BremTech

Пікірлер

@OmnipotentSag 3 күн бұрын

I have a metal front version 412MS and it makes a horrible noise when I turn on the amp. I understand that it is the front entry way instead of the back, but I'm not sure what I'm doing...hoping it's just some wiring is loose. 🙏🙏🙏🤘🏻🔥🤘🏻

@carlomercuri 16 күн бұрын

Ottimo! Ma mi chiedevo, dove hai collegato il quarto tom? La Nux DM 219 ne ha tre, mi pare?

@arneolson7114 Ай бұрын

Is this old cabinetban 8 ohm cabinet paralleling to another cab makes it 4 ohm ?? My amp doesn't support 16 ohm so I would need two cabs if they are 16 ohm cabinets . I like this cab as it opens from behind and the stereo versions don't

@johnford7847 2 ай бұрын

Nice build, well thought-out. Thanks for sharing and especially thanks for including the critical dimensions.

@sanderheijselaar5687 3 ай бұрын

Tried it and it indeed fixed the infill visible through the walls 👍

@OsirisNeits 4 ай бұрын

Running the mower until it's warm before changing the oil will thin it out and make it flow better. Thanks for the filter number. I didn't have the manual and Google seems to get worse by the day lately.

@TimChambers-s5y 5 ай бұрын

Well mine is able to be seen on the walls and I checked my settings and it is not checked already so I'm not sure what the problem is

@alexlapiz 6 ай бұрын

this is what always expected from internet. Awesome, educational, inspirational and entertaining videos!!!!

@cordobafranco5873 7 ай бұрын

This help me a lot , thx man

@grantkilgour 7 ай бұрын

FYI, piezos cost next to nothing (about 10 for £5 in Britain from eBay/Amazon). It's super common for them to fail and it's a 50p/50c repair.

@Epiwater11 7 ай бұрын

Man! Thanks for the hilarious bla bla. Take my stressful heart away

@Ghghlkjlkj 8 ай бұрын

Thank you

@uygar2580 8 ай бұрын

I realised this lines while printing calibration speed tower, noticed some models printed before was same issue at some walls. Now time to investigate other issues. Retraction distance was previous.

@thatguyerk5426 8 ай бұрын

Do you still have this amp? I just got one and im trying to fix it but its missing some electrical when i cracked it open

@sergiorodriguezcabezas2486 8 ай бұрын

Thanks man, you really helped

@peterallen2848 8 ай бұрын

Thanks I have same mower

@Mike-2422 9 ай бұрын

I built two units with 14 slots 37 1/2" high without castors two days ago. I used 1/4 sanded plywood for the runners. They were a full 1/4 thick. I used 16 5/8 internal width . I found 16 9/16 too tight. The work and look great. I didn't paint mine yet I may just use poly urethane.

@Mike-2422 10 ай бұрын

When mounting castors I Use a vix bit to locate the holes! I use #12 x 3/4 screws with a 1/4" washer under the head to compensate for the large screw hole in the castor plate. Works just fine. Great video I will try your mounting system.

@HeyLookItsTitan 10 ай бұрын

Awesome video! Love the humor, the lawn ending killed me lol😂

@davidbutton3500 10 ай бұрын

Anyone know where to get these parts boxers in Canada?

@unspecified2472 10 ай бұрын

Fantastic work! Thanks!

@markwhitaker3162 10 ай бұрын

What size piezo sensor did you get for your Tom

@317-Woodworker 11 ай бұрын

I have a Craftsman 44811 and your video helped me save one of the last Made in the USA Craftsman tools. I was baffled till I saw you use a pen clip to compress the bearing and spring. I didnt have that so i used a thin folded piece of paper. It provided just enough pressure to keep the ball in place and then slipped right out after the pawl was in place. Thank you very much!

@Couchsurvivalist 11 ай бұрын

nice video! What sticks are you using??

@TacComControl 11 ай бұрын

I kinda want one. I don't have a woodshop, so I can't build one, but it would be cool to have one of these. Also suggestion: Put the slides on pegs. That way you can remove a slide to make it compatible for the double-height 8 bin cases.

@TacComControl 11 ай бұрын

(Although to be honest, you can probably leave them in place and it would probably still fit fine)

@evandwb2122 Жыл бұрын

I use creality and this setting is turned off already and I still get these lines what do I do?

@xchemie 9 ай бұрын

I'm having the same issue! This video just made me more frustrated lol!

@thomasbruns4064 Жыл бұрын

Helped me a lot!

@Bizzaro500 Жыл бұрын

For everyone watching, grease will stick the ball bearing to the spring. Use grease not oil.

@Tensquaremetreworkshop Жыл бұрын

Lids. Why have the trays got lids? It just adds three steps to access (two catches and lift lid) and the same to put away. What do they add?

@joewalsh8423 9 ай бұрын

Allows it to be carried to the worksite w/o dumping them or mixing them up perhaps.

@Tensquaremetreworkshop 9 ай бұрын

@@joewalsh8423 What worksite? This is workshop storage.

