what a totally useless video, complete waste of time. jeez
@karenmusa3052Ай бұрын
Just found your channel ❤ Have subscribed 😊
@karenmusa3052Ай бұрын
Great tutorial, can't say I've ever seen water frozen into a mould like that lol very cool. Thanku.. Ps love that song too ❤
@studio__yoyoАй бұрын
Thank you so much for watching!!!
@SM-ff2sy2 ай бұрын
Ok so I'll make the mold and then drink coffee in another mug because my coffee wouldn't go into the mug i made. Hmmm nice!
@essengerbionicle2 ай бұрын
wait till bro finds out about mold release spray
@Tfirpi2 ай бұрын
A friend that works with monster makeup he suggested putting vaseline on the laces so it doesn't stick.
@studio__yoyo2 ай бұрын
I have heard that before, thanks!
@ricksteen9353 ай бұрын
If I’m making a silicone mold of this concrete thing, what type of release agent do I use on the concrete before I pour the silicone?
@studio__yoyo2 ай бұрын
If the concrete is smooth you can use a regular silicone release, but if the concrete surface is rough or has lots of air pockets, you should try to smoothen out first. I hope this helps, thanks
@JK-ib6qz3 ай бұрын
Can u able to drink tea in that... 😅😂
@studio__yoyo3 ай бұрын
I have to try next time, haha...
@nickschwarz40123 ай бұрын
Did you use anything between the mold parts 1 and 2?
@AQUARIUMFREAK123 i have silicone molds made with SMOOTH ON platinum silicone... I also am making aquarium decorations so i need a good mold release that is not only AQUARIUM SAFE but i need to paint them... Can i still use your idea safely for these 2 applications.?. or can you recommend a formula for silicone molds ? thanks Reply
@studio__yoyo3 ай бұрын
I don't know for your application but Silicone Release Spray can be washed so you should be able to paint and used it in the aquarium...
@kevinfoxxy6 ай бұрын
How long do I have to wait for the homemade agent to dry before I start pouring?
@studio__yoyo3 ай бұрын
Sorry for my late reply, just a few minute is enough, thanks!
@truck68596 ай бұрын
What kind of demold spray did you use? I only found some that says, "not compatible with silicone to silicone applications (2 part molds)".
@studio__yoyo3 ай бұрын
Sorry for my late reply, I always use Mann Ease Release 200, thanks
@nfgmusic6 ай бұрын
Wow! Why the straw for air? Ty! I’m 3 years too late…
@studio__yoyo3 ай бұрын
When you are pouring the material into the mold, the material will keep pushing the air out to gain its space, the hole(made by the dowel) is to exit the air.
@illburnmyselfforreal7 ай бұрын
I'll take the converse
@studio__yoyo3 ай бұрын
They are really cool!
@illburnmyselfforreal3 ай бұрын
@@studio__yoyo Don't destroy them! don't destroy any converse!
@velerina20178 ай бұрын
Hi. Could you help me with this? How do i get my silicone sealant to be more liquid and runny? I want it to dry slower, so that i have the time to work on it creatively
@studio__yoyo8 ай бұрын
Thanks for watching the video and asking. I did have the same issue with the pot life=working time. I think the silicone in this video had a 30mins pot life and one time I ran into a huge problem making a big mold. The silicone start curing before finishing the pour, ending up slowing away a big chunk. I only can recommend to buy a new silicone that has a longer pot life. This product for example: www.rawmaterialsuppliers.com/product/magikmold-t-124-tin-cure-silicone-rubber/ you can change the pot life with a different catalyst=hardner...
@Crucial6688 ай бұрын
Beautiful I wish get that mould 😅
@studio__yoyo8 ай бұрын
Thank you for watching! Yes, I wish I can sell the mold but its the only thing that prevents from "copy cats" so I have to keep it with me....
@amaliajones4519 ай бұрын
Wow, what an awesome job! And thank you for sharing your failed attempts! It shows that perseverance always pays! :)
@studio__yoyo3 ай бұрын
Thank you so much! Failure is the only short cut to success!
