2022 YZ125. With only 20 hours it started having shifting issues. Lets see whats wrong! Donate Race Fuel link... www.paypal.com... Thanks for watching! upallnight91@hotmail.com
Пікірлер: 135
@patrickb.mxer21842 жыл бұрын
That's crazy. Yamaha seriously needs to address that. Nice work brother!
@UpAllNight912 жыл бұрын
Thanks. Yeah surely just 1mm longer on that spring tip and even that would have been enough.
@rwcasto2 жыл бұрын
Great content man! Soon as you starting describing the issue I new it was that detent. On the 2006 wr450 they used a bearing on the detent instead of a steel wheel and when the bearing goers the same thing happens- it will pop in and out of 2nd usually under a load and extremely hard to find neutral. My fix was to get rid of that bearing detent and go with one out of a YZ 450 with the YZ spring. Good news man- I got my bike back together using your case splitting trick- fired it up today after a full rebuild!
@UpAllNight912 жыл бұрын
Nice!!! Always a good feeling to hear that first start up!. Yeah I didnt guess that one right but now I know how they act when the detent is not working right. I think the 2014 yz450 had the same issue with the bearings coming apart on that and they went to a solid roller in 2015?
@deborahchesser73752 жыл бұрын
@@UpAllNight91 that first start is definitely a little nerve racking, especially after a rebuild. After a couple heat cycles I relax lol. Thanks for the vid brother.
@AUSTIN_4572 жыл бұрын
There's a recall on that spring now. Alot of people have had this issue
@joeb10p69 Жыл бұрын
no u
@fivefingerdiscounts Жыл бұрын
thankyou for the video, local dealers are saying 2 months to have this done so I can DIY it in a few days. thankyou!!!!
@UpAllNight91 Жыл бұрын
You can do it yourself in a couple hours honestly. It's not hard at all. Thanks for watching
@fivefingerdiscounts Жыл бұрын
Hah maybe for you. Put it all back together and now a really tinny/knocking exhaust note. Any ideas what it could be ?
@fivefingerdiscounts Жыл бұрын
Fixed it. Was power valve hinge thing not put on correctly. If anyone else runs into same problem !
@UpAllNight91 Жыл бұрын
@@fivefingerdiscounts good job figuring it out! As I was reading I though power valve. But you got it!
@kyleg1474 Жыл бұрын
Yamaha Issued a Recall a month after you posted this video. Bulletin # M2022-008R They have a updated spring design that fixes the issue. All applicable gaskets and seals are replaced during the repair. If anyone with a 22' YZ125 has this shifting issue please contact your local Yamaha dealer and have them get your recall parts ordered and a appointment made for the repair.
@keithalexander36 Жыл бұрын
Since Howard helped with the R&D a month before hand should yamaha send him a sticker kit to offset the repair cost and day cut short in the dirt?
@Chris-ep7eg2 жыл бұрын
Thx for video man! I just did mine and it shifts better and stronger. Hope it dont come out again. I only had 2 hrs on the bike and it happened
@UpAllNight912 жыл бұрын
Nice! Did you bend it like I did in the video? So far that one has held up well. I did hear yamaha is sending recall letters out on this. Nice to hear the video helped though
@Chris-ep7eg2 жыл бұрын
Yes i bent it to hook on the lip and it was tight.i got a recall letter also. If it happens again. I'll get one off an oem sight. But thanks again
@UpAllNight912 жыл бұрын
Yeah that's what I would do too
@jasonharmon70102 жыл бұрын
great video! My son bent his shift shaft and i was able to use this video as a reference to replace the shaft. everyone at the track told me i would have to split the case, which is something i have no problem doing, but i rather wait till after the season for something like that. the longest part of me replacing the shaft, is waiting for it to come in the mail.
@saltyd7908 Жыл бұрын
Im having somewhat of the same issue with my yz 125 I’m thinking it’s my shift shaft but I’m not 100 percent sure. Was your sons gear shifter really loose almost like it was stripped out ?
