14 күн бұрын
Пікірлер
@carlosholguin6739 3 күн бұрын
Clean set up!
@Coyotezr2 3 күн бұрын
i agree
@frick-n-frack4191 3 күн бұрын
New subscriber. Great content ZR2 brother. Traded my 2018 ZR2 (loved that truck) for the new 2024 ZR2 (love it even more). Fricken thing has everything.... 2 questions... What is the knob on the display screen? Mine does not have that. Q2, What is the AUX option within the display screen. I just haven't researched it. I was thinking it replaced the need for an accessory fuse box?
@Coyotezr2 3 күн бұрын
@@frick-n-frack4191 so the that knob is my volume knob? And the aux switch at the bottom is for if equipped a relay box that is good for one thing and one thing only. I don’t recommend bothering with it to be honest. If you plan on getting lights and stuff just get a auxbeam switch panel.
@Coyotezr2 3 күн бұрын
@@frick-n-frack4191 if you have a instagram you can dm me there. Link for my instagram is in my bio and at the bottom of most of my videos.
@Happybean33 4 күн бұрын
Goood work!
@kalijo1 4 күн бұрын
I just installed this on my ZR2 (auxbeam switch panel and exact same mount) on Friday. Its a great set up for the ZR2.
@Coyotezr2 4 күн бұрын
@@kalijo1 yes it is. Much better than using double sided tape
@PrivateUsername 5 күн бұрын
You don't seem to have a Patreon or anything.
@Coyotezr2 5 күн бұрын
@@PrivateUsername thought never crossed my mind to make one
@musclecarsdaily3020 6 күн бұрын
dude. my old 2014 silverado does that
@jimverw5863 7 күн бұрын
Did you do a front end alignment after doing the leveling kit??
@Coyotezr2 7 күн бұрын
@@jimverw5863 no I did not. I never took off the upper control arm completely. Truck drives great still. But I have a bigger lift coming soon so I’ll do it then. If your just doing the spacer and your done then I’d get an alignment
@jimverw5863 7 күн бұрын
Thanks for the reply.
@pvflyer67 9 күн бұрын
Looks great 🍺
@Coyotezr2 9 күн бұрын
@@pvflyer67 haven’t shared the news here but just got some amazing sponsors so expect even more upgrades coming.
@my-l-on1074 10 күн бұрын
Appreciate the video
@Coyotezr2 10 күн бұрын
@@my-l-on1074 of course. Just wanna put out informative videos.
@BoombaRacing 13 күн бұрын
Thanks for the great video review!
@cantdriveslo 15 күн бұрын
Like having a slow ricer
@Coyotezr2 14 күн бұрын
@@cantdriveslo Hector is going to be running 3 Honda Civics with spoon engines. And on top of that he just came into Harry's and he ordered 3 T66 turbos, with NOS, and a Motec system exhaust.
@barryhadar4486 16 күн бұрын
What the things does?
@Coyotezr2 16 күн бұрын
@@barryhadar4486 just gives off a psssh sound under load that’s it.
@cantdriveslo 17 күн бұрын
I wonder is they'll make switchback turn signal bulbs for the 2024 colorado zr2
@Coyotezr2 17 күн бұрын
that be pretty coo.
@Desertsandworm 18 күн бұрын
💪💪💪💪
@pvflyer67 21 күн бұрын
🍺 TNX 4 posting I bought one 4 my truck, and it looks great. Cheers
@Coyotezr2 21 күн бұрын
@@pvflyer67 glad to hear Botha
@AdventuresOfRogersAndHenderson 24 күн бұрын
Great video dude! That’s a tedious task! Clean install too! 26:20
@Coyotezr2 24 күн бұрын
thanks my guy. I was hoping to be done with running cables to the engine bay. But picked up a midland radio that i want full time power to as well and need to run that and a wire for the ghost antenna. lol
@AdventuresOfRogersAndHenderson 23 күн бұрын
@@Coyotezr2 lol the work is never done! honestly, I need to suck it up myself and install a in-dash comm unit too. But I’m not looking forward to it!
@Coyotezr2 23 күн бұрын
@@AdventuresOfRogersAndHenderson I got the midland mxt 275 at overland expo for a good deal. It’s easy enough to install. I have like 6 other mods still sitting at my house waiting to be installed. Hoping to do a few and make some videos this week.
@PlumbCarton5607 Ай бұрын
Those look excessively bright
@Coyotezr2 Ай бұрын
The camera makes it seem worst at night then they are.
@rubenceniceros9240 Ай бұрын
Nice 👍
@Coyotezr2 29 күн бұрын
Thanks.
@HowToWith24DY Ай бұрын
Great truck, im sure the stock lights are great also.
@floridayakadventures5844 Ай бұрын
I’d love to see a video on how to install the LED side markers for 2024 ZR2. I can’t figure out how to access them on the truck
@Coyotezr2 Ай бұрын
I have a set of those I will do a video on it once I have time to tinker with it
@floridayakadventures5844 Ай бұрын
Awesome! I look forward to watching!
