David Ahn Cycle

Пікірлер

@santakloz8321 7 күн бұрын

did you have to purchase the axle adapter separately? thank you

@davidahn_cycle 5 күн бұрын

The axel adapters came included.

@mashmallowsnowy3328 13 күн бұрын

Is this Slx better than previous build ? The one with DT wheels & G one tires😮Cuz i thought that one looks better

@zeroxdogma 20 күн бұрын

Hi, nice video. Do you know if the iphone pro max (or a big cellphone) can fit in the pocket? Want buy one of those hydropack. Hope you help me thanks

@davidahn_cycle 17 күн бұрын

Hi, the pocket is 140 wide and 190mm deep. I think it should fit.

@zeroxdogma 17 күн бұрын

@ Thanks for answer me. I really apreciate it 🙏

@DPF123456 22 күн бұрын

Hows the bike riding a few months in?

@davidahn_cycle 17 күн бұрын

It's going great! I'm looking at changing the seat though, just about to order the clamps for oval rails.

@mvp_kryptonite 22 күн бұрын

Neat, about to set up mine

@zgr5421 Ай бұрын

How wide is the storage opening in this frame?

@davidahn_cycle Ай бұрын

@@zgr5421 it’s 35mm wide.

@rinaldolookene 2 ай бұрын

Nice smooth video! Good stuff

@FLOWIMPORTS 2 ай бұрын

You should add some commentary

@coynebr1 2 ай бұрын

Do NOT try to put the legs on like this fool does. What a mess.

@senyaw53 2 ай бұрын

Thanks for the recap. I was a green dot (3 plus hours) it is good to see a wider view than staying on my bike and trying not to die. The camera didn't quite show how steep that hill up to the winery really was. I've watched all four videos, good editing to get a feel of the race.

@davidahn_cycle 2 ай бұрын

@@senyaw53 yeah they really made us work for that finisher medal on the last hillclimb to the finish, it was brutal 😅

@jaselikesbikes 2 ай бұрын

Good job David, it looked fun!

@fernfloyd 2 ай бұрын

You're supposed to set the bead on the second wheel at 19:36 before pouring sealant in the wheel. Rookie mistake. Another mistake at 21:35 is clamping the bike stand on the top tube. It's always recommended to clamp the seatpost and not the frame. Lastly, the bike shipped with two metal washers attached to the non-drive side crank arm. It's highly recommended you put one on each pedal axle before threading them in.

@jromtb 2 ай бұрын

Nice ride on this Exceed! Cheers from Poland ;)

@BrunoBouery 2 ай бұрын

Thanks for uploading all of the 4 stages, it brings back fresh memories. I was a blue dot too so we crossed paths a few times. In fact, I am the guy climbing in front of you with the green backpack around the 18 minutes mark…

@davidahn_cycle 2 ай бұрын

@@BrunoBouery My 1st cape to cape, really enjoyed it and was great to see other hardtail riders too 😄

@senyaw53 2 ай бұрын

Blue dot 🔵 Solid ride. 👍

@Chunky246 2 ай бұрын

Looked like a cool event. Good job.

@davidahn_cycle 2 ай бұрын

Thank you!

@nadjeem 2 ай бұрын

this is literally my dream bike

@gbrdh 3 ай бұрын

Good little explanation in the description. Thinking of throwing myself in the deep end next year.

@m3star18 3 ай бұрын

Could you please describe what you did with the saddle?

@davidahn_cycle 3 ай бұрын

The pivot mechanism for the saddle was jammed tight so can't adjust the saddle angle (common issue I believe). So you have to disassemble the whole thing and tap out the pivot bearing from the seat post to loosen it. I just used a pin punch and a hammer to tap them out.

@alexanderwinklehner5077 8 күн бұрын

@@davidahn_cycle I had the same issue on my Grail CF SL 8 and fixed it the same way. Initially I thought it's not possible to adjust the saddle angle, lol.

@windriderkoo3142 3 ай бұрын

You need to install a comprssion plug into a carbon steerer tube. it's getting weaker over years. Design fault of canyon bikes.

@davidahn_cycle 3 ай бұрын

Ok thanks for the information, I'll keep an eye on it.

@txlangster6276 3 ай бұрын

Purchased a Zwift Ride, Bike Frame arrived damaged, poorly designed packaging, and Zwift is not responding to any contacts I've made. Going to "Zwift Forum", I find receiving a damaged Zwift bike is not unusual and Zwift knows of the poorly designed packaging. As one other reviewer wrote, I paraphrase, "Looks like package was handled by WWE."

