Thanks for your video. I've seen other videos and some said don't get optical flow. Why wouldn't that be good to have? I would think it would help but so far I don't have a helicopter 🚁
@Flight66774 сағат бұрын
It used to be a problem with stability while in hover with twitching and etc. on the earlier RC ERA models. The newer versions such as the C138, C123 and C190 seem to have improved OF response - so they may have made needed design changes. I don't see any reason why you should not get it with OF now. unless you don't want to spend the money.
@Powershotknecht6 сағат бұрын
cool
@chrisrc84510 сағат бұрын
Where did you get the polizei heli
@Flight66774 сағат бұрын
www.rc-era.shop/
@egertkabilattekivi249610 сағат бұрын
Just Beautiful and so stable in air.
@did3d52313 сағат бұрын
where find the polizei one
@norbipuhl11114 сағат бұрын
Does the Landing gear from the Z1 fits the Rc Era? It looks more scale
@winstonsmith780116 сағат бұрын
I have the Blue one and I repainted it to look like the NYPD helicopter . It took a long time and effort to paint and place the decals but it looks really Good.
@Aleksandr_spb.16 сағат бұрын
Друг подскажи есть разница с датчиком оптического потока и без датчика если на улице летать?
@Flight66774 сағат бұрын
No I did not see much of a difference.
@egertkabilattekivi249620 сағат бұрын
Nice collection helis.👍👍👍I like more rc era c138 bell 206.Just beautiful scale heli.
@vincentcimino196323 сағат бұрын
Nice recovery on that Z1!! I like that one
@Flight667722 сағат бұрын
@@vincentcimino1963 I was surprised for sure!!
@Flight667722 сағат бұрын
@@vincentcimino1963 I am starting to like these more than the C123. There is a certain grace in the Bell 206!
@vincentcimino196322 сағат бұрын
@@Flight6677I’m starting to see a new YuXiang EC-135 C187S 100 Size with the Polizei markings coming up for sale, it looks good
@Flight667722 сағат бұрын
@@vincentcimino1963 YuXiang and RC ERA and sister companies. Their owners are first cousins LOL. Where did you see this EC135? I have the F06 version.
@vincentcimino196322 сағат бұрын
@@Flight6677lol that’s funny about the relations, I saw it on HeliDirect site
@nicholasmagcamit823323 сағат бұрын
My favorite helicopter !
@Flight667722 сағат бұрын
Thanks - Bell 206 is a classic!
@RCCopterLoveКүн бұрын
Very nice review and comparison of the different models!! Will you do a flight comparison?
@Flight6677Күн бұрын
@@RCCopterLove Thank you. I can certainly do that soon if of interest. I have been really busy with my day job lately LOL
@RCCopterLoveКүн бұрын
@@Flight6677 Thanks a lot!!
@markstockie4140Күн бұрын
I think I will get one. Thanks for showing how nice it can fly.
@Flight6677Күн бұрын
@@markstockie4140 you are welcome
@danialtun5431Күн бұрын
Behind motor spare part have or not dont know daily fly this small motor damage fast
@Flight6677Күн бұрын
@@danialtun5431 brushless motors are very resilient and last a long time, probably longer than the helicopter so I don’t think it’s a concern. Plus, spare parts are available and cheap.
@DanoSlingz2 күн бұрын
I've never had a chopper so I ordered this exact one about a week and a half ago. Got the extra battery optical flow and the transmitter upgrade. Can't wait for it to get here! Thanks for your video! 😎✌️
@Flight66772 күн бұрын
@@DanoSlingz you are welcome.
@Flyeasy4412 күн бұрын
Very nice heli. Scale is the best looking stuff as well.
@nageshsawant58303 күн бұрын
How to buy in Mumbai INDIA
@Flight66773 күн бұрын
@@nageshsawant5830 alibaba
@JonxyRL3 күн бұрын
Wow looks beautiful! What polish did you use?
