How did you do a 12 x 18 cutting board if the working size is 16.7 x 11.4?
@CricuterСағат бұрын
Because the dimensions of the design were under 16.7 x 11.4"
@buddysmith708013 сағат бұрын
I saw how you centered the design vertically, but how do you center it horizontally? None of the videos I have seen have shown this
@CricuterСағат бұрын
I made an X with chalk to find the center of the whole cutting board. Then I lined up my design in the middle of the X.
@buddysmith708014 сағат бұрын
Do you have a video showing how you engrave the top and bottom of the 40oz tumbler?
@buddysmith708014 сағат бұрын
Excellent video. Thank you. I see we need 3/4" PVC to go with the extender, but I don't see where it says how long it should be.
@terilemaster440517 сағат бұрын
Thank you for sharing these scams.
@CricuterСағат бұрын
You bet! I wish I could get everyone to watch this video! The amount of scammers I see in unmoderated Cricut groups is insane. I think a lot of the Cricut groups are actually RUN by scammers.
@srslyallthegoodhandlesaretakenКүн бұрын
It was a very helpful video, thank you! I was left curious about the cost of materials, and not just the cost of the Cricket or the dollar store glasses. What about the materials you had to buy, which I'm sure wasn't cheap.
@CricuterСағат бұрын
The materials you buy depends on the project but with the wine glasses, you would only need vinyl and transfer tape. A 12" x 6ft roll of ORACAL 651 Permanent Vinyl is $5.10. The transfer tape I buy is $15 for a 12 x 50 FT roll. Since both of those things come in huge rolls, you use them for a long time across multiple projects. The amount of vinyl and transfer tape you would use on a wine glass would be like pennies.
@taurinitaКүн бұрын
Svg is the only file can be used to engrave ??
@CricuterКүн бұрын
No you can use other file types
@taurinitaКүн бұрын
For example !???? Please
@Cricuter56 минут бұрын
@@taurinita MakeIt currently supports SVG, DXF, PNG, JPG, JPEG, GIF, WEBP, and BMP file formats.
@joeuser20123 күн бұрын
I learned a trick on my own... If you want to engrave the entire height of the tumbler. Use the 3 metal pegs that come with kit and place them inside and reverse the chuck until they touch the inside wall of the tumbler. Then pull the tumbler away from the no working area and stretch the pattern on the entire height. It works fine for me. I had a customer that insisted on the entire tumbler and I had to please. Good luck dear
@Cricuter2 күн бұрын
That's a good idea! I started using this tumbler attachment amzn.to/3N0hY3p to extend it past the no work zone. You can see how it works in this video - kzbin.info/www/bejne/h53FfZqGZpt4aK8
@joeuser2012Күн бұрын
WOW I'll look into that @Cricuter
@criscoxcris_190_malnur63 күн бұрын
I have the 20W and just installed the 2W thanks to your help. Can I still engrave tumblers with the 2W or do I need to swap back to the 20?
@Cricuter2 күн бұрын
I think you can but it takes like 5 hours. I haven't tried it yet though.
@virginiaknox82694 күн бұрын
Will this machine apply rhinestones?
@Cricuter2 күн бұрын
I'm not sure, I've never worked with rhinestones before.
@Cricuter4 күн бұрын
👉 Check out the xTool M1 Ultra here: www.xtool.com/products/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine?ref=wWfNgIkcSEyb7& use the promo code "Cricuter" to save on your purchase!
@Cricuter4 күн бұрын
Watch the full video here: kzbin.info/www/bejne/gXSckqxpabGdrJY
@diannewhyte-ellis30185 күн бұрын
Good Mornng; Thank you very much. Im a newbie. Just got my cricut machine
@Cricuter2 күн бұрын
You're very welcome! You're going to love it!
@greedygamblerslots5 күн бұрын
Do you have many tutorials on it yet? Price?
@Cricuter4 күн бұрын
Watch the full video here: kzbin.info/www/bejne/gXSckqxpabGdrJY 👉 Check out the xTool M1 Ultra here: www.xtool.com/products/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine?ref=wWfNgIkcSEyb7& use the promo code "Cricuter" to save on your purchase!
@nancymsimmons5735 күн бұрын
Just saw this video and immediately ordered it and hit the subscribe button! This is an awesome find. Thanks so much for sharing. ❤❤❤❤❤❤
@Cricuter2 күн бұрын
Awesome! Thank you! It's such a great adapter it works so good!
@KateJames-k5x7 күн бұрын
Thank you for a clear and informative video ❤
@Cricuter2 күн бұрын
You are so welcome! Thank you for the kind comment!
@Wendym09067 күн бұрын
the sound in the video is really bad :( I can barely here you
@Cricuter2 күн бұрын
I apologize. This video is old and I've upgraded my audio system since then. You should find my newer videos to have better quality.
@karlaroberts67547 күн бұрын
Great video. It just gave me anxiety that you didn't use butcher paper to protect your tumbler press from ink blowout.
@Cricuter2 күн бұрын
Haha I get that! I didn't have any at the time, but I do now! I've actually never had any kind of ink leakage when sublimating.
@johnjohnson90038 күн бұрын
All about htv font 😂 yall stop believing all you need is name brand lol
@Cricuter2 күн бұрын
I don't care about brands, I care if it works! HTVRont has great stuff.
@evieb939 күн бұрын
I'm thinking of getting this as my dedicated tumbler laser
@Cricuter2 күн бұрын
Sounds like a great idea! The only thing to keep in mind is that it's only a 10w so engraving time is slower compared to the 20 or 40w Visions. If you only make tumblers every once in a while then it's perfect. But if you need to make a ton for a small business, I would choose a higher power one.
