06 Dodge Charger Daytona with Hellcat blower on 5.7 hemi

Small montage of pictures and videos throughout the installation process of installing a hellcat blower onto my 6th gen charger daytona with a 5.7 hemi. mod list would include ... Custom Cam, beehive Valve springs, push rods, lifters, oil pump, new oem gaskets all throughout, NGK IX plugs, water pump, blue top transmission solenoids, 160° tstat, 15% underdrive pulley, e85 kit, ice tank, complete suspension kit, jba headers, slp mufflers, metco pulley, Hellcat Supercharger, custom fuel rails, Hellcat Valve Covers, pcv system, catch can, hellcat k&n Cai, fuel pressure gauge, hellcat supercharger master gasket kit, adapter Plates for 5.7, Adapter Plate Gaskets and Bolts, ldler Pulley Bracket and Pulleys, Auxiliary Water Pump, Coolant tank and Bracket, Heat Exchanger, Boost Controller, Hoses, Clamps, and Fittings for cooling system, 525lph Fuel Pump, Drive Belt, Accessory Fittings, Boost gauge, afr guage, supercharger coolant temp gauge, 3 gauge pod, and multiple custom tunes. I'm sure I'm missing a bunch, but that is just the performance mods. #cam #hellcat #hemi #camshaft #supercharged #daytona #dodgecharger #dodge #hellcatcharger #345hemi #twinscrew #helltona #610whp #spinning #cars #1320 #boat #landyachtz #gomango #slp #compcam #mmx #boosted #boost #carsofinstagram #cars #musclecar #modernmuscle #bitcoin #montage #collage #fastandfurious #slow #eastcoast #boatlife #bigbody #captain #hemicharger #707hp

[@kenyontookes7644]

I’m glad I see somebody else did it. I been wanting to do this to my 6.1 hemi

[@Mark-g3e7v]

There's those goose-bumps again!😎👍✌🇨🇦

[@dannyandrew1833]

That’s sick ass charger bro and build would love to do this to mines

[@lonzyrt7351]

Nice.. damn nice build.. thanks for sharing

[@Drillstheruler]

great professional installment holy shit

[@Drillstheruler]

one day ima have it one day im stock o8 hemi rn

[@cjs9477]

Arent the hallcat superchargers like 12lbs boost? going into a stock bottom pre eagle 5.7 I like it but damn hope she dont quit on ya

[@brandonrowland3]

A stock hellcat makes around 12 lbs of boost. I have a boost controller. I usually only run 8-10 lbs, but thanks for your concern.

[@terrypenacho9854]

Just seen in description

[@Budge_Cat06]

We’re did you buy the conversion kit ?

[@brandonrowland3]

Mmx sells the adapter plates.

[@PRFCTAIM]

Did you change out original valve seats?

[@greedyboyctb]

I really would like to this but am only limiting to so much information online, can you please send me a step by step of how to do this, with everything needed to do this down to the last dollar ?

[@The_MotivatedMan]

Did you buy the mmx kit or just got the pieces one by one?

[@The_MotivatedMan]

Are you running hellcat injectors?

[@brandonrowland3]

Yeah

[@deontenations9498]

How much hp did it add?

[@brandonrowland3]

It makes 620whp now

[@kenyontookes7644]

So it was at what 385 at first and got up to 620😬 throw a turbo set up with it and I smell a actual hellcat killer

[@terrypenacho9854]

Where you that kit and how much 💙💯

[@brandonrowland3]

Mmx sells the adapter kit. It was around 10k for the parts and tune to install the hellcat blower.

[@mattcat234]

What are you using the control the blower bypass valve on the front of the intake elbow during non-boost driving? Is it still vacuum controlled?

[@chrisd9961]

Hello from 3124

[@just_a5.7]

Can you do this to a 2019 5.7?

[@brandonrowland3]

Yes mmx makes an adapter kit for the 2019.