@Vec135 Ай бұрын
They don’t make a led brake tail lights do they? I bought the Z71/ZR2 kit and was upset to not see those included
@Coyotezr2 Ай бұрын
I just shot them an email and asked. I’ll let you know.
@floridayakadventures5844 Ай бұрын
They make them. I put them on my 2024 ZR2.
@Coyotezr2 Ай бұрын
@@Vec135 lddy.no/1k0y1
@michaelglines8969 Ай бұрын
My 2024 Colorado ZR2 has the charging surface, came off the same way, no issues. I sprayed Invisible glass cleaner over the console after cleaning, helped with install. Thx!
@Coyotezr2 Ай бұрын
Right on. I may wire a wireless charger down there on my own possible.
@rachstockdale1992 Ай бұрын
Gave a follow . Nice to see another Wolff out there but I have a gmc canyon . Would this be the same for my truck ? Thank you !
@Coyotezr2 Ай бұрын
Yes it would be. They are basically the same trucks just look slightly different.
@Coyotezr2 Ай бұрын
And appreciate the follow. 🙏
@Downtimelost Ай бұрын
Been thinking about doing this one not sure if I wanna do victory or bullet points mount !
@Coyotezr2 Ай бұрын
I went with victory just for full time power. And that they include the usb with the mount. One stop shop. Just had to get a few things off Amazon. But I can charge my phone and cameras even when the truck is off so that’s a win in my book.
@Downtimelost Ай бұрын
@@Coyotezr2 yeah I like that idk why these Chevy don’t stay full power all the time, my shitty ford had full power all the time 😂
@Coyotezr2 Ай бұрын
@@Downtimelost my Tacoma didn’t do it either. They say it’s a safety thing. 🤷🏼♂️
@jimmycline4778 Ай бұрын
Will you sell your ZR2 wheels? I’ve been looking for some for my Colorado Trail Boss!
@Coyotezr2 Ай бұрын
Yes. I’m looking to sell them
@Coyotezr2 Ай бұрын
Send me a dm on instagram if you’re interested.
@Coyotezr2 Ай бұрын
My zr2 wheels are for sale.
@Happybean33 Ай бұрын
Great video! 😊
@JeffreyJohnston724 Ай бұрын
when will we see a video of your truck air born jump it lets see what it can do
@Coyotezr2 Ай бұрын
Mabey I’ll do that when I hit 1000 subs. lol
@jimmycline4778 Ай бұрын
Alot of people don’t know this, their are two places that hold your phone in these trucks, my I phone easily fits, it’s that slot between front cup holders, and theirs one in the back cup holders too, dealer showed that to me!
@jimmycline4778 Ай бұрын
I don’t remember where I saw it but theirs this coating you can spray on piano black and it never scratches and keeps the black shiny and new, but you have to apply it before you get those scratches
@jimmycline4778 Ай бұрын
If you ever buy after market wheels, I’ll buy your ZR2 wheels for my new Colorado Trail Boss!
@Coyotezr2 Ай бұрын
Where tou located
@Coyotezr2 Ай бұрын
hit me up on Instagram. I bought new wheels they will be here tomorrow. can find my instagram link in any of my videos
@Coyotezr2 Ай бұрын
Hey I got my aftermarket wheels on. You still interested in buying my stock wheels?
@kx8960 Ай бұрын
I have a 2024 Colorado ZR2, and if Chevy came out with a new cover that 100% matched the dash and I just had to install it, I'd buy it.
@KG_BM Ай бұрын
only thing that pisses me off, you cant add multiple displays and then cycle through them on the steering wheel... like come on man, THE MALIBU has had that scrolling display for years
@barryguffey8061 Ай бұрын
Ok looks good. Gonna get it.
@Coyotezr2 Ай бұрын
It’s a pita to install but just take your time with it. Lmk how it goes.
@Coyotezr2 Ай бұрын
If you do happen to mess it up. Reach out to the ocd plug they will send you another one I bet. Good people. Take a while to reply but good people
@KG_BM Ай бұрын
bless you man
@Coyotezr2 Ай бұрын
Bless you as well.
@bikeagain1310 Ай бұрын
A trick that helps the installation is to squirt a little windex on the plastic surface. The windex allows you to move the vinyl around without excessive sticking while you place it. Then, the windex evaporates from under the vinyl and doesn't impede the sticky from adhering properly. Just don't put too much on. Also, when you've got the vinyl in place where you want it, use something like a miniature squeegee to push any air bubbles out before it dries.
@Coyotezr2 Ай бұрын
That’s a good tip.
@barryguffey8061 Ай бұрын
Sounds like tinting.
@kx8960 Ай бұрын
I'e read to use 90% isopropyl alcohol, it won't leave a film like windex does.
@jamesfarmer6961 Ай бұрын
LOL, I bought that and it was a pain in the ass and had to throw it away!! Was fighting with creases left and right!! I couldn't live with it looking like shit!! I think they could do better!!
@Coyotezr2 Ай бұрын
If you contact them they will send ya out a new one more than likely free of charge. And the better way to do it would be use a full piece of vinyl and cut around the holes. But it wasn’t to bad. I got it in and think it looks pretty good.