@WILLYMANFRAK2 жыл бұрын
I got a 2022 YZ 125 too but Yamaha sent me a letter about that issue.. they are stating that the spring is in fault and you can sent the bike to a nearby Yamaha dealer to cover that issue free of charge
@UpAllNight912 жыл бұрын
Oh man, wonder if the ower has gotten a letter. Will ask um to check his mail lol. I assumed they would get to a updated part quickly. Yamaha is usually good at that
@blaineguevara14352 жыл бұрын
I had this same issue. Tweaked the spring, put it back together and shifted fine for a while. Now it is messing up again. Shifting is supper notchy and doesn’t like to shift that great. Or stay in neutral. I’m about to sell the POS. It is screwing me up in races
@UpAllNight912 жыл бұрын
Crap man. That sucks
@jamesr627711 ай бұрын
What would you attribute not being able to shift into 5th gear. Every other gear seems to shift just fine but will not get into 5th. It's a 15 yz250. I know the video is a year old but figured I'd ask. Thank you for you work and the time you take to educate and help!
@UpAllNight9111 ай бұрын
Hello. Does it feel like it shifted into 5th but then acts like it's in neutral?
@jamesr627711 ай бұрын
@@UpAllNight91No it just wont shift into 5th. Unless i am losing my mind it should have a 5th gear
@UpAllNight9110 ай бұрын
Yes. Should have a 5th and a 6th. You might have to dig into the bottom end to see whats wrong. I would start by removing the clutch cover and checking the shift mechanism, if alls well then split the cases and check the transmission
@jamesr627710 ай бұрын
@@UpAllNight91 Thank you for taking time out of your day to respond! Much appreciated sir!
@UpAllNight9110 ай бұрын
Yes sir!
@nathanparrott603710 ай бұрын
Just subscribed! Great video. I have a 2020 yz125 and heard rattling while in neutral coming from the gearbox/primary gear area. Turns out the oil check bolt only holds 275 ml of oil and the reccomended amount is 660 ml. Any idea what was rattling in my Trans from low oil? Also carefule using check bolts for oil amounts on your yz 125 work Cheers
@UpAllNight9110 ай бұрын
Hello. Thanks! I too have found the oil check bolt is very low on the YZ125. I just pour in the proper amount of 660ml. The rattling was probably transmission gears. They can even squeal if the level is low. If everything sounds good and works good once the oil level is up at 660ml I would run her and just keep an eye on her for a little bit.
@Jake-rp9cv2 жыл бұрын
The worst part about the bike is the paint on the pipe!! I have over 200 hours on my yz 125 pipe (and whatever more the previous owner put on it) and it has just barely started to wear thru the paint in a 1inx1in part.
@chadrides9142 жыл бұрын
Nice work bud. My yz250 with 300 hours is just starting to get a little rough shifting and was thinking it might be detent …..
@UpAllNight912 жыл бұрын
At 300 hours I would at least replace the detent spring. They do ge old after a while. Or even do the shifting detent spring mod I covered in the yz250 full rebuild video. It surely helps with better quicker shifts
@RsGOD-if9rs2 жыл бұрын
hope you put that washer back on the shift shaft. cant tell ifs its on it or not but doesnt look like it :D my new yz125s arriving soon. thx 4 the insight into this problem
@UpAllNight912 жыл бұрын
I sure hope the washer is in there lol. Im pretty sure it is. I have a habit of sliding it on the shaft and later after all was back in I didnt see a washer on the towel so she should be ok lol.
@UpAllNight912 жыл бұрын
Hopefully your new one they already addressed that.
@RsGOD-if9rs2 жыл бұрын
yea hopefully, if not its a easy fix
@Jake-rp9cv2 жыл бұрын
Also, everyone is saying that this issue is very dumb, and I agree. But brands are struggling with QC at the moment. Look at KTM, they are recalling the CDI's because the weaker crankshafts and snapping and grenading.
@UpAllNight912 жыл бұрын
true
@daleintampa2 жыл бұрын
Sweet video. I know where my bike is going now for service 😁
@UpAllNight912 жыл бұрын
Crap, you got Keith too ya know. Your in good hands lol
@asdfg6528 Жыл бұрын
the rooster also wanna ride😆 great job man
@UpAllNight91 Жыл бұрын
Thanks 😆
@Huhuhuimss8 ай бұрын
I love the drill thing
@UpAllNight918 ай бұрын
😆🤣
@berlin35772 жыл бұрын
I was wondering if you have ever used a Full synthetic ATF I have for over 20 years In my two-stroke bikes and not One single clutch problem or anything else and great video !!
