Electrician here.! Nice Job.!!!!

Very helpful

Im curious to know machine settinge

Price today, used?

Dude, you talk and talk way too much about absolutely nothing get to the GD poi🤬

My first attempt at this failed on my Crossfile Pro table with Lesic Razor CUT45 torch. Torch of stop firing when it hit a hole. Switched to a Primeweld CUT60 with 'pilot arc' and everything worked fine.

Thanks, found out quickly what I needed to know.

Well done. I put the same unit in a 1967 Buick Electra 225. No tunnel clearance issues, either. I replaced the ST400 (Super Turbine 400) with a BOP pattern Hyrda-Matic (TH400).With the added length of the Gear Vendors unit, it allowed the switch to a one-piece 3.5 inch drive shaft from the whimpy 2-piece, 2.5 inch style. I also used Strange for the 4130 drive shaft and yoke--- and S60 rear end. Nice stuff!

I am hesitant to comment because this video is already 6 years old. But I am watching it, so in case someone else is using tips from it, I have some suggestions: first, since this is only a ceiling, how you screw it probably doesn't matter. But if this metal was placed on the roof, there is definitely a wrong and right way to overlap and screw. Contact your supplier or watch some credible youtube, or watch some instructional videos from learned people OR YOU WILL HAVE A LEAKY ROOF. It is that important.

Is it advisable to bolt the header to an actual head, to help hold it's shape??

Very nice! Here I am, 7 years later, watching you fix some Hooker Headers and I am about to attempt some minor repairs to mine. Thanks for your time!!

Excellent. Cheap dial indicator stands. Great idea.

What a dump man.

Tub of shit

Screw made in USA there's alot crap made in the USA lol never seen a more ridiculous reason for not recommending something... just tear down your whole garage there coz it's also not really made in the USA the metal you look at come from China for sure I mean behind you in the video 😅

Nice job sir, i tride to weld like this but can't get a solid weld after testing the weld, i get a very very small foming leakage, please what are your machine settings, i have a ac dc 250 tig welder

I have a pexto 137. But.. I just found one of these. Trying to figure out hownto sweet talk the old owner to get it. Nice explanation

Thank you very much it is extremely helpful. ❤

can you buy replacement hollow metal rod supports for under an armrest on these zro gravity chairs..chair in great shape but someone sat on it that was way to heavy and snapped both support rods under the armrest..not usuable this way..any suggestions?

Yes, a tool in my electrical tool bag that I keep using all the time. Also perfect for those long screws that hold together door locks. Lightweight, fast and saves the wrist.

I am having issues at the moment, I am going to go and try this now, I even put a whole new machine torch on yesterday. Thanks Dai

Get what u pay for. Go see Tim m. If you want some good shit...

How much would a shop normally charge to cut the AC line and weld it shut (disconnect the front from the back)?

Shame his dogs got arc eye

this guy is a moron, dont pay any atten to him

Not sure if you can help in any way, but the tilt locks under the armrest are not locking tight enough. Is it possible to increase the friction on these? TIA

The rod under my chair at the front is broken? Any ideas as how to fix it?

Thought homie was having a stroke whenever he’d hit one of those long uhh’s. 😂😂😂

Crappy Chinese made product.

I just saw that this is from 4 yrs ago

Could you possibly use magnets to pull the sheet down?

How do you set a bend angle stop for repetitive Bends?

What trim did you use where the ceiling meets the wall? Also what trim did you use for inside and outside corners on the walls? Very helpful video. About to order the steel for my shop interior.

What machine are you using

I grabbed this for my 1969 Rustang Fastback RustoMod > Helix 64-70 Mustang Bolt-In Deluxe 4-Link Kit w/ Coilover Shocks & Hardware 9190 > But prior to installing I was thinking that 9" Mustang Mach 1 axle housing with larger full size Ford drum brakes is very heavy. With a 72 Camaro front subframe with heavy connectors running back cradling a warmed over early seventies 455 Buck will this bolt in unit be safe and not fall out from under me when cruising the Florida Turnpike or Interstae Hi-ways? I will beef up bolting points with welded plates as needed once I get into installation.

Harbor freight has them.

I have had one of these in my toolbox for 20 years maybe and never knew what it was till today when my curiosity finally made me google the company name on the side. Lol. Great video. Very informative. Now that I know what its used for I'll keep it in mind. Thanks

Probably my most favorite tool, I too have a 20" and love it so much I just built my dad a 24".

hello sir.. .i know you dont make the sleeves anymore. . can i ask for some info. . i have 1 5/8 chrome moly roll cage that i need to extend .. what tubing do i use for the external sleeves.. thanks for any info .

Poor dog

I ve got one just like that in near perfect condition with the base and I was wondering what you think it might be worth

Thank you for the great video. I’m so glad that you explained things so well. Answered many of my questions in a concise video.

Can you send the link to the install video please - thanks

Probably not the correct way to operate, but with my new control unit I restricted the downward movement to nearly 0 while leaving the upward Z movement unrestricted to compensate for the elevation change across the table. Ends up a little high on the end of the low side, but not much different than the touch-off starting on the high side.

Music was bad

Got mine at lowes

whats name of this model????

Same thing happened to me. I used the same fix and everything is fine now. I have the Hypertherm45xp on a GoTorch expanded to 4x4. I used a piece of steel for a spell to make contact, then I decided to bend my tab too. Funny I ran into your video. We had the same mindset. Mine still works fine now for a few years. Thanks for the share

I’ve got a couple of different products from Hirsch and I like them a lot. One of them is a set of tool racks for garden tools like shovels and rakes. The brackets for this tool rack are adjustable. I’ve got two of these but I only have four of the brackets. Does anyone know whether additional brackets are available anywhere? In regard to the instant video, I prefer to buy American products too. However, talk is REALLY cheap. So, if you’re as upset as your dialogue suggests, then put your money where your mouth is and send them back. Otherwise, get off of your high horse and move ahead with the rest of the video.