03 Altima V6. Power Steering Pump replacement part 2.

[@gregstovka]

Thank You for your video.. I just completed a belt replacement for the power steering. I ended up having to use a zip tie to slip the power steering belt on the power steering pump pully.... I have a 2003 Nissan Altima V6 SE {VQ35DE} engine.. My headwinds on this job were many, " God Bless America". I hope that I never have to replace that power steering pump...

[@mrfixit-sm6cf]

lucky for u ,u got a lift im doing this in rocks and the vehicle hieght off the ground is limited...but thx for the video

[@tjtewshews5531]

How did you end up breaking that back bolt free?

[@Korea_MostWanted]

I just replaced the power steering pump for first time. I used 3 ft extension and 14 mm swivel socket and another 3/8 swivel to got it out between the exhaust manifold but putting it back together was extremely difficult. This job on the pay 1.5 labor. 14 mm long bolt kick my ass today......ㅠㅠㅠ

[@tjtewshews5531]

How did you loosen the back bolt? I can't break it free. I've got everything else off except for that one bolt. I can't find a way to get more leverage. Any ideas? Maybe a jack under the wrench? I think it has enough of an angle for it.

[@jfj138]

be patient, use the 14mm wrench to break loose. you may not see the bolt but use your hand to locate it first, you can do it.

[@tjtewshews5531]

@@jfj138 I can't do it! I'm too weak hahaha I'll keep trying though.

[@jfj138]

Thomas Wilkerson you can do it, use second wrench locks on the first one as leverage.

[@tjtewshews5531]

@@jfj138 Thanks, I will try that. I knew this was going to be extra tough when you said " God bless america" haha.

[@johnnyappleseed1598]

@@tjtewshews5531 use flex head wrench if you have one. www.amazon.com/Craftsman-Release-Teardrop-Ratchet-9-44815/dp/B00065T0YG/ref=sr_1_24?crid=1KXJZGYR4ABKT&keywords=3%2F8+flex+head+ratchet&qid=1582680592&sprefix=3%2F8+fle%2Caps%2C249&sr=8-24

[@AbouTto_]

thank you