@UpAllNight912 жыл бұрын
Thanks! I have used it before. It works. It surely does help older or weaker clutch bite better. You can get good results with lots of different fluids in these gear boxes. I kinda just stick with shell rotella cause it's my shop supply and gets run in just about everything lol
@keithalexander362 жыл бұрын
put washer on back side too..to push spring closer to arm
@UpAllNight912 жыл бұрын
Yeah that might have worked too. Another commenter said Yamaha sent out a letter and will put in a updated spring for free
@techtipfromgaragechick137 ай бұрын
So I think mine is having this problem. Sometimes it’s fine other times it’s not. New shift shaft and lever, clutch all in spec nothing missing, new cable too. Today I was looking at it after this video and noticed it has a lot of up and down play before it actually shifts. Sometimes it works sometimes it don’t. Even with my hand off the bike. So thinking it’s a loose spring they are probably all from 2002 so definitely old. But would it be this one your messing with or the spring on the shift shaft? Or both? Or is there just really that much play. Talking .5 “ maybe 1” yz 125
@UpAllNight917 ай бұрын
What you are describing surely sounds like your shift detent spring either broke or became unlatched. I would surely remove the clutch cover and inspect all of that. I wouldnt even ride the bike again before checking it because it can cause transmission damage after a while. Its easy to remove the cover and take a look,
@tcoll12332 жыл бұрын
My 2022 has 8 hours on it. Had this issue within the first 2 hours, dealer "fixed it", got it back, rode an hour or so and realized the case was cracked from the inside out from something coming lose and being forced into the case from the inside, they "fixed" that, THEN, I changed the oil and it was silver with lots of metal in the oil, changed again and rode and it still has silver and magnetic fillings all in the oil, dealer says that's normal (it's not or it would of done that before they worked on it also but it didn't) and now they refuse to work on it even though they did not repair it properly under the warranty. I'm just going to ride it until the transmission seized I guess lol
@UpAllNight912 жыл бұрын
Dang man. That sucks. I mean some oil glitter is kinda normal while the transmission is breaking in but. I would at least run a drain plug magnet to catch it and keep track
@tcoll12332 жыл бұрын
@UpAllNight91 after changing the oil after 3 rides, each time I rode the oil looks much better, there are still fine metal but less so that might be good
@UpAllNight912 жыл бұрын
That's good. I would get a magnetic drain plug to help collect the normal shedding and also keep track
@chevybandicoot1048 Жыл бұрын
could this be the same reason my shfiting is funk on my yamaha r6? forgot the kickstand down and wacked it on the ground low speed. but the foot lever got stuck on the kickstand spring. so maybe?
@UpAllNight91 Жыл бұрын
oh man, thats hard to say. You will probably have to open that up and check it out.
@kobebierotte63229 ай бұрын
What can cause this spring to fall out? Could it fall out if you try to push the bike forward really hard while it is in gear and not in neutral??
@UpAllNight919 ай бұрын
There is really nothing the rider can do to make it pop out. It just does it on its own.
@southsidesundays68252 жыл бұрын
Hi awesome video, hope you can help I have recently rebuilt a 88kx80 on the bench it had all gears (casing off) now back together in the bike I only have 1st neural & 2nd but when selecting those gears the selector is stiff up and down once in gear the selector dose not spring back up? Could you shed some light on my issue? Thanks
@UpAllNight912 жыл бұрын
Hmm. I would start by removing the clutch cover and clutch and see why the level is not springing back at least. I would start there, hopefully the problem is just under the cover
@tonykentarena2935 Жыл бұрын
you left a bit of sand in the very bottom triangle
@UpAllNight91 Жыл бұрын
Oh man. Crap!
@bencnossen30826 ай бұрын
my bike runs fine but I have a false neutral when I hit 4th gear and my shift spring and detent are fine is it possible that I have a bent shift fork
@UpAllNight916 ай бұрын
If you hit false neutral in 4ths once in a blue moon it could just be from lazy shifting but if its happening all the time then its most likely worn dogs and cogs on that gear set. You would need to replace that gear set and fork, as well as inspect the shift drum for wear. I have a 2022 YZ125 transmission repair video up if you are interested check my videos. Part 1 is up now, part 2 will be up next week. It will help you with this repair.
