THE BRIGHTENER IS BASICALLY SUGAR. iT MAKES THE SURFACE CRYSTALS FORM SMALLER AND THEREFORE LOOKS BRIGHTER, OOPS Caps Lock! A tablespoon of ordinary white sugar in the electrolyte should do the job. I found that online, have not yet tried it myself.....

Gracias por compartir. Yo deseo comprar un r5 año1984

Hi. I am little bit late, because it is one year gone all ready from publishing this video. But I will say this anyway. I found up, that good zinc plating is always alcalic. Yes, it can be done with vinegar, but it is not that good results. But sodium hydroxide works just fine! And there is no need of any zinc salts. I just used 2 zinc anodes/catodes and add some electric to those. I used at firs 10 ampers lika an half an hour, so oxides goes away. Then dropped ampers to abaut half of that, so something like 5 ampers. And let it just do its job. It takes time many hours. At least for me, it took propably abaut 5-8 hours. And thats it. Then just do as always, put some zinc anode and item what want to plate and thats it. No salts, no acids, no nothing, but metallic zinc and sodium hydroxid. Ps. It took very long time for me to get enaugh zinc to the solution. Do not know why, but it gets working after several hours. I tried it after couple of hours and it did not work. Then waiting and solving zinc and at the end it did work just grat! Result is just like from factory. Shiny and nice silver color plating. And PPS. Do not use very much amperes at the plating. I found out, that lover the amperes, better the result. Example: for item size of 2 euro coin, I used 50-250mA current. Lover is better, at least on my experiments. And Extra ps. For copper it works exactly the same system, but only use copper instead of zinc. So, no acids, no salts etc. Only copper and alkalic solutions. For some reason almost every video on youtube, they use acids!?!? And it kind of works.. but result is dark and not very good at all.. Alcalic solutions are just better for zinc and copper. PPPPS. After doing first layer of copper at alcalic solution. Then it is ok to make next layer of copper at acid solution. And why so? Because then it is possible to make it faster. And second layer of copper will attatch ok good on the first layer of copper. I havent tried yet acid copper plating on alcalic copper plating. But I will on near future. Good luck for you on your platings! And thanks for the video!

Thanks for uploading! Very informative video. I have heard that TIN is an old world go-to for brightening nickel plate solutions, perhaps it is worth a test on zinc.

QUAIS OS PRODUTOS DO BANHO ZINCO ACIDO?

Brightening in 1% Nitric Acid for 1 to 2 seconds.

I love the brakes on a Renault 5, as it's so easy to change the pads.

Quel est l'intérêt de claquer autant d'argent dans une bête auto comme celle-ci ? J'ai 3 Toyota Starlet des années 80 qui roulent, entièrement d'origine, peinture comprise et rien à souder . Payées entre 1000 et 1500 euros . Contrôle technique ok . Je roule en rallyes carto avec . Rapport prix-amusement incroyable .

search for two videos: DIY Bright Zinc Plating and DIY Bright Alkaline Zinc Electroplating. Here in Brazil I didn't find these or similar products, I would like to discover something alternative to replace the brightners used in these videos.

How noisy is it at the lowest level?

What is "chlorhydric acid"..?

Que motor lleva ahora ?

hello brothers hello brothers

A vehicle as important today as it was yesterday and well worth saving. Mines is a humble 1400 ts.

Tienes algún manual del motor ??? Tengo el mismo y lo quiero desarmar

Use pva or macrogol as primary brightness enhancer, additionally vanillin

😪 Promo-SM

I have yet to test it myself, but it seems that Vanilin can be used as a brightener.

Waiting for the next! :)

Hola, podrías indicarme donde comprar la moqueta del suelo? Gracias

Salut, Tu peux utiliser la poudre de verre combien de fois avant de la remplacer ? Merci.

Please make it quicker for viewers, im your fan , do your best

Y oa parte dos amigooo!!!😢😢

😴 promo sm

Please put the before/ after image as the cover image. It's so satisfying and will reach to more people

the piston 70 or 76 and tell my the number série of your motor thanks man

Hey thanks for the video! What tipe of nozzel does it use? Tipe 1 or tipe 2? Or someting else?

👍👍👍

Waiting for the next one...

Is the extra power outlet uk 3 pin plug? Can this machine be used without the bags. Great review. !

Great video. Thanks for making it. Would also like to see a video with only the correct formula. But it's good to see the mistakes to. Judging from what I see it looks like you have a solid electroplating on your items. Also I like the idea that you are trying with safer to use chemicals. I did electroplating years ago and it was an arsenic based solution which I bought from a company , nasty stuff. So I am also looking around at videos for safer products. Thanks again

🤩🤩🤩🤩🤩🤩🤩🤩🤩

good job. i would make another video of the method that works in step by step version. thank you for sharing

Eher der Pfusch

😃😍🛠🥾🛠👍🔧👍

The importance of small details ;)

Excellent! The interior of the car is very laborious

Mask up when using grinders my friend. Those particles will destroy your lungs.

Ружна боја,и ниси скинуо тапацир с крова изнутра.Није гола шкољка

Ourense? Somos vecinos...(Porto)

Good job!

3k

Buen vídeo, interesante historia

Buen vídeo, un artista sí señor!!👍👍

Good👍👍👍👍❤❤

Don't miss the extra comments activating the captions ( subtitles / CC ).

Eres mas de Bellota o de Chiruca?

Great video! Thank you for sharing the unboxing, setup and first blasting with our HBM SBC 190. 💪