Which font is that?

Was this on a 20W machine? If so would the 10W work with this?

Thanks so much Lonnie! Just got my machine and these videos are a God send!

How do you do a test

Thanks for sharing. Learning a lot.

I googled an online convertor. I tried the one from Adobe, called Adobe Express. It seemed to work ok.

Thank you so much. I am learning so much from you. Please continue to

Thats awesome and seems pretty easy. So the .18 is always the gap for the beam right?

Mr Lonnie I order acrylic from WeCreat and it came with just clear plastic covering. So I assume I would have to remove it before cutting or engraving because of the chance of a fire. Do I still use the settings you used if it doesn't have the paper covering? Also, do you know if there is a way to order that paper covering? Maybe a link to purchase it from? Thanks for all the videos you make and sharing your knowledge with us newbies.

THANK YOU! EXACTLY WHAT I NEEDED!

Is this the same process for a Vista? My laser is not engraving per the placement on my PC. It is pulling down about 1/4 of an inch. if it isnt what can I adjust? Ive already calibrated the camera twice/ Thank you.

Hi Lonnie. Thanks for all you insight. Could you explain how to use the matrix to customize the boxes? Want to create a multiple tray with continuous walls but not sure I am making it right. Since my laser has a working space of 12x24 would the measurements be 100x3cm ? What about how tall? Can I do 200x 3cm? Thanks for your help

Am I the only one that thought it said 'farts' instead of 'parts'? Had to look twice.😮

Thank you

Awesome feature. Thanks for covering this!!

Very cool. Thanks

Thank You!

I love your videos they really help me

Kinda like Break Points

Thank you thank you!!!

I think Santa is brining me the upgrade kit. I really like the new jaw design, but I also like the fact that it offsets the part so you don't lose as much printing space since it moves it out further. Thanks for the review and also the other video that shows the variety of ways you've configured things.

Nice Swiss Army knife. Don't see those much on KZbin these days. Everyone seems to want some fancy blade. Nothing like a good old reliable Swiss Army knife.

Thank you for sharing this video. it is an excellent and beautiful idea and that at the same time we recycled and helped the environment. it was spectacular I love it 😍

Thank You Lonnie, great video. I got mine on Monday, I have been making a tumbler everyday and have not had any problems.

Hi, did you mean to put 400 as the speed on a 20 watt mine only goes up to 100

Thanks Lonnie!!

Thanks Lonnie, another great video

Thanks for the hint on the Processing Order menu. I agree that Auto Arrange is probably the safest bet, but I'm glad we have the layer option so I can tell it what to do first. I did a box the other day and it cut out the box pieces and then tried cutting out the pattern in the sides. It worked, but I would have rather it cut out the patterns first and then make the cuts around the edges of the box. With layer arrange I can put them in the order I want and then it'll do what I want. Thanks.

Sorry for commenting so much, but I think your videos are helpful, but then I come up with suggestions or questions and I can't help myself. For the subtraction tool, I am confused how it works. For example, when you put the circle on the rectangle, it subtracted the circle, but it could have subtracted the rectangle and I didn't know how it knows. I thought that it was a layers thing, so I went into the software and tried rearranging the layers. Unfortunately that didn't seem to change things. Then I was looking for an arrange feature to move them forward or backwards. From what I can tell, new shapes are placed above the previous shape. This then creates a scenario where the software subtracts the top shape from the bottom shape. What's even weirder is that I had three shapes, selected all of them and the top two disappeared from the lowest shape. Without the ability to control the arrangement, you're stuck with the order that you put them on the workspace. If the software people can add the arrange feature, or make it tied into the layer definitions, that would be helpful.

Why does my laser continue to say Failure to Refresh the Background?

One suggestion I'd give for the test arrays deals with how dark the text is. Normally the text is too light for me to read, so I have to ungroup everything and put in my own settings for the text. I'm not sure why the values are so low, by default, but that's what I have to do.

Thank you these are really helpful videos

Rotate? My software( i check every time I use my laser) which says it’s the most up to date, doesn’t have this! I am surprised. I think there are various versions and we all don’t get the same updates.

Thanks, Lonnie!

This is a cool ideal that I haven't seen before. I've wanted to do some mandala art with a bunch of layers, but I hadn't thought of creating my own layered project. Thanks for the inspiration.

I thought I understood how the dpi would affect the results by making edges sharper but I didn't expect it to make the engraving darker. It seems to affect the power of the laser, or maybe it is just doing more pulses in the same area which makes it darker. If I could make a request, I'd like to see an image with a lot of tonal variations printed with the different algorithms. I don't often get a lot of shading in my photo prints and I don't think the system has the ability to moderate the power, so it seems like pixel size and density are the only two variables we have. From what I understand, the algorithms are where we can modify those parameters. Thanks for keeping the videos coming.

Thank you so much for this amazing video! I have a quick question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?

Thanks so much!

Spacebar will also bring up the hand. 😊

I tried the set of 3 oldtimey looking ornaments from makeit and was disappointed that after they engraved and were beginning to cut I noticed “Christmas “ was spelled CHRRTMAS. SO look very closely before you start up your machine.

Could you please do a video explaining the DPI? Thank you..

My auto focus keeps lifting about an inch right before it starts to laser and engraves like crap. I haven't changed anything.

So on the second one that's said color does that mean you left it color and didn't change it to grayscale?

I thought you'd send the photo into another program where you could "dither" the image. I've seen other videos where they do that and you end up with an image made of a ton of little dots, kind of like in a newspaper. By changing the size and density of the dots you can get better variations of light and dark. Have you tried this technique?

Please where can I get the link to the clips?

That's great, thanks

Thank you for sharing this!

Thanks for sharing. Unrelated question, any recommendations on a masking tape that doesn’t cost an arm and a leg?

The dot autofocus is a very helpful tip. Thanks as always.

Interesting. I didn't realize that the head would be so close that it would run into the pie. Looks like flat pies are a better choice. Thanks for sharing your experiments.