@thatguyrides70722 ай бұрын
Hi, can it be coincidental that it pops out of place or does it only happend if a bolt or something loosen up?
@UpAllNight912 ай бұрын
It pops out because they didnt get it enough material to bite down good. The recalled spring fixes this.
@KrystianChrobok Жыл бұрын
I have the same issue with Yamaha xsr125 2022, unfortunately local dealer do not care about the warranty and trying to cash me for replacement, is there anybody with xsr125 with the same issue?
@UpAllNight91 Жыл бұрын
Dang bummer. I would call Yamaha USA, they will get that dealer in line
@Miguel278mx Жыл бұрын
good job man :)
@UpAllNight91 Жыл бұрын
Thanks brother!
@ramsey108_2 жыл бұрын
there’s a recall kit that everyone gets if you bought the 22 yz125
@UpAllNight912 жыл бұрын
The owner is going to call yamaha to see if they have a recall or whatever for this issue since some on here have been saying there is.
@nicholasshufelt86813 ай бұрын
I’ve got a 05 yz 250 complete rebuild new case and all bike ran great for a while and now first gear is getting jammed up I can’t see anything wrong got any pointers
@UpAllNight913 ай бұрын
Hello. What do you mean by jammed up? Does it get stuck in first gear or first gear does not work? Or?
@nicholasshufelt86813 ай бұрын
It shifts into 1st but starts making noise like something grinding all the other gears work fine once and awhile it will get stuck in 1 st
@nicholasshufelt86813 ай бұрын
The only thing I have found after taking the motor apart and split the case is a bent clutch cable adapter the part that threads into the clutch lever I’m wondering if that’s the problem I can back it out but can’t turn it in
@UpAllNight913 ай бұрын
@@nicholasshufelt8681 Ahh, so once you have it in 1st and its rolling, does 1st and all the gears work ok? its only when sitting at a dead stop and trying to get it into first gear it acts up? If thats the case that surely sounds like a clutch dragging issue, clutch cable not adjusted correctly, not pulling the clutch cable far enough in when the lever is pulled.
@nicholasshufelt86813 ай бұрын
@@UpAllNight91 it’s only in first when I hear the noise all the other gears work fine is there a number I can send you a few pictures
@user-ue3ku6qb3j7 ай бұрын
Can I reuse my top end gasgets if there in good shape?
@UpAllNight917 ай бұрын
I have before in a pinch, but its always suggested to use a new one of course.
@armandofrias9707 Жыл бұрын
My bike jerks in fifth gear. Is it a clutch failure or is it a transmission failure? only if you do it slowly it works fine
@UpAllNight91 Жыл бұрын
Thats not the clutch. Thats the gear failing to hold. It will jump out under power and snap back in. It has worn dogs and cogs on the gears. You will need to split the cases to repair that. If it had been a clutch it would be in every gear and not only 5th. Its a failing 5th gear
@armandofrias9707 Жыл бұрын
So only the fifth is replaced, not the entire transmission?
@armandofrias9707 Жыл бұрын
Thank you for your respond
@UpAllNight91 Жыл бұрын
@@armandofrias9707 you don't have to replace the whole transmission. What I do is I open the motor and only replace the parts that show wear or failure. This includes the gears, shift forks, and shift drum . Any c clip removed during the job should be replaced with a new one
@RubberDJ2 жыл бұрын
I haven’t read through all the comments yet but didn’t you forget a washer on that shifting rod on the left side down there that one that you had a hard time pulling out?
@UpAllNight912 жыл бұрын
You are not the first who asked this lol. I have a habit of putting the washer on the shift shaft as soon as I pull the washer off and I did that but just didn't cover it in the video. Plus all part where resting on a clean rag so I would have seen a washer on the rag after completing the job. So I'm pretty confident its in there. Good eye though !
