07-11 Camry Engine Replacement

Рет қаралды 23,672

Trent Orth

Күн бұрын

Пікірлер

@singhjobim9719 Жыл бұрын

Lots of hard work doesn't bother me; I can watch people do it for hours.

@yunielserrano5423 6 ай бұрын

boss, good video.. The engine I built was from 2012 to 2017, so did you have to change the cover? and the other additions fit well because in 2011 the PCV valve is below the engine...if you can tell me how you did it.thanks

@sivucit 10 ай бұрын

i have hard time aligning dowel pin from engine to transmission. Also seems like my flywheel is binding with torque converter. any tips will be helpful.

@fbzzzy 2 жыл бұрын

Good job! I noticed you didn't remove the windshield wiper panel for the extra space. Thinking about doing this by myself as well.

@TrentsOvertimeGarage Жыл бұрын

Good call

@420beatzzz 6 ай бұрын

Any tips on reattaching the flywheel to the torque converter those little 6 bolts seems impossible to get back in

@joelg6525 2 ай бұрын

Update on how the car is running?

@mmmkkk-i7m Жыл бұрын

Hello ! God Job ! and Where did you buy engine and how much is it and how much miles on this engine and they gave you any Car repot for proof engine miles Thanks for share this video

@TrentsOvertimeGarage Жыл бұрын

Salvage yards, or ebay...don't always have reports to prove it, so you have to trust them.

@elliotfrank119 6 ай бұрын

Great job how much would you charge for that? How much was the new engine?

@bigboyisaac255 3 ай бұрын

Hey! I’m seriously considering doing a “restoration” on my 2010 Toyota Camry (4 cylinder). It currently has 260,000 miles on it, and I plan on engine swapping it with a lower mileage engine as part of the restoration process along with some cosmetic work it needs. I wanted to know about how long did it take you to complete your engine swap?

@bobochan4699 5 ай бұрын

Peak through the internals of that used engine with endoscope to minimize bad purchase n better if they can provide compression readings for each cylinder.

@michaelmecham760 2 жыл бұрын

Do you know what years and vehicles I can search for a replacement for a 2009 Toyota Camry with the 2.4

@fbzzzy 2 жыл бұрын

Sounds like a 2az-fe engine.

@keywest181 2 жыл бұрын

I need the same engine for a 2007 Camry. How much should I be expecting to pay for the engine swap including labor?

@TrentsOvertimeGarage 2 жыл бұрын

Maybe $2k for a motor, $1k labor, and some for shop materials.

@car-toonnetwork7723 Жыл бұрын

@@TrentsOvertimeGarage 1k for labor is dream

@CornHugs Жыл бұрын

@@car-toonnetwork7723just get if done from a experienced mexican if you have somewhere they can do it they get the job done i have a guy that does 80 a hour and just a little extra for engines, he charged me 650 and i havent had issues

@aros007z 3 ай бұрын

Does he have to be Mexican?

@mauricio813 4 ай бұрын

Good job

@Aaron-yg1uy Жыл бұрын

Excuse me sr how tall is your lift? And what is the weight capacity?

@TrentsOvertimeGarage 10 ай бұрын

150” overall height, 10,000 lbs capacity

@greatnesstremonte7182 2 жыл бұрын

Does the motor have only 90 day warranty I need one can you recommend a good place to shop for one with low miles I have the 2.4

@TrentsOvertimeGarage 2 жыл бұрын

Check out ebay

@Obzrve 8 ай бұрын

Great work

@fbzzzy Жыл бұрын

What kind of sealant did you use to put the engine side cover back on?

@TrentsOvertimeGarage Жыл бұрын

Permatex ultra grey. The OEMs all have a version of it that is probably higher quality.

@dylano7242 Жыл бұрын

If need to replace a 2.4L, 2.5L, 2.7L get the scion 2.5L they are far cheaper than others just because came out of a scion. And YES THE 2.5L 2arfe CAN replace the pos 2.4L 2azfe and the very rare , expensive 2.7L 1arfe.

@jamesfin6039 Жыл бұрын

Can the 2.5 be fitted instead of the old 2.4 with no modifications? Thanks

@tony3z62 4 ай бұрын

Looks like the timing cover will have to be switched over. They are different and also the pcv valve location.