бұрын

I had an 89 Festiva L…manual 4spd 3 cylinder. With no air….i smelled like fried chicken in the summertime. It did come with a Blaupunkt SQR29 pullout though.

@DangerDave95 8 ай бұрын

Cool. They never came with a 3 cylinder but with old age they tend to turn themselves into a 3 cylinder lol.

@J.Wick. 8 ай бұрын

Great car, great road.

@emmanuelpiedra5816 9 ай бұрын

How about this car?

@joshuathompson2131 9 ай бұрын

Nice Puddins Fab Shop decal. If you want a mazda 323 1.6L engine you can have mine. I'm taking it.out to swap for a 1.6 b6t engine.

@DangerDave95 9 ай бұрын

Thanks but I have since swapped for a 1.8l BP from an escort GT. I've been meaning to do an update video on it but I've been crazy busy.

@joshuathompson2131 9 ай бұрын

@DangerDave95 yeah I just say your short video.

@noahdunaway 10 ай бұрын

What oil filter is that I see on the engine ? I have a 1996 Tracker 1.6L 16 valve and researched the oil filter crossover and found that the K&N HP-3001 fits and gives you about a half quart more oil capacity.

@DangerDave95 10 ай бұрын

I use motorcraft FL-400S. Good cheap filters. Has the anti drain back valve.

@noahdunaway 10 ай бұрын

@@DangerDave95 if you want a little more oil capacity you can use a FL-1A Motocraft , that is what crosses over to a K&N HP 3001. They both have anti drain back valves but since the filter is mounted on a downward angle you really don’t need it. With the bigger filter I’m able to put a full 5 quarts of oil in it. It calls for 4.4 quarts and on my dipstick with the bigger filter 5 quarts is just over the full mark. On all my vehicles I like to use as much oil as safe to do because the oil is part of the cooling system so I usually fill the crankcase to about 1/8” above the full mark. Most engines can be over filled a quart of oil and you only get in trouble if you put two or three quarts over the recommended amount.

@jamesgrierson3052 11 ай бұрын

Which jet is meant to be bedded then wound out two turns? Thanks

@Scott-i3h 11 ай бұрын

How about this with duals on both axles. Never stop it but it would Need a diferential to help it turn.

@Scott-i3h 11 ай бұрын

Cool

@keiththompson1160 11 ай бұрын

hey i like the new engine

@boeing737d Жыл бұрын

Bad ass car dude! In the past week, I have been looking for Ford Festiva and been having hard time finding them. Any ideas where I can find them?

@DangerDave95 Жыл бұрын

The majority of them are in North and South Carolina lol not sure why. I have 3 runners and 3 for parts.

@boeing737d Жыл бұрын

Are you selling one of them? @@DangerDave95

@dylanrav Жыл бұрын

love the build! where did you get all of those blue silicon pipes?

@dylanhuggins3359 Жыл бұрын

What front splitter is that it’s really nice,I saw your mx6 on marketplace and decided to get one for myself bc I loved the look

@DangerDave95 Жыл бұрын

It's a universal lip I found online a few years back. I had to modify it quite a bit for it to fit. I still have the car and decided to keep it after dealing with no shows and scammers lol.

@dylanhuggins3359 Жыл бұрын

@@DangerDave95 your cars what inspired me to get one