[@KushmaneCeo]

How much u charge to fix mines up like this lol

[@brandonrowland3]

I only work on my own vehicles. You could probably get a shop to do it for you for about $15k

[@iheartcbd816]

Fucking Golden 😊

[@SLYQZZ]

Full send it let us see

[@brandonrowland3]

It's in the garage for winter.

[@SLYQZZ]

Sounds like it needs a tune idk .

[@brandonrowland3]

Yeah, the first video was during the data logging for the tune. It kept going into limp mode it had over 20 tune revisions.

[@just_a5.7]

Would it be easier just to whipple?

[@brandonrowland3]

Depends on what your definition of easier is. They both essentially require the same amount of work to install.

[@GOD2FAST]

Did you gap your rings?

[@brandonrowland3]

Nope, stock short block.

[@madwestboy]

@@brandonrowland3 nice build bro. i have a 2007 daytona, trying to find some highflow cats

[@brandonrowland3]

@madwestboy thank you, and Summit sells high flow cats for the 6th gen.

[@CarsandCuts]

Hey bro what’s the extra part next to the pulley, you didn’t just reverse it to make the pulley work? You added something else ?

[@brandonrowland3]

They're the Idler Pulleys and Bracket that you need. You get them from mmx once you order the adapter plates.

[@georgiaboy1579]

Outstanding work Sir. Love the car and the mods! Just subscribed and can't wait for more

[@brandonrowland3]

Thank you!! I wish I would've taken more footage last year instead of driving it. She's in the garage for winter but once the weather breaks I'll be posting more.

[@starplatniumzawarudo9865]

How did you get it to whine like a hellcat

[@just_a5.7]

How did u get it to whine so much

[@MeetDaGhost]

facts

[@Drillstheruler]

hellcat snout ports and air filter

[@Randomknowledgebox]

How much was the conversion?

[@dylanhanes7205]

Fn badass man I'm doin a 6.1 swap on .my yellow 06 daytona it's been sittin for five yrs got a 06 300 srt 8 and had it 3hrs got hit at a red-light so now gona try bringing daytona back from dead but this makes me less interested in mine very nice setup sounds great very nice ride all round mines rough as hell all round but I still love it

[@nichollasscott]

what kind of fuel line you running ?? is it with your stock fuel line because i have a hose on mines with hose clamps and need better fuel supply line so what are you running

[@brandonrowland3]

It's custom. I have pressed on hose from the stock 6an with several fitting onto the 10an hellcat fuel rail. If you pause the video at :32 you can kinda see the setup.

[@nichollasscott]

@@brandonrowland3 bro thanks for the reply . i really appreciate that .... but any ideas on what i can so i dont end up having a fuel leak and juss having a hose with a quick disconnect and hose clamps

[@able_trucking780]

On the blower u used a smaller pulley? And also the serpentine adapter is from mmx or defier?

[@brandonrowland3]

Nothing on my vehicle is from defier. Most of the parts you will need come from mmx. You will need to get a metco pulley or similar pulley so you can flip the pulley onto the hub to run the 6 rib belt.

[@able_trucking780]

@@brandonrowland3 did you have to use the bypass valve from mmx

[@brandonrowland3]

@able_trucking780 No, the blower I bought came with the stock bypass valve. I ordered the Supercharger to Head Adapter Plates, Adapter Gaskets & Bolts, Idler Pulleys & Custom Bracket by MMX, SmoothBoost Electronic Bypass and boost control, and all the map extensions from mmx everything else I pieced together from other places.

[@CarsandCuts]

What size pulley? Can it be griptec

[@brandonrowland3]

@@CarsandCuts I'm running a 2.75 pulley because I have a 15% underdrive crank pulley. Griptec will work.

[@derekprice5510]

😎

[@MOPAR34507]

Love the build! It’s what I’m wanting to do for mine! You gotta get some more videos of driving it!!

[@kevinmoyeda2514]

how much money did you spend putting to put hellcatsupercharger?

[@229Duke]

Beautiful

[@brandonrowland3]

Thank you