Great info Joel. Appreciate it man, i'll try that on my squeaking cheap release. Hope all is well.

Hey man great video! Are you gonna make any hunting videos this year?

Thank you for the information

Back in the 70s and 80s all compounds were longer. 35" would be unheard of and short. This guy wouldnt have bowhunted

Congrats on graduating brother.

I have same 10/22

You have to tune and balance the arrow as well!-not just tuning the bow! This is extremely important for pin point accuracy …understanding arrow harmonics/bending and flexing of the arrow in flight/dynamic spine….understanding your numbers KE/momentum, FOC, shooting the correct spine…understand your equipment and a deers body language…read the Chuck Adams article-the shocking science of string jumping…a mechanical broadhead can take anywhere from 3X to as much as 6X as much force needed to penetrate compared to a fixed blade…are you going to be lethal at 50-60-70-80 yards with a mechanical and your setup-even with a perfectly tuned and balanced arrow and bow? Watch here on youtube: Bone Collector arrow bounced off a booner…why did that arrow fail? Deer was shot at less than 30 yards…why do so many hunting videos show ppl shooting a compound bow at a deer 20-30 yards and maybe only getting 5-6 inches of penetration and having to track that deer for hours or never recovering? Understanding your KE/momentum numbers and how much is being taken away by that mechanical broadhead is the answer…there is alot more to this than just the bow

I learned importance of tuning when I did my first string change on a bear limitless it was my first bow. Getting ready for season my broadhead was hitting 8 inches right of my field point at 20 yards. I went to the shop and they had to adjust the yokes to get me flying right again. I wouldn't have been able to move the rest enough to get them impacting in the same spot.

There is no problem hunting with a 35 especially as big as you are it shouldn't be a thing

Hey man. I have the new lift and I’m pretty sure your 31 is the same way. What way do you run your fletchings in your rest to keep it from hitting stuff on your bow?

What lighted nocks are you shooting with your victory rips?

Good luck opening day.

Why dont you like bowtech? Just curious.

I shot threadzs for years with no issues... Most of the time when you have a separation there is caused from over-tightening the loop or using the loop to counter rotating strings. You can also have that issue if you waxed the string where the serving goes.. Clean all the wax off and reserve

That b3 sight looks nice man. I used to have the cheapest b3 exact. It was the 100 dollar one. It was nice, just barebones.

For the podium stabilizer do you have to use their podium weights? Or can I order some sort of universal weights instead?

Im running sonic 6.0 in a 300 spin with standard inserts and 125 grain Sevr 1.5 hybrid and for fletching I’m running the 3 inch 2 white and one is red white and blue totally arrow weight is 432 grains this is without a lighted nock. I’m shooting around 286 fps and it’s very accurate. I am considering changing to the 4mm long range next year.

GR Micro Hades; GAS strings. Beast broadhead is ridiculous sharp w/chisel tip for mechanicals. Beasts are on back order, but worth it if you need a late season mechanical 🤘🏻 Good luck this season! PS, AAE HP vane if you’re running the exodus, or any fixed 3 or 4 blade. I’ve found they steer notably better 👍🏻 God Bless

Great vid young man.

One word...... Money $$$

I’m running a Darton consequence with a front bar on an offset bracket. Playing with the weights still but about have it so that it offsets the quiver weight well. Hoping to sell my VXR 31.5 as much as I want to run them I just get too torquey with that era of Mathews bows.

60 is way more than what you need to kill a white tail the furthest you’ll shoot is 40 yards

Come on gentlemen play nice. If you want to buy expensive arrows, get you a couple dozen bishop or you can buy a new pick up pretty close to the same.

Thanks man i appreciate it! Im definitely gonna start doing it this way.

lift

Nice vid brother

Rip TKO partnered with UltraView to make these arrows.

Everyone wants the highest quality hunting equipment. Whether it’s arrows , sights, even bows but no one wants to pay the money. They complain too complain. UltraView is in my opinion on top of their game. Quality is outstanding and I don’t mind spending the extra money because I know the product I’m buying is the best of the best..