@StBascha10 ай бұрын
Whifh Clay do you use? With The one i use the Silikon dont dry out
@studio__yoyo10 ай бұрын
I always use polymer clay. They don’t dry out and can be reused again.
@TahreemfatimaTaefam11 ай бұрын
Can you made lipgloss mold?
@studio__yoyo10 ай бұрын
Thank you for asking but I don’t make molds for other people at this time. You can check my old video where I made a toothpaste mold for a reference. Thanks
@l.e.m.r.958411 ай бұрын
No quedo muy bien. Peri interesante tu video
@studio__yoyo10 ай бұрын
Thank you for watching! Only way to work it out is to Keep trying!
@SP-io7lj8 ай бұрын
If yours didn't turn out well, keep trying.
@studio__yoyo8 ай бұрын
Yes, I 100% agree!@@SP-io7lj
@krodkrod8132 Жыл бұрын
I do blacksmithing mainly, but recently got into lost wax silver casting. I have been using silicone molds then filling them with wax to use in my silver pours. When making a multi part mold, Let each part of the mold completely cure first. If its not 100% cured, the next part of the mold will really stick to it after it sets up. But if the first part is 100% cured, you can peal the next part away without mold release. It will stretch your mold though and shorten its lifespan. I use Vaseline but only a super thin smear. Works perfectly and doesn't interfere with the silicone hardening process. Right now I'm working on a 3 part mold of a life sized medical grade human skull replica that will be poured in .999fine silver. I have the first 2 parts of the mold done and waiting on the full cure to pour the last part. I forgot to put Vaseline on before the second pour. Worse case scenario i will have to cut it with a razor. But I'm confident it will separate. I'm using 2x number 12 graphite crucibles each with 22 pounds of silver. It should be enough.
@TheCollectorEdd7 ай бұрын
So.. where is the video? All you have are dash cam videos on your channel. Talk the talk..
@krodkrod81327 ай бұрын
@@TheCollectorEdd I'm not a youtuber lol. You think everyone puts videos of everything they do on the internet?
@TheCollectorEdd7 ай бұрын
@@krodkrod8132 Why not.
@krodkrod81327 ай бұрын
@@TheCollectorEdd Not everyone knows how to do video editing, and my time very valuable. more valuable than making youtube videos. The videos on my channel were for personal reasons and insurance reasons. I don't care if people watch them.
@bobcarwell9172 Жыл бұрын
I think a very important thing is being overlooked. I'm no expert but I've looked at a <LOT> of videos on the subject by professionals. I have consistently watched them say that releasing is only one of TWO functions providing by a release. The second function is to increase the longevity of your molds, which often can last only last 20-30 casts. They say repeated casts start eating into the sides of the mold, and commercial molds can get <very> expensive. So my "takeaway" is at least use SOMETHING. With resin being as expensive as it is and with commercial release agents not being all that expensive, I'm opting for using them. But very nice, thoughtful video.
@studio__yoyo3 ай бұрын
Thank you and I totally agree, after this video, I always use the Mann Ease Release 200.
@candacegonzalez944 Жыл бұрын
Do you sell the mold?
@studio__yoyo Жыл бұрын
Sorry I don’t…
@GODBODYONE Жыл бұрын
This guy has lost his mind!😂
@jeannetteguajardo2551 Жыл бұрын
Hi! Thanks for you video. Is it possible to get a mold with an empty bottle (you closed it)? I mean, you can add water or coke inside the bottle.
@studio__yoyo Жыл бұрын
Hello, and so sorry for my late reply. You can check slip casting, a common way that most of the ceramic cups are made. Or checking out how the Japanese iron kettle are made from two parts mold, in this case the inner mold are to be broken each time. Hope these help…
@jeannetteguajardo2551 Жыл бұрын
@@studio__yoyo Many thanks!
@CynthiaWithLove Жыл бұрын
Bud you over-sprayed some on the home made one, so I can't be sure.