@Flight66773 күн бұрын
@@JonxyRL Thank you! I use epoxy coat diluted with alcohol.
@JonxyRL2 күн бұрын
@@Flight6677Thank You
@JonxyRL2 күн бұрын
@@Flight6677is it easy to fly ?
@Flight66772 күн бұрын
@@JonxyRL as RC planes go yes, but you need to have the basic orientation and landing ability.
@JonxyRL2 күн бұрын
@@Flight6677 ok i think i have it
@Lion_fc3 күн бұрын
WHAT A FUN!!
@skywalkerEA5 күн бұрын
Hi! Does it feel the same as the 189? Which one is more pleasant to fly?
@Flight66774 күн бұрын
@@skywalkerEA they are somewhat different. I love the fenestron tail of the C190. I also love the scale presence of the C189. Both have the same blade motor, gear and head assembly. I really like both so can’t make a decision on which for you unless you let me know what is more important to you. Speed, agility or stability at slow speeds and etc. scale presence is very critical and accurate on both.
@frankl84406 күн бұрын
Hi, seems like this might have less problems compared to C189 which has gear ? Does this flies better than C189 ? Thx
@Flight66776 күн бұрын
@@frankl8440 yes it flies better and has more control.
@adrijoroy63647 күн бұрын
Bro I am physically handicapped I don't work please give me this helicopter free 🥺
@adrijoroy63647 күн бұрын
How much this helicopter in Indian rupees
@Flight66777 күн бұрын
@@adrijoroy6364 I bought this for $95 but now you can buy these for less ($82 I believe on Aliexpress). But if you like the Bell 206 I would recommend getting the RC ERA C138 Bell 206. It costs less and performs better.
@hustenbon699 күн бұрын
So much thank you for sharing it,there is no Dokumentation about it. Secret is no longer a Secret 🤓🤭👌👌🍻
@Flight66779 күн бұрын
@@hustenbon69 you are welcome.
@tarin85689 күн бұрын
Get mine week ago, crash 1 time, after that when I hovering it's keep circle swing. Anyone has the same problem?
@Flight66779 күн бұрын
@@tarin8568 check the links to make sure they are not damaged. Next check the main shaft to make sure it’s not bent. Then check to make sure your blade grips are not on too tight. Finally, calibrate the gyro and then go into parameters menu and level your awash plate when in hover.
@tarin85689 күн бұрын
@@Flight6677 thank you sooo much!!
@Flight66779 күн бұрын
@@tarin8568 you are welcome.
@JBSATE9 күн бұрын
😮gual tamanho do helicóptero ele suporta vento ou e fraco ?
@peterinaia14 күн бұрын
Tenho o c189, e ele nao obedece pra frente, pra traz vai uma beleza, sera wue estes ajustes corrigeriam esse problema? Estou corrigindo um pouco sumentando o peso na frente em 10 gramas, mas nao melhora quase nada.
@Flight667714 күн бұрын
Yes, recalibrating the gyro and doing the swash plate adjustment and steady hover will correct the problem.
@Fotogrphr14 күн бұрын
Nice!
@goldenmanuever117615 күн бұрын
do you know of anyway to shut the 6g nonsense off? I think it may be built into the flight controller.
@Flight667714 күн бұрын
@@goldenmanuever1176 not all the way off. If yours has a optical flow sensor you can turn it off but otherwise you are stuck with the default gyro. This is a scale and beginner friendly heli. Not sure why you want the 6G or gyro off.
@goldenmanuever117614 күн бұрын
@@Flight6677 OK thanks that’s what I thought. I do have the blue one without optical flow. I understand this is for beginners and I don’t want the Gyro turned off. I want the self leveling feature turned off been flying for over 21 years so I don’t need any of that, I wasn’t sure if there was something on the flight board that could be unplugged
@JohnVHRC15 күн бұрын
Man, that thing is tough!