@markchapel 7 ай бұрын

@@Tensquaremetreworkshop These are meant for mobile small parts storage that can live in a garage or be taken to where the parts they hold are needed, which might be 20 feet or 20 miles away. By way of giving you some perspective on this, I've talked with many folks about these exact bins for years and you are the only person to ever complain that they have lids. No one else I know of would buy them if they DIDN'T have lids.

@Tensquaremetreworkshop 7 ай бұрын

@@markchapel If they are meant to be 'mobile' why store them on horizontal shelves? Tools and parts are either used in a workshop (def: a place where work is done) or transported to a remote jobsite. Storage should reflect which. Consider the difference between the toolbox (mobile but often hard to access contents) and the wall tool chest (convenient operating height, and easy access, but too heavy/awkward to transport). The same with parts- storage for transport (toolboxes with drawers?) is different from workshop access (bins, shallow large drawers). If the items shown in this video were for remote use, the trays would need to be selected, collected, and put in some container to transport. They are inconvenient for both workshop use or for remote use. Double fail. My solution to this dilemma is to have a separate toolbox with tools for remote use, and a box of common fastenings to which I can add specific task tools and fastening if it will be unusual. When all the tools and parts in a workshop are fast access (no catches, lids, or other unnecessary obstructions), work proceeds much faster. Not commonly understood? No surprise, I made a good living from seeing the obvious that no-one else seemed to... Even, sometimes, when it was explained to them.

@Shajmen Жыл бұрын

Even 4 years after this came out, this video helped me, so thank you

@johnlemus7921 Жыл бұрын

I made a really ghetto-rigged version of something like this recently, and it came apart. Is there anyway I could buy one of these?

@stevenzych2105 Жыл бұрын

Maybe the easiest version of these HF bins racks I have seen! Great work and clear and concise video too.

@leepastrana Жыл бұрын

Brilliant video! Now I can do an oil change on my mower without stress. I did laugh when you said ( Install the filter with your eyes closed ). You know we all do this ;-) Cheers

@justintrett9663 Жыл бұрын

You helped me bud. Thanks.

@adamferree2756 Жыл бұрын

Very helpful and humorous video. For me, I had to strip wires for middle piezo and re tape it down

@tonedriverss8629 Жыл бұрын

Peavey gear has always been rock solid . The Bandit amp is legendary . Just listen to that killer tone ! The 80's - 90's USA Peavey gear / amps / cabs etc is now going up in value real fast . For good reason .

@jeffd9193 Жыл бұрын

Thanks for this video, as I’m having the same problem. I’ll try this trick when I get home later!

@plugger410 Жыл бұрын

Anyone know what setting to change if you were having this issue but on the top layer? Is that a temperature issue?

@camerontravis1442 Жыл бұрын

Helped me

@keithrayeski6417 Жыл бұрын

New subscriber…nice little project that makes good use of both leftover materials and, space. Can’t argue with that!! Enjoyed the build.

@mh76549 Жыл бұрын

THANK YOU SO MUCH! I just did my first bigger print and had this issue! this info saved me a lot of frustration! 🎉

@DeloreanGuy2 Жыл бұрын

I've been dealing with this lately on larger prints. Like you, i went and changed the percent of overlap to the outer wall with no change in the print. When I get home today from work I'm going to look for that setting you mentioned and see if that finally clears up my infill showing through my walls! This will greatly reduce sanding and priming/filling my prints to remove this annoying look! Thanks for the video!

@daspeed198 Жыл бұрын

any luck with it?

@smugzoid5156 Жыл бұрын

This was very entertaining!

@kenhorton9268 Жыл бұрын

Great video! THANKS!

@huntergalloway3944 Жыл бұрын

Lol I have the same cab and had the same surprise when trying to clean it.

@huntergalloway3944 Жыл бұрын

These cabs originally came with Celestion G12K85s. They’re great speakers!

@cemx86 Жыл бұрын

I built such a rolling cart but used thin aluminum angle stock for the shelf brackets. This doesn't rely on the small edge of the bins to support the weight - it supports about 1" of the bottom both left and right - much better for a loaded tray. Finally, steer away from the Harbor Freight stuff - they are a knock off of the Stanley bins which are much stronger. My $0.02.

@laserengraver8383 Жыл бұрын

Great idea. I will build one today. Now I can dump the coffee cans and jelly jars.

@hoots00 Жыл бұрын

Thanks for posting this video. You answered all the questions I had about this job.

@chriscalderin6677 Жыл бұрын

There was nothing wrong with those parts I would consider them brand new condition all you had to do was clean and install superlube! Most ratchets that get brought in for warranty are the same thing and there was enough ratchet kits to keep real technician's going for decades and now we are all out from stuff like this! I have had the same ratchet for 25 years used daily and it looks polished inside but works great ! I could have used your old parts for another 25 years!

@thezfunk Жыл бұрын

What happens when you have these lines and you already had that setting unchecked?

Ең жақсы KZbin

Пікірлер