Рет қаралды 5,924
1/12 Motorcycle lift table
#Motorcyclemodel #garage #diorama
*Index
0:00 Prologue
00:29 Table Top
02:45 Wheel clamp
05:53 Lift Unit
09:25 Hydraulic cylinder
12:18 Hydraulic pump
14:26 Complete Photo
This is how to make a motorcycle lift table, which I sometimes get inquiries about.
Although there is no need to explain, a lift table is a Workbench on which a motorcycle can be placed and the table can be raised and lowered using hydraulic or electric power.
I have made three types of lift tables in the past, but this time I will show you how to make the most orthodox type of lift table.
If you display a motorcycle on a lift table, it will become a small garage diorama.
1/12 is dollhouse size, and the tools are commercially available, so you can easily make a small garage diorama.
If you are used to working with plastic boards, you can complete it in a day.
The dimensions are explained in the video, so if you are interested, please take a screenshot.
*I use many different types of pipes, but if you don't have them, please use whatever pipes are available.
Material
*Plastic board
2mm, 1mm, 0.5mm, 0.3mm
*Plastic round rod
5mm, 3mm, 2mm
*Plastic square rod
5mm, 3mm
*L-shaped plastic rod
3mm
*Hexagonal plastic rod
3mm
*Insect pin
The shaft is 0.5mm
*metal rod
1mm, 0.6mm
*Plastic pipe
Outer diameter 3mm x inner diameter 1.2mm
Outer diameter 4mm x inner diameter 2.2mm
Outer diameter 4mm x inner diameter 3.2mm
Outer diameter 4.5mm x inner diameter 3.7mm
Outer diameter 5mm x inner diameter 4.2mm
Outer diameter 5.5mm x inner diameter 4.7mm
*metal pipe
Inner diameter 2mm
Inner diameter 0.8mm
*O-ring
Inner diameter 2mm x outer diameter 5mm
Let's meet again.
Thank you all of you.