@RubberDJ2 жыл бұрын
@@UpAllNight91 hey it’s super cool that you answered. Thanks and I think your video was top notch . I had not subscribed yet but I will now. While I’m thinking about it I’ll ask you this for a ballpark opinion I have this 93 YZ 125 that I bought it didn’t run it was a compression issue I found out so I put a new top end in. And while I’m no stranger two motors I’m a complete stranger to motorcycle engines. To my surprise the thing worked and it runs awesome but when I started to ride it I could only get to third gear and it would not shift any further. Shops in California are either outrageously priced or they seem to not be interested in doing the work if it is going to be involved like a transmission is. I mean I get it (deep motor work be it a motorcycle or an automotive anything from head gaskets to rod bearings cranks is a pain in the ass) from what I understand splitting cases sucksTwo shops told me I was screwed without looking into it just by trying to ride it- they claimed to try riding it . But both shops actually said they couldn’t get it to go into gear at all which just told me that they are lame. So moving on After running this thing up and down my street a couple times I was able to get it in the fourth and the fifth gear but not easily however it seems the higher the RPM the easier it did shift (meaning that if I had low RPMs I couldn’t get it from 3rd to 4th and definitely not 4th to 5th) that’s where I’m at now I have not reached sixth yet. Does that sound familiar at all ?have you heard of this problem?
@UpAllNight912 жыл бұрын
@@RubberDJ unfortunately a 1993 is not easy to find shops willing to dig deep for cheap. Parts are hard to find for a 1993 anymore and there is always a good chance rhe job could drag on with part searches and such. Some shops anymore won't work on a MX bike older than 10 years. But older bikes are rare and are cool. I would find someone who is good at working on them or give it a go for your and learn while in there. Thats how I learned
@dayromance99812 жыл бұрын
hey wassup man my yz450f 2020 started bogging when I hit power band can it be spark plug?I recently changed transmission oil
@UpAllNight912 жыл бұрын
Hello. It surely can be the plug. I would change that first and see. If that doesnt fix it then I would do a fuel pressure check. If that's good then I would check the throttle position sensor. If that's good then I would suspect a fuel injector
@livefreeandshred98182 жыл бұрын
2022…crazy it has shifting issues at 20 hrs
@UpAllNight912 жыл бұрын
Yeah I know. I was scratching my head I dont expect that from a new YZ. But anything happens and even Yamaha makes mistakes. Wouldn't be surprised to see a update at least by 2023 in that spring.
@darylsmioth19042 жыл бұрын
Its a whole new engine and a reason to stay away from first yr bikes/engines. It will be ironed out in 2023.
@nocluerc31645 ай бұрын
Did not put the washer back on bro
@UpAllNight915 ай бұрын
Yes I put the washer on the shift shaft off camera out of habit. So when I slide the shift shaft back in the motor the washer was already on it.
@revengeof13072 жыл бұрын
Im picking one up soon and Im afraid I will have this issue.. has The owner had any issues since?
@UpAllNight912 жыл бұрын
Its been good ever since. And just last week he got a letter for a recall on that spring. Claiming it comes unlatched and they will replace it with a different designed spring for free. It's been working good so hes not even sure if he will take it in for the recall or not
@DirtbikeDad2 жыл бұрын
Can you tell me the size of socket need for clutch basket nut
@UpAllNight912 жыл бұрын
Cant remember off hand but when I get home later I will check and let you know for sure
@DirtbikeDad2 жыл бұрын
@@UpAllNight91 thanks I appreciate it. Just want to have everything to tackle the job
@UpAllNight912 жыл бұрын
@@DirtbikeDad its a 27mm. Same size used to loosen rear axle to adjust chain
@DirtbikeDad2 жыл бұрын
@@UpAllNight91 thanks
@ericaxelson5632 Жыл бұрын
Where did the washer for the gear axle go? its not there when you put it together..
@UpAllNight91 Жыл бұрын
I had the wash already on the shift shaft.
@ericaxelson5632 Жыл бұрын
@@UpAllNight91 Nice! i didnt notice that.
@UpAllNight91 Жыл бұрын
@@ericaxelson5632 yes. I kinda left that out of the video on accident. Good eye though!
