Diner Mug Silicone Mold and Poured Over Coffee!

Two part silicone mold making from a Diner Coffee Mug. I poured over Coffee and froze it. Then you will have Diner Mug shape Iced Coffee!!
The Silicone Rubber I used:
Magikmold® T-124 Tin Cure Silicone Rubber
www.rawmaterialsuppliers.com/...
If you liked the video, Please hit the "LIKE" button and "SUBSCRIBE"!!
MORE VIDEOS COMING SOON!
THANK YOU!

[@rickydiaz4471]

Nice idea, as a demonstrator the iced content test is great, thanks for the whole process showing.

[@studio__yoyo]

Thank you for watching, hope to be inspiring!!

[@USAlien234]

Thank you so much for the video. What a cool idea. I actually learned a lot from watching. I wamt to get into making molds and casting. This video shows me everything I need to know to get started. That song thou. It was amazing. I pray your staying safe out there. ✌ ✝ ❤

[@studio__yoyo]

Thank you thank you for watching the video and happy that it motivated you! One thing that all my videos don't show is that I test many times before shooting... And my only advice will be to test, test, test, before the final. Get used to the materials, get used to the process. You as well stay safe!

[@sarahishaka7135]

This is lovely the song is😍

[@travisa8176]

Came for the tutorial, stayed for the soundtrack. Song listing???

[@joebolling]

Not sure how functional a coffee mug made of ice would be? But the videography was excellent! :)

[@studio__yoyo]

Thank you for your comment!! First time that someone commented on my videography... Feeling excellent!!

[@JK-ib6qz]

Can u able to drink tea in that... 😅😂

[@studio__yoyo]

I have to try next time, haha...

[@user-qu4md7el6o]

I would love to know how to make a silicone mold in the shape of a shell for a candle

[@irishman7scouse]

i want to pour silicone into a ceramic dish ,there is a celtic design at bottom.dident know what kind of release spray to use on ceramics,,i do now so thanks to you.i allso enjoyed your video and the music

[@studio__yoyo]

Hello, Thank you so much for watching! Sorry for my late reply... If it is against a ceramic you don't need to worry so much about the release. Any silicone release spray will do. Just pour a little bit of silicone on the ceramic and see it it comes off. It should come off without any release agent. Best of luck!

[@Heartwing37]

Why?

[@andreaplattner7930]

do you have a material list

[@studio__yoyo]

Polymer Clay, Silicone, Silicone Release Spray, Dowel

[@brynmorgan9294]

Absolutely great video! How would you make it in order to make a functional slip mould or mould that you could use to make a functional mug or tankard/goblet that I could use to pour in pewter?

[@NanaVonn3]

Same reason I'm here, except that I want to cast a stemless wine glass rom resin

[@GODBODYONE]

This guy has lost his mind!😂

[@javierfito5077]

can you tint tin silicone with acrylic paint while mixing?

[@studio__yoyo]

Hello, sorry for my late reply, I don't think you can.

[@winstonchaychel]

What kind of clay did you use? I'm attempting my own 2 part mould and the only clay I have is Sculpey brand which I know won't work. Do you think a homemade flour or cornstarch clay would work? 🤔

[@studio__yoyo]

Sorry for my late reply. I always use polymer clay and you can reuse it after. Never had an issue.

[@winstonchaychel]

@@studio__yoyo TYSM!!! I tried a piece I had mixed a little and poured on and it cured ok but the bottom wasn't cured very much 😅. I decided to try and float it instead (using a few scrap pieces of silicone from one sided molds) so fingers crossed it comes out okay 🤞💜

[@rakeshkokal]

We're can I get this liquid

[@studio__yoyo]

Thank you for asking! Please check the video description for the Silicone!

[@sylviaballard7045]

Great video...what is name of the first song playing? Thank you!

[@studio__yoyo]

Dawn Chorus by Racoon Racoon, kzbin.info/www/bejne/in2Qemx9g7WXgNk

[@sylviaballard7045]

@@studio__yoyo Thank you!!

[@jaclynsbeach1307]

What a mess!!

[@studio__yoyo]

I know, mold making is always a mess...

[@SimonLeeds]

?

[@54321Judith]

What a mess!

[@an_what]

You don’t use near enough mold release I mean seriously what was you just giving it a few cute little sprays for the video to go along with the music get serious with this shit man