Hey there 5 months late but what size Shinko tires did you get because my back tire says 80/100-19 and my front says 70/100-19 how do I know what shinko tires to buy
@LoamOl2 күн бұрын
My wheel dont fit to the spacer waht cann i do
@tjfinessedit34474 күн бұрын
Can I put any 31.8 handle bar on my talaria
@imports_cam80475 күн бұрын
what wheel did u get
@Saeyoraa10 күн бұрын
is it hard to reach the paddle shifters ?
@herosliveforever313413 күн бұрын
Hey do the stock inner tubes work with the wider tires
@quinnybagztv7 күн бұрын
Buy new ones
@FF_1357916 күн бұрын
What’s that app tracking your speed
@justosthedon936818 күн бұрын
Take the pea shooter out of the 125 before you compare
@dr.exooj128118 күн бұрын
I just bought a used mx3 for $2500 with 1200 miles and I love it so much
@shanah190419 күн бұрын
Ycf 150 quelle année ?
@ChristisKing020 күн бұрын
Should you rotate tire rubbers to wear evenly? My front tire is practically new, while my back tread has worn
@quinnybagztv7 күн бұрын
You could if ya want I'd just buy new again
@Ls1-ow9tx23 күн бұрын
Can i stick a real car wheel on it.. year 2002 or so?
@andrewhaas20927 күн бұрын
This is helpful but holy shit way much more work then I was expecting or was told 😭
@manninggrinnan621Ай бұрын
Actually
@dicktricklerАй бұрын
If you would move your arse back just a little bit and quit sitting on the battery box, you would put more weight down onto the rear tire and not spin as much. Great video though. I’m gonna purchase a set of these. Safe rides!
@superelfyzacharyАй бұрын
will this work with the G23?
@distressasme99Ай бұрын
Is that the Talaria sting experts or the MX3? Thanks you
@Rodrigo-is1hwАй бұрын
so riding in the rain doesn’t cause electrical issues/damage?
@DanknessFalls-hr7psАй бұрын
Looks sick the stock ones were just fair
@nickoynwaАй бұрын
Damn dood cool car👍👍
@quinnybagztvАй бұрын
Thanks ma dood! 1988 foxbody mustang gt 5.0l V8
@waynewigger9904Ай бұрын
Why 72v alls that does is tare the bike apart bypass or 60v 63ah.mines mx3 nucular p24f my mode 1 is what sport would of been 2/3 are lets get busy modes😮 mines faster then a mates 72v BAC4000
@porterflaum114423 күн бұрын
If I have a 60v 65h I shouldn't run into the BMS cutoff?
@waynewigger990423 күн бұрын
@@porterflaum1144 nope
@CDTDC984Ай бұрын
👌 my dad has 4 or 5 of em
@jahmanborneo1343Ай бұрын
That's a sweet ride.
@quinnybagztvАй бұрын
I love it! Thanks
@SP33DYWasTakenАй бұрын
No offense, but mines cleaner
@quinnybagztvАй бұрын
Lol no
@trikewarsАй бұрын
RIg like Jelly
@truempi.e34Ай бұрын
Which handbrake do you use for the g920?
@hennessy4716Ай бұрын
Talaria Sting ore Surron Light bee =? what should i buy ?
@quinnybagztvАй бұрын
Either are great platforms
@SoPhATyАй бұрын
This was definitely not as straight forward as you made it seem. I ran into problems almost every step of the way. I will list my experience so that anyone trying to do this has an idea of what I went through. Firstly, when trying seperate the wheel from the housing I couldn't manage to seperate them even after taking out all the screws. After a good amount of time I ended up yanking on it (not recommended) and the wheel finally separated. The cause of this problem was the red rotating dial on the front of the wheel is clipped into the back housing and the clip it has to be depressed from the inside in order for the front housing to seperate with the rest of the wheel and this was not shown in your video as this dial is only on the G29 however it's important for anyone wanting to do this mod for the Playstation. Once the wheel had been separated I had taken out the circuit board and was unscrewing the rest of the screws that I hadn't gotten to yet and the two larger screws in the middle of the wheel simply would not come out. They would just rotate round and round even with applying pressure to the housing. I ended up having to get them out with the steel punch. When trying to reinstall the circuit board to the front housing with the buttons I had many issues trying to align it with the red rotating dial button. For whatever reason it just simply would not align properly and after many attempts taking the circuit board on and off multiple times it eventually fell into place. Then once I had put everything back together the paddle shifters would not work. I then had to take everything apart again and it was a huge battle trying to make sure the PS3/PS4 button and the paddle shifters were aligned properly. If I had managed to get one aligned then the other one wouldn't be. It was very finicky. This part would have been a lot easier with another pair of hands, but after a long period of time I managed to get everything lined up the way it should. After that I turned on my PS5 to test it out and much to my frustration none of the buttons on the wheel were working. This gave me a mini heart attack because I thought I'd have to take apart the wheel again or worse maybe I had broken my wheel or caused damage to the circuit board. After a little while a few buttons started to work in the main PS5 menu and then randomly they all started working much to my relief. Once I had got all the buttons working I loaded into a game to make sure the wheel was working the way it should and I found that the force feedback wasn't working at all. I quit out the the game and tried to load back in and again there wasn't any force feedback. I then restarted my PS5 and when the wheel was trying to do the wheel calibration when you first turn on your console it only span to the right and stayed there. I loaded into a game again and the force feedback wasn't working again. I restarted my PS5 two or three more times and now my wheel wasn't even doing the start up calibration and eventually my PS5 ended up crashing. I then turned everything off at the wall and then on again and when I turned my Playstation back on and everything seemed to be working fine after that. I went into a game and I had force feedback just the way it should be. I then restarted my PS5 another 3 times to make sure it was all working fine and it was. I am aware that my experience was probably very rare and most likely won't happen to most people and in the end I am very happy with the mod now that it is working the way it should, however I must say that I do not recommend doing this if you are not good at problem solving or tinkering as I had issues almost every step of the way.