@whiskeyjet101717 күн бұрын
Just curious, what male is the yellow jet ranger in your video?
@Flight667717 күн бұрын
@@whiskeyjet1017 it’s a “Z1”. My view based on the build and its materials and type of setup is that it’s a YuXiang model but they deny that it’s theirs. So I don’t know who is it really made by other than its a Z1.
@whiskeyjet101716 күн бұрын
@@Flight6677 thanks for replying
@Fotogrphr17 күн бұрын
One of the best videos EVER!!
@Flight667717 күн бұрын
@@Fotogrphr thank you. I have seen your photography and you sir are amazing!
@did3d52319 күн бұрын
my ERA C138 problem despite having set the gyro on a flat surface, the helicopter goes forwards and to the right, even when the trimmers are fully adjusted in the other direction...
@Flight667719 күн бұрын
First, place heli on a flat surface. Then turn on the transmitter and then the heli. Bind. Then pull both sticks to the lower left. Hold it there for 2seconds. The heli led will blink and the gyro is calibrated. Next hold the throttle trim down for 2seconds until the TX led blinks. Now you are in the parameters menu. Take off and hover the helicopter. Adjust the trims for aileron and elevator as required to get a steady and balanced hover. You are basically adjusting the servos positions within the gyro for a level swash plate. Once happy, while still hovering, push down the throttle trim again and the led light on the TX goes solid. Land and switch all off. You can restart and check and repeat if needed.
@did3d52318 күн бұрын
@@Flight6677 I've already done this but it goes forward to the right very quickly and I have to trim almost all the way back to stabilize it even after I've adjusted the gyro.
@Flight667717 күн бұрын
@@did3d523 do it again. This sometimes takes a few tries as you slowly adjust the swash for level hover.
@did3d52317 күн бұрын
@@Flight6677 trim change during the fly... how to accelerate the mototr speed?
@Flight667717 күн бұрын
@@did3d523 why do you want to do that? In parameter mode you can also increase or decrease pitch angle. I do t think you can increase speed of rotor.
@did3d52319 күн бұрын
dont work on my c138 keep go front no trim possible
@did3d52319 күн бұрын
mine go front no trim possible and gyro setting on flat plane change nothing
@guillermogarcia948319 күн бұрын
Todo muy bonito donde lo puedo conseguir y cual es el precio por favor una respuesta adi podre cómprale uno a mi nieto
I thought I was the only one that still flies walkera helis, i have a ufly 3 axis gyro version and I love it.
@Flight667719 күн бұрын
I still have a few nice ones
@Raptor50aus22 күн бұрын
So if this heli flew for about 10 min then only fly for about 7 min max
@Raptor50aus22 күн бұрын
Please for all novice heli pilots DO NOT rely on a beeper by then its too late. Use a timer to fly any RC heli. Your batteries will like you too :)
@Flight667722 күн бұрын
@@Raptor50aus on these helicopters the beeper has been ok. There is no other way you know the state of the battery other than making your own connectors to fit on the battery terminals and attaching it to a battery meter to read the volts per cell. It’s been ok to rely on the model setting as it’s the first line of defense. The second is the heli will slowly land. One more thing is that these heli from RC ERA use lithium ion batteries and not lithium polymer. Lithium ion batteries are less finicky and sensitive.
@rodgersrcaviation278522 күн бұрын
The disappointment is real bad
@Mikeylikesit196823 күн бұрын
Increase the head speed
@Flight667722 күн бұрын
@@Mikeylikesit1968 I am not sure that’s possible - I know you can change the pitch but think the head speed is already programmed in the flight controller. Need to check. Does anyone here know if it’s possible?
@Mikeylikesit196822 күн бұрын
@Flight6677 yes, you can , I watched a KZbin video on how to do it
@@Mikeylikesit1968 OK. Thanks. Perhaps someone here can help verify.
