03-07 Honda Accord P1157 02 heated oxygen sensor o2 replacement

Replacing 02 sensor in honda accord to fix p1157 code.
Hey guys! If you find this information helpful and would like to thank creator for his time and effort. You may donate any amount you would think is appropriate to [e-mail] via Paypal.
Money will be used to buy new equipment to improve quality of the videos. Thank you for being awesome!

[@langleyjackson6321]

This video was the best one out of any vids on KZbin for changing out o2 sensor thank you my guy

[@neojoneswd]

Good job. I have the downstream sensor to replace but wanted to see how to do the upstream sensor. Prices for upstream are higher than the downstream, almost double from stores. you got yours from Ebay about the same price as downstream in stores. FYI THANK you for showing us how.

[@noecastellanossanchez5211]

Thanks amigo for your greatest help

[@immortalhour3888]

I had same problem with my 06 Honda Accord however I found using 7/8 wrench is a lot easier than the oxygen sensor tool just need pull back the cover around exhaust

[@neojoneswd]

watched this replacement and another different sequence sensor and both were very informative-thanks

[@darrengwright]

Thank you for recording this video. You just saved me a lot of money!

[@repaired2106]

+Darren Wright that is a purpose of my videos. Enjoy :)

[@luisasantiago4260]

Do I have use the sensor tool ? Could throw upstream sensor be use for the downstream or only downstream has the plug?

[@luisasantiago4260]

@@repaired2106 I have an 04 Accord

[@ryanbrown3485]

Great Video! I am going to try this soon!

[@waldoflo711]

Thank you for posting this video!

[@repaired2106]

Thank you for your comment!

[@kkinesis5310]

I greatly appreciated your showing exactly how the connector comes apart - THANK YOU!.... now in your next video, please include "Captain Kirk, Klingon warship approaching" - ;)

[@pamm5287]

Just wanted to let you know that your not supposed to even touch the end of that sensor, because they're so extremely sensitive.

[@robertcoffey1636]

Nice video thanks ,did you change the sensor from the top or did you have to Jack up the vehicle? Thanks

[@hidalgor1387]

Is a 06 & 07 the same sensor

[@waseembux7537]

Hi when you had this error . Did your car over fuel and the revs hang when you put hour clutch in ?

[@MsFrenchDream]

Отлично, спасибо!

[@repaired2106]

Пожалуйста!

[@SonikJesus]

Thank you!!

[@orlandomora7398]

If sencer is bad would that cause engine to overheat ?

[@luistamayo5421]

I had my code read 00,00,11,57 do u know what it is?? Thanx

[@rmmccarthy1240]

I don't know what it is. But my guess is that it is the PO1157 code. PO1157 is the oxygen sensor code that ED is working on in this video.

[@canuckfixit7722]

Did you install an OEM sensor or aftermarket and did this work permanently solve the 1157 code?

[@neojoneswd]

I never replaced the upper O2, after a week it never coded again, after reading the downstream. Sometimes it may take time to adjust to new sensor.

[@sidcedar]

Don’t you have to unhook negative battery cable first?

[@hondaaccord9229]

Thanks!

[@antoinetinker690]

What tools did you use?

[@Dave4R6]

Hey Edgar, Thanks for the this great video. Your Honda Accord is a V6 or a 2.4lt? I own a 2.4L and I was wondering if is the same O2 sensor that I need to buy at Ebay. Thank you.

[@Dave4R6]

Sorry. I just noticed you have a 2.4lt. Same as mine. Thanks for the video again.

[@repaired2106]

=) Hope this solves your issue

[@zmstudiochannel]

Great dear

[@repaired2106]

Thanks for the visit

[@neojoneswd]

i checked my codes the other day and it showed P0141, which is the downstream O2 in the Cat. I replaced it no codes. Couple hours go by Engine Light Back ON! Check code, this time P1157!!! Why didn't BOTH codes come up at same time if both bad!? Watched your video, look lots easier than the Downstream O2 so now that will be done! If i get a code saying the Cat is bad after that-i am going to shoot my car! Thanks for the vid! By the way my shops charge about $170 for this sensor!! So i will be looking at Ebay or if you know where you got your OE part-email me!? Please.

[@youngdex7]

was your cat stalling by any chance

[@SonikJesus]

how do you know if the one you need is before or after cat? my code shows p1157

[@repaired2106]

Should be same one I did

[@youngdex7]

could this cause my car to stall

[@neojoneswd]

i have a 2004 accord, need same sensor as you - 234-9040. $70-80 is not cheap because the part stores want $103-144 where i live. I know going on line i have seen $45 from some part mfgrs. But if you look at the reviews, they are varied..Honda is very picky about some of its electrical components and they charge a fortune if you buy from them. But i have seen reviews from the buyers from online part makers who say the O2 they bought for $30-70, failed after a month, or even sooner. I am thinking of one for $45 from one seller but one review was negative-like i said Honda is picky on after market. Denso parts, which are in Autozone, O'Reillys stores are good. The downstream for my car cost $50! The upstream for Denso is $103+tax, $115! That is high because the downstream was bigger, harder to put in, etc. Anyway you got yours on Ebay, it looked new? I will look there before buying but i would think Ebay parts may be used or not as trust worthy. Could you let me know how long yours has been working, what brand it was? Thanks-great video by the way.

[@hcampa79]

Always buy denso for hondas. They have never failed me

[@jerrygiarratana9462]

why did you not show how you actually took it on and off what a waste