@kx8960 Ай бұрын
Yup, I can;t even get the i-phone screen protectors on right. Chevy needs to make a replacement cover, I'd buy it.
@jimmycline4778 Ай бұрын
I bought the ZR2 bison decal that goes around the Chevrolet , I payed someone because that’s a hard decal to install but they ruined it cause GM gave me one for a Silverado it was slightly to big, the company did give my 180 back, if would have installed it I doubt GM would have refunded my money, I ended up buying the decals that go on top of the Chevrolet and easily installed them myself!
@kx8960 Ай бұрын
@@jimmycline4778 Huh, me, I'm going to strip all the "Colorado" and "ZR2" stickers and badging off for a clean/stealth/sleeper look. Makes washing and waxing it easier. I'll leave the one in the grill because it's discreet and I like it and it would be too much trouble to remove anyway. Those that know what a ZR2 is (by the DSSV shocks/frame mod - everything else you can fake) will know what it is and those who don't, won't.
@barryguffey8061 Ай бұрын
I was the first, I had to do it. Good vidio others need it.
@Coyotezr2 Ай бұрын
I saw your video pretty much why I did it.
@Max-kn9yi Ай бұрын
Why didn't you add new springs???
@Coyotezr2 Ай бұрын
I’m doing that soon. Once I get a front bumper I’ll be doing a coil over conversion.
@bamafan7 Ай бұрын
What torque specs you use on the affected bolts?
@Coyotezr2 Ай бұрын
Nice n tight. Didn’t torque anything down.
@Coyotezr2 Ай бұрын
If you find specs for it lmk.
@bamafan7 Ай бұрын
@@Coyotezr2 I see some people loosening bolts with an impact wrench, even the ones you used the two wrenches on. Any reason why using two wrenches is needed?
@Coyotezr2 Ай бұрын
@@bamafan7 because of instead of a cotter pins that 10 mm I’m using is needed ti loosen the nuts. Or else the nut will not come off. (Don’t know the name of the part) And you can use an impact. I chose not to. I like having more control of what I’m doing.
@bamafan7 Ай бұрын
@@Coyotezr2 Much appreciated!
@sphillips8362 Ай бұрын
Myn OCD is running 8000 RPM watching the soapy water drain into the control switchels under screen
@Coyotezr2 Ай бұрын
I want worried about it. And everything still works perfect.
@sphillips8362 Ай бұрын
Ok, won’t worry. Thanks for the heads up
@robertnaughton5417 Ай бұрын
I don’t see the link to screen protector
@Coyotezr2 Ай бұрын
theocdplug.com/collections/colorado?sca_ref=5919617.UidB2GxKrG
@krasnaludek298 Ай бұрын
Painted mine with bedliner spray from a rattle can. Did not take mine off to paint it … 4 months later & no flaking or chips yet.
@Coyotezr2 Ай бұрын
Lots of different stuff to use.
@klforrest573 Ай бұрын
I might run mine up around the gas filler tube. Thanks for the video.
@Coyotezr2 Ай бұрын
thats good info. let me know how that turns out
@tslim250 Ай бұрын
wow that's stupid they made those that short!
@Coyotezr2 Ай бұрын
From what I’m hearing from everyone is that the valve is designed to not let water through. But it was a cheap enough mod that took no time. Think the biggest flaw is how easy the stock one pops off from the diff. So at the very least I’d use a hose clamp on the stock one.
@tslim250 Ай бұрын
@@Coyotezr2 it probably works for flinging water but we all know it won't hold up under water lol
@jeffreymcnalljr1077 Ай бұрын
Definitely doing this once the factory film gets ruined. Also going to get their shift bezel wrap. Just not sure which one. Nice videos 👍🏻
@Coyotezr2 Ай бұрын
They sent me out there shift bezel I’ll have a video coming out for that as well. I went with the camo.
@chriscirku5444 Ай бұрын
I’m sorry but I like the before.The after looks phoney.
@Coyotezr2 Ай бұрын
To each their own.
@jracer815 Ай бұрын
Are you going to do the trans / front diff also ?
@Coyotezr2 Ай бұрын
Haven’t read anything about it being an issue. I’ve seen others do the rear. And thought why not. It’s cheap enough mod and doesn’t hurt anything by doing it. Plus with how easy the rear diff breather came off and how exposed it was if you didn’t want to run a new hose at least put a hose clamp around the stock one to secure it better.
@travisthompson2287 Ай бұрын
Front diff hose is longer and runs up higher.
@HowToWith24DY Ай бұрын
Man I like that truck!
@Coyotezr2 Ай бұрын
And I like your solar panels . 🙌🏼
@Island.Ventures Ай бұрын
Great video I'll probably do this soon! Got the link for the hose you ordered? Might have some laying around but I'll have to look.
@Coyotezr2 Ай бұрын
Thank you for the kind words. And just posted the link to the fuel line I used.
@billforrest9002 Ай бұрын
Awesome bro