@mickmuzzmkmz16284 күн бұрын
I watched a video where someone was using their own Tx (RadioMaster t16s), which made it fly with a faster head speed, which livened it up a bit, at the cost of battery life. I'm yet to see one where it's possible on the stock Tx, but that's not saying it can't be done.
@helicopterovirtual-msfs625423 күн бұрын
Fantástico.
@Thailand-Low-level-11123 күн бұрын
😅😅😅😅❤
@cranklabexplosion-labcentr824524 күн бұрын
I remember having three GWS receivers, and put them in three Slow Sticks all with the same crystal (before 2.4) as the remote, and was happy that they all flew for one second.
@qfrb9724 күн бұрын
Very odd, the lower swashplate is "inverted" so that the balls are actually below the plane of the plate. Normally the balls would be inline with the balls of the upper swashplate. I guess they needed to do that for clearance reasons.
@AstouCiss-kp6yc24 күн бұрын
Salut ça coûte combien je voulais 👂🤝
@Mikeylikesit196825 күн бұрын
Thats not what the down trim does. All it does is turn off optical flow. When you said you trimmed it and turned it off and back on , you were flying back in optical flow.
@Flight667724 күн бұрын
That is not exactly correct. When you push down on the left throttle trim and hold after a few seconds the TX LED blinks and it goes into the parameters menu. In this menu you can level the swash plate by adjusting the roll and pitch trim for a steady hover. The optical flow also switches off so that it does not impact the swash leveling. In this menu you can also adjust your pitch angles using the rudder trim.
@Mikeylikesit196824 күн бұрын
@@Flight6677 😆 🤣 😂
@UlisesBatalla25 күн бұрын
Hello, you seem the most knowledgeable in all of these RC era helicopters. I am having an issue with one of the MD 500 helicopters. I have two of them. The styles shouldn’t have mattered, but I even went as far as changing the red Coast Guard model out for a sand Camel Fage model and back vice versa, the issue that I’m having is this once in a while when I’m flying one of the MD 500 helicopters, the five blades will fold up on each other. The rotorhead stop spinning and it falls out of the sky by folds up as the five blades fold back on themselves and the rotorhead stops spinning , and obviously the helicopter will fall out of the sky. I have gotten lucky twice. I was only a few feet off the ground and landed in some of Florida’s nicest thickest grass and there was no incident one of the other times that I was flying ahead and landed on the concrete. Needless to say, the landing gear buckled under the load, and the company no longer just sells landing gear through the bank website. They now sell the entire fuselage kit, and that was painful to say the least to have to buy all of those parts just to get one set of landing gear happens with red rotor blades with yellow rotor blades on one of my models Z fold up on themselves and the helicopter falls out of the sky. If you don’t understand what fold up means take with your finger and push all of the blades back till they will no longer go backwards anymore on the rotor grips and that is what I mean but that occurs underload underlying conditions. It’s as if the rotor continues to move counterclockwise and all of the rotor blades stop spinning and fold onto themselves. Can you please help?
@Flight667725 күн бұрын
I would be happy to help. Can you post a video of the problem? I mean I read and get what you say, but its hard to diagnose it as its very strange. A video may her. What I can assume is that the pitch is not set correctly or something much simpler, the blade grip screws are on too loose. A video will help. Thanks.
@jeffkraus145725 күн бұрын
2 things...yellow tips on top of rotors and you really should put a tiny bit of glue to the tips of the antennas, if not you will lose them in the grass and NEVER find them.
@Flight667725 күн бұрын
Thanks. A little glue will not hurt but only put it on one side of the antenna, otherwise when you have to open them again it will be messy. What about yellow tips on top of rotors?
@jeffkraus145723 күн бұрын
@@Flight6677 If the yellow tips are facing up the blades are mounted correctly.
@Flight667722 күн бұрын
@@jeffkraus1457 yes that’s true. But it’s good to also understand the technical details about the leading edge of the blades.