That video was hard to watch.😢

I wouldnt do anything less than 550. I shoot 510 normally for whitetail. Just do some dr ashby research. Which were done on animals thos big. It will tell you what you need to know.

Have too many bows, PSE brute nxt, PSE supra max, bear Alaskan, bowtech ss34, my newest. I have a problem. Only been shooting a bow for 2 years. Also have bows for my daughters, Genesis, barnet youth compound, and diamond razor Edge. I run front and rear bars on all but the Alaskan, that I have 4oz bolted through the lower quiver mount and a 8 in trophy ridge with 3 oz up front. Balances nicely without rest bar. Chris Bee is on of the people I have watched since I started out in archery. It was a sickening feeling, I didn't watch the whole vid. I was surprised. I think he is under too much pressure to prove their product, and just wasn't thinking about what if I miss. Everyone makes a s*** shot once in awhile. I do hope that he does feel bad about that, maybe he'll wait next time for a better shot. I'll still watch Chris, but like I said every hunter has a bad shot. And in my opinion if you say you never took a bad shot then you're lying.

Any tips on draw weight strength im at 60 pounds at 14 but i feel like i need to pull more how can you pull so much

Ur probably my favorite youtuber because you know what your taking about and I think we relate

NONE of his arrows went fletching deep. It was embarrassing to watch it.

Id use the same arrow I do deer hunting. 650 arrow, rip tko, 200 grain single bevel , 125 ethics insert outsert. FMJ are trash, heavy overall vs foc heavy.

Dr. Ashby had so many pass throughs on quartering to shots with a recurve.

I have the b3 exact rize hunter single pin I can’t find my instructions no where is there a video on how to sight in with which tape or anything and what number yardage to sight in to divide to get the rite tape

Elite Envision...Jon has stated in multiple podcasts his reasoning for the move back to Hoyt, he wanted to end his career with his friends. The president is a good friend and tournament buddy from his early days as well as a couple others. PSE signed a 5 year with him in order to get the company ready to be saleable, by designing new products that would place them in a good position in the market. Hoyt and PSE the largest target offerings, Mathews has 2 (new) target bow and loads of advertising dollars for shooters. Hoyt dominates world markets especially in target.

I really like my pse fortis 33 e2. Haven't shot a Mathews. John Dudley went to pse 5 years ago knowing he was going to help their brand prepare to be sold. Personal opinion and some interviews I've seen.

Nice video!

I like Hoyt and Mathew’s but I prefer Hoyt

Thank you for the videos. I wonder how the exalt’s draw cycle compares to the verdict or ethos? I am looking at the exalt for an indoor and 3d bow. I am also wondering how it compares to the reckoning 36.

I really like Elite bows as a brand, I really want to shoot the Exalt 35 to me they are some of the most stable bows I have shot and they have a lot of adjustment to make them feel like I want. To me that’s the one of the worst thing about Mathews bows is they are just not as adjustable as Elite or Hoyt now.

He made a very good decision go team Hoyt

This guy's definitely not a spot and stalker

Dude Hoyt VTM is 31 and could probably get it right now $1000 maybe lower. You racked your brains over a bow just to settle on what you already had your gonna be grey headed by the time your 20

Catfish customs out of Michigan has phenomenal pricing and customer service. They use waxless, much lighter strings with bloodline VEC99 material.

I have a 75lb Mathews and I shoot "Vapor Trails" I do get some serving separation. maybe apply a bit of string wax prior to adding serving?

I've used the Rips and Sonics The Rips at 300 spine were awesome The Sonics , to me , were on the fragile side. Grim Reaper Mini mags are unstoppable.

I get what your saying, but when you make that practice shot or that hunting harvesting shot, you still need to understand it's gonna boil down to the skill of the archer as long as your shot hits the kill zone, a good shot is a good shot