working in a shop in bare feet....

I am going to use j channel for my clips

Looks great 👍 and that's how we learn with those little mistakes

What size pvc did you use for clips?

Looks like some of the clips on the under side would allow lose edge to wrap under.

Nice video. Thanks

Orca doesn't treat algae. Starting off with a light proof container is your best bet at preventing this issue from jump street. Keeping your water temps below 70-75°F will help you avoid algae and brown slime mold. As well as keeping your reservoir aerated. Happy growing.

Absolutely one of the best tips of all time.

Clonex

Why only 8 likes...? - This is a great tip - Thank you

Well Done I am impressed with you mad skills.

So THAT'S how air-assist driplines work!

My man I'm watching this video not because I'm gonna go buy birch I'm gonna go cut down a bit a** piece of my tree shape it sand it char it and poly it lol

I am going to try this method to waterproof my ground floor patios. There are decks for upstairs neighbors directly above both my front and back door entrances; these decks are not waterproofed. I would like to sit on my patios, protect my patio furniture as well as prevent rain from freezing in colder weather which is a slip hazard. Guess I will have to attach PVC framed waterproof tarp to rafters on a slope away from my doorways, using pvc hangers.

Did you get a fence? You can buy them of course or John McGrath made one using his parf guide

you are better off to do your electrolysis in a separate container and just pipe the oxygen across to your growing container.

Hi, This is just what I've been looking for. Thanks for sharing. What is that you used to squeeze and hold the pvc pieces while you made the two cut? I need one of those in my life. 🤣 Where can I find one? Thank you and stay blessed.

😅 promo sm.

How does water come out the jar if the jar is sealed and only air is pumped into the jar??

Did it still extract after all that?

Dawson Precision makes a tool to remove tight extractors, which is what I had on my Nighthawk Shadowhawk in 9mm. I was NOT going to drill on my $5000 gun. And it was tight. If you mar the hook then it’s not going to extract shells. And my Nighthawk was filed by hand to work perfectly. The Dawson tool work’s perfectly: #098-002

It's the trigger guard alls you do is sand or grind around it make it look like a normal glock trigger guard then all good but now they sell alot of p80 holsters

woow ang ganda

I never understood how guerilla farers in africa got there water fro so far, now I know! thank you good sir

Exactly what I was looking for. And according to the comments below, everyone else :) Thank you.

I was looking for exactly this kind of set up also. You did a nice job. Thanks for taking the time and effort to make and post this video.

Looks like pythium root rot. Brown slimey roots. Its an easy fix. I like slf-100 it has worked great in the past. Its even better for preventing the problem.

Why did u remove material and Jeopardize the holsters integrity?? It's just boltaron thermoplastic all u had to do was heat it put the firearm in it and use compression.. If u wanted to be real precise you could have taped off every area u didn't want to alter with a couple levels of tape and just heated the specific area you wanted to reshape. It takes a Lil more heat than kydex and holstex to shape but tbh in this case that's a good thing.

Talking all about safety and he's barefoot while doing this post

Excellent idea. Video is way too long. We don't want to watch you cut every piece, either show just a few cuts or fast forward. It's hard to be patient and watch the whole thing.

I just ran into the same problem . I ended up taking a punch and profiling it to fit the bussiness end of the extractor exactly so the two parts sloted together to make one long straight rod and i was able to give it two or 3 good taps from the front and it poped out no damage . I have done alot of work on several ria's and this is the 1st time i ran i to this problem ... very annoying

How many rounds through the gun did you have before removing the extractor! What do you think caused it to get stuck?

so the water gets into the gar because it is not a tight lid how does the water get in the jar

Other than possible metal toxicity from what metals you use you're removing the hydrogen from the water which turns the water more acidic the longer you run the electrolysis in the reservoir.

Thank you, You said 3/ pvc for the Clips on 1/2 inch pvc, correct, while i heard others say the same for the same. Appreciate the video showing exactly how to do it, this will finish off my top greenhouse for foul weather.

I ended up modifying the frame to fit “most” holsters. Recontoured the dust cover sans Nubs to subtly match Glock Profile then flattened the rounded edge under the front of the trigger guard to right about where the front grip/ribbed area hooks down and under (kept the ledge). I similarly removed material from the inside edge of the holster where it met the trigger guard on any holsters where this caused an issue (just the ones that closed under the trigger). But, for holster integrity, firearm protection, aesthetic, comfort, and laziness reasons I kept the closed holsters closed by taking off as little as possible inside with the Dremel. But, the more holes, the more dust, the more I have to clean the inside or risk something getting in there and scratching or worse. But, then again, I’ll open up a closed-end holster to stick a comp through it. I think the risk of modifying the integrity of the frame by shaving the dust cover was outweighed by my desire that everything just work well and play nice together.

Thanks good video, the clips are expensive.

I'm glad I found this video I'm going to make my own clips now ! Amazon clips cost 12.59 $ for 5 and of course I need 6

what size pipe to make clips for clips to clip onto 3/4 " pvc pip sections?

How electrolisys and airstone afecta Ph?

If you can see your crimp on a rifle cartridge, it’s too much.

What about protection for your toes? If you dropped that grinder or vice on them you'd wish you had worn boots lol

It couldn't stop the algae because the bottle is suppose to be covered up, completely black, the roots are suppose to be in complete darkness

Call Werkz 👍

What size pipe to make clips for 1in pipe?

Wow brah. Came out beautiful. I know this video is old but have you made any new stocks? Any stock made from Koa? Aloha

Good Job Braddah!!! About to build my first stock. Bought a slab of Black Walnut. Will give that a go.

I was at Ali Al Salem in 2004. Worst food I've ever had while deployed.

im having the same issue with the lower part of the trigger guard on a g26, cutting out the bottom does the holster still have retention? its not gonna fall out on you if you bend over or something?

thanks, i needed some extra for greenhouse, and 1" sch 40 pvc. I think this may work on the sch40, not sure though. going to try.