@6rydrter13 күн бұрын
is this the same comment from the other video
@SoPhATy13 күн бұрын
@@6rydrter It is. I used both these videos as a reference when doing this mod so i felt i should comment on both vids
@6rydrter13 күн бұрын
@@SoPhATy oh alright
@Jksn.flyd23Ай бұрын
2:55 Your tattoo is trash
@ayocxrry-2435Ай бұрын
Can you give me the link to these bars ? Can seem to find them
@TerryBob18769Ай бұрын
Where in canada do u live. I live in Ontario Canada and I was wondering when u ride in towns do we need license plates put hopefully you see this and get back to me
@quinnybagztvАй бұрын
Ive been pulled over before and told not to ride it, but ive also recently passed cops and they dont care. Its a grey area for sure~!
@Leroy-ue9rq2 ай бұрын
With my adapter, the screws are now too short. Do I need longer screws?
@Winnis-cx7zy2 ай бұрын
my screw is stripped. it won’t turn i don’t know how to do then
@quinnybagztv2 ай бұрын
The bolt for the brake sensor?
@Winnis-cx7zy2 ай бұрын
@@quinnybagztv yes it is stripped but I managed to remove it
@gregg83442 ай бұрын
why do you proceed to ride through the fuckin middle of the pools of water... are you thinking at all? lol
@quinnybagztv2 ай бұрын
It's fun 😁
@RhettsWorld2 ай бұрын
What is that app called that you used
@ReasonRaider2 ай бұрын
GODDAMN 3k CAD. that’s crazy, I was expecting USD 😂 bro got a 4.2k bike for 2.2, dude literally got half off.
@quinnybagztv2 ай бұрын
ikr!
@joukomutanen47322 ай бұрын
My xbox button doesnt click anymore
@nickoynwa2 ай бұрын
good to see u back mate always enjoy ur content
@quinnybagztv2 ай бұрын
Thanks! Ya it's been a month for both channels lol you know how it is
@nickoynwa2 ай бұрын
People have to work mate bills to pay all good dood
@lhk85582 ай бұрын
Does the controller cut the power after 10s or is that the bms cutting power off?
@quinnybagztv2 ай бұрын
BMS
@COAGY-Y2 ай бұрын
How do u turn the front light off
@quinnybagztv2 ай бұрын
Wire a switch, I got a video on my channel
@1BriceDenice2 ай бұрын
how many amp give the stock bms . THanks in advance
@cokane3002 ай бұрын
hey! where did you get your wheel?
@Kamicazee2 ай бұрын
You think it’ll work for an xxx same way
@quinnybagztv2 ай бұрын
just make sure it's compatible before buying it
@YSSFISH3 ай бұрын
THE BEST TUTORIAL FOR THIS HANDS DOWN. SO SIMPLE AND EASY TO FOLLOW👌🏽🔥
@PoloHungary3 ай бұрын
bypass the stock battery for free more power
@rafakirschenstein74263 ай бұрын
hey man veryyyy good tutorial but can you give me the link for that wheel it look so good but i cant find it anywhere
@Whatelse-gk1fw3 ай бұрын
Best trails ever
@quinnybagztv3 ай бұрын
Thanks for watching
@brwadzik3 ай бұрын
TYSM i finally find the tutorial
@Rroossoonneerroo3 ай бұрын
Are those stock tires?
@quinnybagztv3 ай бұрын
244s
@Goon-It3 ай бұрын
ive been needing new tires for forever. ive been running the stock tires since I got the bike over a year ago
@quinnybagztv3 ай бұрын
Ya these tires are decent but for offloading I'm ngl they kinda suck after using that for a couple months now