fine presentation ! 😀

@loisfaruolo6932 I have a 12 volt Duralast AGM battery Cycling Charge rate 14.4 -15.0 v with a 13.5-13.8 Float charge What type would you say my battery is ? My 30A topsolar controller connected to 200 watt panel is already preset on type 61

Where are your links to the items 😳. What pre filter are you using🤔. Thanks

Thankyou for doing this video it's a great help, I will be subscribing.

Unfortunately I am still unclear on what is Watt Hours in the Yield? And Yes! The video is great indeed.

Just got a victron! Thank you for this a great walkthrough🎉🙏👌💯✨

Shurflo recommends not putting thread tape on the connections. Just thought you might want to know as it voids you warranty.

Too bloody complicated.

Hi can you tell me does the set up go…..water pump then accumulator then tap or does it go accumulator then pump then tap. Thanks

thats not how the street lights setting works

Hi great set up . Would just like to know how much pressure to put in the tank. Thanking you

I got a pump just no air tank

Where's the waiting explanation?

Hi watching this , im trying to set up solar heated water pump just to heat water for showers etc , but im using a surflow pump and noticing the in let pipe side sucks in / collapses why does this happen please cheers

Hi. Thanks for taking the time to make this video. But you keep saying to pull out the JG collet to pull remove the pipe. You push the collet IN to pull out the pipe. Also, you should install a clip so the pipe won't pull out.

can I ask how you did the template for the shelf please

Excellent presentation. I have this system fitted to my motorhome

love the vids, you guys still have the van? if so next update..... x

Till the end, I was waiting to hear how does it sounds when it is on. 😏🫤

Hello John, Did you just install the controller and let the controller set the parameters or did you adjust them? I really want a 'plug and play' scenario rather than mess about with the settings.

They look delicious! I like that you ground the seasonings and let the sauce carmelize. Where would we be without silicone brushes for BBQ?

You did that wrong twic... The tape goes on clockwis... So that when you screw the device on clockwise the tape doesn't back off.

What happend if your tank os empty? The Pump start working??

I hold several different licenses for many different things. One of them is a plumber. I just want to point out your Teflon tape you put on you put on the wrong way the wrong direction.

PTFE tape is poisonous!!!

I am confused as to how to plug in lights for the streetlight function. Is there an outlet on the charge controller or is that in another video?

I found you via Twitter. Thanks for sharing my post about coolers. I am curious, how your sprinter turns out.

Sorry but I found this video to be confusing and misleading. First of all you start by connecting the filter to the outlet port of the pump. Then you use PTFE tape which goes against the manufacturer's recommendation which is to "Never use Teflon tape or sealing compounds on threads". Not only that but you also slacken off the joint to get the filter into position which is likely to result in a leaking joint. The manufacturer also recommends that if you are mounting the pump in a vertical position then the pump head should be in the down position so that in the unlikely event of a leak, water will not enter the motor.

Great demo on the Victron SCC, best I've seen on KZbin. Thanks. - N Idaho -

Nice!😊

The Victron Connect features on the app are all well and good but useless if you don’t understand the terminology, e.g., “state of charge”. Finding a glossary of terms is impossible.

Hi good video , but what is hottest water temperature these can use to pump ? Thanks

what is 50% battery according to you? could you give me a voltage value? ive read online anything from 10v to 11.6v being the lowest acceptable level for a normal flooded lead acid battery.

Hi what thickness of pipping are you using and what sizes of joiners cheers

Hey Ben! Great channel and information, I am trying to understand my app more, I do not have the monitor installed so I just have my battery and MPPT on the app, but it makes it hard to judge how much charge I have especially if I am going into an evening with my fridge and lights on.......Sometimes my fridge turns off in the evening which isn't ideal and not sure why?

What size of hose you used

Could you please tell me why the pump could not be mounted on the floor?

Where did you get the connector from the pump to the accumulator? Been struggling to find one.

Maxx air deluxe fan installation in transit connect

Hi mate do you put a on and off switch on the pump

Thanks for the video, I am waiting to install water in my camper and I have doubts about using this system or 10mm and 16mm thick braided hose. Given your experience, what do you recommend? Thank you

Very informative video, do you have a victron DC to DC 30amp set up video on 200ah LiFePO4?

Very nice... Looks far more professional finish than I am managing...:) A.,

Yep I hope everything else went on the right way.

Nice job, I look forward to going through your other videos 👍

Hi I understand the cold water system and water being pumped, what I don't understand is how the hot water is being pumped with pressure. I have an old caravan that never had hot water or shower which is what I'm creating. My idea is to have a tankless gas hot water boiler in the caravans front locker(as these systems are for outside use and locker hatch will be open when in use). So my question is how is the hot water pumped with enough pressure to the distance of the shower inside and teeing off to the sink? 🙂

no need for ptfe and you are threading the wrong way round

Which adapter do you use to connect to a faucet?

Looks really good. I stupidly lost the bulkhead template I made so absolutely at a loss now as to how to do the front section. 🥺

How did you attach the strip lights to the vehicle?