009: TWISTING WIRE EASILY AND QUICKLY!

How to quickly twist 2 or more wires together in long or short lengths using a simple cordless drill. This is helpful when your manual calls for twisted wires (like power and ground wires) and you need a relatively long piece. Note that this works for pieces as long as you have room! Demonstrated by Mike G. of SteinAir, Inc.

[@tylerheffernan3498]

I usually run the drill in reverse for a few turns before unchucking. After a few you'll get the feel for how much to reverse to avoid the spring back. If you do it right, the twisted wire will come out of the drill and not untwist at all. This is coming from 15 years in the car audio and security world and tens thousands of twisted wires.

[@meh7517]

Hey man excellent video this really helped me out, just some advice it'd be nice to see multiple different ways to secure the wire that you're twisting. Depending on the equipment, or extra sets of hands the different variations of securing the opposite end you're twisting down.

[@張佳偉-z3o]

Can't wait for giving it a try! It appears to save me lots of time...

[@Jorokusaki]

Cool thanks! Been looking for techniques to apply to jewelry making!

[@isaackivah]

Genius. Thank you sir

[@apal1257]

Great tip for my jewelry wire. Thanks.

[@shaungutierrez9411]

If you run the wire between your fingers as you did before releasing from the drill chuck with maintained tension (wire taut), a few times from end to end... then the wire will form straight. Of course, slowly release. It should not tangle up.

[@abhijitganu7771]

What is wire length reduction after twisting? If I want 10 feet twisted wire how to know length of wire before twisting

[@vosborne945]

I tried it with silicone covered 16 gauge and had snapback every time.

[@tubefictitious]

Very helpful, just what I was looking for. Can I ask what you attached the unseen ends of the wire to? Thanks!

[@kilgoretrout5456]

A vice works best.

[@rjc0234]

Thanks for the great tip! I hope i don't forget

[@cr4bee]

Here’s a reminder for ya in case ya forgot

[@rjc0234]

@@cr4bee Thanks! Thankfully this is one that has stuck with me, and i regularly use it on my electrical projects!

[@leeguitarmcr]

How are you fixing the wire to the tension point?

[@ryanb1874]

Can someone come up with a drill hack to cross grade 2 or more wires to end up with cylindrical mesh, that would be great...

[@J.D_YT]

Works for speaker wire great

[@shawn576]

Good to know. Thanks!

[@torresgonzalezdiego]

More vídeos please!

[@harryniedecken5321]

How would you make 200 ft though, that is my goal.

[@godsballroom5298]

Can I do 4 at a time or only 2!!

[@besarazemi6541]

As much as a drill can fit

[@jamesh1758]

Why did I google this after twisting 2m by hand. Took forever

[@gaojing9072]

what is the brand of this tool ?

[@waheed002]

⁰