@ורדרוסמן Жыл бұрын
I would love to know how to make a silicone mold in the shape of a shell for a candle
@richardschoonover3675 Жыл бұрын
Thanks for the video. Just what i was looking for!
@studio__yoyo Жыл бұрын
Sorry for my later reply, Thank you for watching!!
@svetlanagutic3449 Жыл бұрын
Nice job 💕
@studio__yoyo Жыл бұрын
Thank you for watching!!
@rickydiaz4471 Жыл бұрын
Nice idea, as a demonstrator the iced content test is great, thanks for the whole process showing.
@studio__yoyo3 ай бұрын
Thank you for watching, hope to be inspiring!!
@tike9405 Жыл бұрын
Sad about the nice shoes... 😒
@leamercatwild3354 Жыл бұрын
Thanks.
@studio__yoyo3 ай бұрын
Thank "you" for watching!
@Febi_Me Жыл бұрын
Thank you so much !!
@studio__yoyo3 ай бұрын
Thank you for watching!!
@newlasound Жыл бұрын
Nice job!
@studio__yoyo Жыл бұрын
Thank you!!
@iamthemulisha2 Жыл бұрын
Couldn't you just do a thick coat of wax on the laces?
@studio__yoyo Жыл бұрын
I'm pretty sure you can.
@mattersofthehartbynat8815 Жыл бұрын
Very interesting, that’s for sure! Not too practical but a great art piece! Also, if I may suggest something? When you put your comments on the screen, during the video, it would be great if you made more noticeable (maybe a different colour than white) and also left them up there for longer… that would be great! I was constantly pausing and rewinding to read your comments. Thanks for the great videos tho… I love them!! ♥️♥️🇦🇺
@studio__yoyo Жыл бұрын
Thank you so much for watching and understanding my intention = experimental art piece. Really appreciate your feedback that my insertions were too short to read. Very good point! Thank you so much checking in my channel!!
@mattersofthehartbynat8815 Жыл бұрын
That was awesome!! What a brilliant piece of art you were left with! ♥️♥️🇦🇺
@studio__yoyo Жыл бұрын
Thank you so much for your comment!! It's a fine line between art and garbage... I really appreciate you see it as art!
@mattersofthehartbynat8815 Жыл бұрын
Hi, I was wondering if this silicone mold would work for making a resin bottle rather than an ice bottle? Thanks. ♥️♥️🇦🇺
@studio__yoyo Жыл бұрын
Hello, Sorry for my late reply. Yes, for sure it will work with resin. I was thinking to make a sugar glass bottle from this mold, like they use in the movies!
@javierfito5077 Жыл бұрын
can you tint tin silicone with acrylic paint while mixing?
@studio__yoyo Жыл бұрын
Hello, sorry for my late reply, I don't think you can.
@rakeshkokal2 жыл бұрын
We're can I get this mould
@studio__yoyo2 жыл бұрын
I made it! kzbin.info/www/bejne/j2rIqISvo5ykgq8
@rakeshkokal2 жыл бұрын
@@studio__yoyo do u have any another mould alao
@rakeshkokal2 жыл бұрын
@@studio__yoyo what will be the price of that nould
@studio__yoyo2 жыл бұрын
@@rakeshkokal Sorry, I don't sell molds...
@kroger85072 жыл бұрын
I wonder why add recycled sulicon blocks ? Can you tell mr the reason added this one? Thanks , so heal my soul by watching your video
@studio__yoyo2 жыл бұрын
Hello, Thank you for watching! Recycled silicone blocks are simply a filler to save silicone pour since its not cheap...
@kroger85072 жыл бұрын
@@studio__yoyo thats true , in Taiwan 100cc cost 40NT Dollars , quite not cheap , learned a lesson ,thank you
@kroger85072 жыл бұрын
Great , this vids is whatvi looking for
@JanBinnendijk2 жыл бұрын
nice result, but the seatplane is too flat, it should slope back more..
@studio__yoyo2 жыл бұрын
Thank you for watching and yes you might be right but I followed the original design and it doesn't feel so flat though.