@JCleggy 3 ай бұрын

Thanks for the video! I got the same bike, color and all. I plan on switching to tubeless very soon. Did you replace the tape in the wheels or use whatever was installed at the factory?

@davidahn_cycle 3 ай бұрын

The rims already come with a good tape job. So just remove the tube and add valve & sealant.

@JCleggy 3 ай бұрын

@@davidahn_cycle thank you!

@blissbouwerij4033 3 ай бұрын

Hey I am over in Holland, great to watch some footage from back home in WA cheers mate!

@chrisatkins9343 3 ай бұрын

Welldone David, great day on the bike 👍🏻

@SilviaromeroAlemann 3 ай бұрын

You're doing a fantastic job! I need some advice: I have a SafePal wallet with USDT, and I have the seed phrase. (air carpet target dish off jeans toilet sweet piano spoil fruit essay). What's the best way to send them to Binance?

@СергейЦепенок 3 ай бұрын

Видос ну ооочень занудный, можно было бы сократить раз вшесть😢😢😢

@ShayneBoyer 3 ай бұрын

The spacers are key here. NOT shown in the instructions from ZWIFT. Thanks for taking a pause there,

@lacunoc 2 ай бұрын

By spacers you mean the two for the through axle on the kickr core?

@ShayneBoyer 2 ай бұрын

@@lacunoc yes! The through axle will still thread and bike sits fine; however clicks or rocks left and right a bit.

@lacunoc 2 ай бұрын

@@ShayneBoyer and by instructions from Zwift you mean their assembly clip? Because I’m pretty sure the Kickr core manual and also the description on the spacers are actually telling you, what to put where. Sorry, I’m asking because mine is about to arrive ;-)

@davidrowe8747 2 ай бұрын

@@lacunoc you are correct - but there is also a Zwift video where they show you exactly which spacers to use. Look for the video titled, "Setting up Wahoo KICKR CORE Zwift One for Zwift Ride", and FF to 2:35 in the video. Must admit the pictures in the paper instructions aren't especially clear - particularly if you already have a load of spacers from already having a Kickr Core. Also, the video shows the person inserting the spacers "end on", so you have to watch it a few times to be certain which goes on the drive side and which goes on the non-drive side.

@Earclops Ай бұрын

@@davidrowe8747thank you!

@ivan3584 3 ай бұрын

Nice, but i really dont understand why is not possible change the frame size... that's really really bad imo

@1982Cranston 3 ай бұрын

Great video! Can you do one on your first weeks use? Likes and dislikes etc please. Thinking of getting one

@adamkubiak1933 3 ай бұрын

Lovely clip. Some serious bike mechanic skills topped with a skill of remaining lab-like clean. Good Job!!!! Thank you!

@williammorris4419 3 ай бұрын

beautiful bike.. What size is that frame?

@mariomar2180 3 ай бұрын

According to the sticker on the frame it's "S"

@davidahn_cycle 3 ай бұрын

Thank you, it's size S

@pcmjpcmj6854 3 ай бұрын

Thank You. Very helpful. My Grail CF SLX 8 AXS arrived today!!

@davidahn_cycle 3 ай бұрын

Thanks, that's awesome enjoy your new Grail 😄

@manuelmartinezlopez7338 4 ай бұрын

Bonita máquina y buen video

@davidahn_cycle 3 ай бұрын

Thank you!

@dalegregg8824 4 ай бұрын

Great vid! That bike is 2nd on my list but I am waiting for the new Grizl since I like to do some bikepacking. You have a nice shop also. I learned a few things from the video so thanks for sharing.

@davidahn_cycle 4 ай бұрын

Thanks! Enjoy your new Grizl 😄

@graemestickland7975 4 ай бұрын

That's 41"and 14sec I won't get back 😂 perhaps AI could do your intro and give you a music track. Bobby could give you some suggestions and I wonder what it looks like speeded up.

@davidahn_cycle 4 ай бұрын

😂🤣

@chrisatkins9343 5 ай бұрын

Pity about the start 😂 I was with ya lol

@woofenzo 7 ай бұрын

Great video. Enjoyed the different perspective as I rode a gravel bike on the day 👏

@marksmith9667 7 ай бұрын

Well done

@PapaHet1981 7 ай бұрын

Sensational work

Ең жақсы KZbin

Пікірлер