@daughteroftime80479 күн бұрын
Time wise, how does it compare to the 20w when doing a 40oz tumbler?
@JoeyMassie11 күн бұрын
Can't wait to see your Vista tumbler video!!!
@Cricuter11 күн бұрын
Coming soon!
@JoeyMassie11 күн бұрын
This company is so cutting edge!! Bang for the buck this is the machine to get!! I have and love the Vision 20w and still want one of these!
@Cricuter11 күн бұрын
I totally agree. You'll never find another laser at that price point that's enclosed with a camera, laser cuts 6mm deep and engraves wood, does huge 40oz rotary engraving, metal engraving andddd super long wood projects. Plus the work area is pretty big and it can be raised for larger objects. It's pretty much a no brainer.
@akikia082011 күн бұрын
Ready to buy asap... Do they ship to Japan?
@Doityourselfwithjoe11 күн бұрын
Is this machine just an engraver or does it engrave and cut?
@Cricuter11 күн бұрын
It cuts, too! Up to 6mm Basswood
@MQ-cj4tc11 күн бұрын
Really nice, quick question? What is the difference between the Vista 10W Rotary Pack - White and Vista 10W + IR Rotary Pack - White. Is the first one not able to handle tumblers or metals etc? Additionally, is it safe for a home setup in terms of electricity consumption and voltage?
@Cricuter11 күн бұрын
The one that says IR comes with the 2w IR (Infrared) laser module. This allows you to engrave shiny metal objects like jewelry and knives. The first one cannot engrave metal. It's safe to use in your home. I have it plugged into a normal 3 prong outlet in a bedroom (office) in my house.
@virginiadancy721012 күн бұрын
EXCELLENT presentation - crisp vibrant color tumblers, thank you so much.
@Cricuter12 күн бұрын
Thank YOU so much! Your kind words really put a smile on my face 😊
@Cricuter12 күн бұрын
Watch the full VISTA demo here: kzbin.info/www/bejne/e6K9oKKpj9WDfbs
@Cricuter12 күн бұрын
Check out those early bird deals - shrsl.com/4ok9f
@checkitoutwiththeadamcheck992012 күн бұрын
Thank you for this video!
@Cricuter12 күн бұрын
You bet!
@checkitoutwiththeadamcheck992012 күн бұрын
Wow! I love it
@Cricuter12 күн бұрын
It's such a great machine, especially for that low price!
@deborahmartin756312 күн бұрын
This machine is awesome! I can’t wait to buy one ❤ Thank you for sharing this video
@Cricuter12 күн бұрын
You are so welcome! You're going to love it!
@kerrbearscreations810812 күн бұрын
WeCreat has the coolest lasers
@Cricuter12 күн бұрын
They sure do! They're always coming out with new innovative technology!
@ICanTotallyMakeThat-c2l12 күн бұрын
That's a really cool machine!
@Cricuter12 күн бұрын
I agree! I love it!
@floofyfarm-gx3cb12 күн бұрын
What an awesome machine!
@Cricuter12 күн бұрын
It sure is! Don't miss out on those early bird deals!
@anitabond218412 күн бұрын
Genius ❤
@Cricuter12 күн бұрын
I'm glad you like the idea!
@carmensantiago951413 күн бұрын
Thank you very much for helping me to understand how to work with the heat transfer vinyl everything was well explain and clear thank you very very very much
@Cricuter12 күн бұрын
You are very welcome
@karenjones315515 күн бұрын
4 min. Into this video and you’re still talking about everything other than your tutorial.
@Cricuter12 күн бұрын
I'll try to be more concise in the future, thanks for your feedback!
@Innerlightheals16 күн бұрын
Best video. Simple and to the point. Thank you!
@Cricuter12 күн бұрын
Glad you liked it! Thank you!
@shavonmccoy185317 күн бұрын
This is SOO COOL 😮❤ great job explaining the details! Can’t wait to try it !!
@Cricuter12 күн бұрын
Have fun! I bet it'll turn out great!
@brittanymalloy163517 күн бұрын
What's the machine you use to measure the board?
@Cricuter12 күн бұрын
I think you mean digital calipers? amzn.to/3ZvvEuS
@cintiapena169618 күн бұрын
I dont think you can preview inside a zipped folder? I think you have to extract content and then the preview works. Great video by the way, thank you.
@Cricuter12 күн бұрын
I think you're right! Thanks for the comment!
@lynettemott305118 күн бұрын
Can you please share some settings and tumblers I’m really struggling I have the 40w vision and I’m Regretting not getting the 20w.
@shannonwilson109718 күн бұрын
Do you have to use HTVRONT sub paper any sub paper okay?
@Cricuter12 күн бұрын
Any paper is fine! I also love ASub amzn.to/3TzmQjs
@patricialooper620919 күн бұрын
❤l start watching your video when you start your business patty in Westminster md❤
@Cricuter12 күн бұрын
Hi Patty! Thanks for your kind comments and support!
@patricialooper620920 күн бұрын
Where did you get that at
@Cricuter12 күн бұрын
Hi Patty! Here's the Amazon link. You can also find a full material list in my video description. amzn.to/45pkdFC
@patricialooper620920 күн бұрын
❤how do you make them l have problems making them l don’t know how to make them lm just learning to make them
@patricialooper620920 күн бұрын
❤can you please send it to me patty’s in Westminster md
@patricialooper620920 күн бұрын
❤how do you get started with your business patty in Westminster md