02 Honda CRV P1077 code

[@TradingBotWizard]

Very thorough! Great video.

[@NgkKniferZ]

Great video what is the name of that valve ?

[@edwinmartinez1756]

Thats the intake manifold runner valve.

[@samrobinsonfilm]

Thank you for making this video, much appreciated -Sam

[@edwinmartinez1756]

Glad it was helpful!

[@samrobinsonfilm]

@edwinmartinez1756 I changed the valve and entire intake assembly from my previous crv (known working, same year) and still have the P1077 code. I also put a multi meter on the 2 wire plug and got 12v on one wire and ground on the other. I also put a mityvac on the intake and heard the runner moving with vacuum applied. Do you know what my next thing to check is? Thank you

[@edwinmartinez1756]

@@samrobinsonfilm Hey Man it sounds like you did everything right, I would just go back and double check everything also check the intake tube for cracks or a loose clamp, you could have a vacuum leak causing the problem. what was wrong with the other intake set up?

[@ottoporres1301]

Thanks for sharing your knowledge

[@AbsentTribe]

I’m trying to find that part you got at Amazon no link ?

[@edwinmartinez1756]

Here you go buddy ….Genuine Honda 36163-PND-A01... www.amazon.com/dp/B00IFPD0V8?ref=ppx_pop_mob_ap_share

[@AbsentTribe]

@@edwinmartinez1756 thanks a ton

[@paulpat8845]

Hi i need help with my crv, i disconnected the hose from the diaphragm to the solenoid. There is a vacuum from the solenoid. Should there be?? I watched your video but im also watching others and some are saying different. Please help ty!

[@edwinmartinez1756]

Im not sure if when the car is on and idling the solenoid has power if it does then theres should be no vacuum but if there is no power going to the solenoid, then theres should be vacuum because The solenoid is normally open. I hope this help my diag was with the engine off and I was able to fix it.

[@paulpat8845]

Thank you replying and thank you for the helpful video. So i just replaced the solenoid, when the car is on, it has vacuum from the solenoid. Im guessing there is no power going to the solenoid then since you’re saying that the solenoid should be shut when car is on and if there is power going to solenoid.