@jojokarli2 жыл бұрын
Wondering if you could help do you know weather a 2010. Yz250f rear spring fits a 2005 yz125🤙🏻
@UpAllNight912 жыл бұрын
Hello. The 2010 yz250f spring will fit and work on the 2005 yz125
@jojokarli2 жыл бұрын
@@UpAllNight91 thanks mate any new videos coming 🤙🏻
@UpAllNight912 жыл бұрын
Hello. Yes sir! Putting together thebSpex XC dome review. Just gotta finished editing. And then also a 2021 YZ450 full motor rebuild coming in about a good week
@DirtbikeDad2 жыл бұрын
What about on a 05 ?? Hard to get neutral and is kinda stiff from 1-2
@UpAllNight912 жыл бұрын
Hmm. I would follow the same and first remove the clutch cover and clutch and inspect the shift mechanism under there. If alls good then you may need to split the cases and dig deeper, but hopefully not
@cbh148 Жыл бұрын
Comment is 4 months old, but just in case you never did anything about it, the '05 was a new engine (first year aluminum frame) and it had a problematic shift stopper that used a ball bearing that would come apart. Same story for '06 models. I have an '05 and it still had the original shift stopper, and the bearing had already come apart before I bought it, and yes it was difficult to shift. They updated the shift stopper in '07 to no longer use a ball bearing. The rest of the engine was the same from '05-'21. It's only $18 shipped for the updated shift stopper, and you can't even buy the old style anymore. Part numbers: 1C3-18140-10-00 Shift stopper ($18 shipped) 1C3-15462-00-00 Right side crankcase cover gasket ($10 shipped) Very easy to change and only takes about an hour. I would flush it with fresh oil while I had the cover off, then tilt the bike over to dump out the fresh oil and any pieces that might still be in there. Mine still had ball bearing pieces in the oil when I disassembled everything, and I was lucky that none of the gears got damaged from any metal bits getting caught between teeth, but many people haven't been as lucky. Fingers crossed yours are a-ok.
@goshjillespie9042 жыл бұрын
Not one ounce of torque spec was used lol. Smack it with an impact call it good.
@UpAllNight912 жыл бұрын
Yeah man
@daveydave9884 Жыл бұрын
Hey bud. I am reassembling a yfz450 and having an issue with the clutch push bearing not touching pressure plate while clutch perch in rest position. I have all plates in , I’ve tried using the smaller friction plate with spring washers and also taking them out and using full plate instead. There is a gap between the push bearing and pressure plate. I replaced the push rod, ball bearing and throw out bearing. Anything I’m missing ??
@UpAllNight91 Жыл бұрын
Hello. Are you missing the hug ball bearing that goes in there. I did a video on this, here is a link and if you slide it to the 18 minute mark thats where I get into the clutch kzbin.info/www/bejne/i2ilZH2DhN5rqc0
@daveydave9884 Жыл бұрын
@@UpAllNight91 I have the ball bearing in there. I’m not sure but it may be an issue with the wiseco basket. The back side showed two illustrations, one uses the spring plate I call it that goes on first but the other one shows not using this. I don’t know but that may be why I have the gap issue. I need to see if that throw out bearing sits all the way back - bottoms out or if it’s suppose to stick out some. Mine bottoms out
@UpAllNight91 Жыл бұрын
@@daveydave9884 oh, yeah sometimes aftermarket parts can be tricky
@sawsapo89012 жыл бұрын
my one just make 50h never had that problem...
@linkinpiatak66692 жыл бұрын
never seen someone working on a 2022 with a black and decker drill and can't afford an impact😂
@brentbaker9542 жыл бұрын
Buddy literally used an air impact through the whole video...
@linkinpiatak66692 жыл бұрын
@@brentbaker954 buddy literally used a black and decker drill instead of an electric impact....
@brentbaker9542 жыл бұрын
@@linkinpiatak6669 he also used an air impact. Do you know what an air impact is?
@WestonSpicer8 ай бұрын
Who tf are you to say 10 hours is to long, how much money do you have bro, a bottle of oil is 10 dollars. I’ve gone 200 hours on stock clutch still works new changed oil 4 or 5 times. No need to change 10 hours unless your James stewart and have that kind of money. Come on man don’t harp on the dude for not having it like that
@UpAllNight918 ай бұрын
Really just depends on the rider. On my wifes YZ125 I can run the oil for 10 hours in her bike no problem. But on my YZ125 by 3 hours the oil is nasty dirty and surely due. It just depends on how hard the rider rides the bike and how heavy the clutch is used.