1/144 HGUC GM Sniper II (White Dingo Ver.) Review

[@oaktree8500]

"DAT ELBOW JOINT." -Kakarot197

[@oniarmoury]

Wow what an excellent kit! Did not expect the ground war stuff to come with it!

[@oniarmoury]

THIS, the Gm, and the Guncannon White dingo ver. got a re-issue!!!

[@TheRealTKTwilight]

I would gladly pay $30-40, if I could find it that cheap, but I'd have to be super lucky to find one at that price. Why, oh why, Bandai, did you have to make this an exclusive?

[@kakarot197]

In that case you should check AmiAmi's pre-owned section daily. It was on there like 1-2 weeks ago for about that price.

[@MrHalonoob117]

The gm heads always remind me of halo helmets

[@marilyndowning8801]

Halonoob 117 me to

[@chrisli663]

I asked my cousin who was living in Japan at the time to buy 2 of these for me when they announced this 4 (?) years ago. She's finally moving back to the States this week so she can mail it to me. I didn't even realize at the time this thing came with so many accessories. I thought it would just come with 2 sniper rifles, the 90mm machine gun, unique shield and the little hover tank. I'm ultra impressed! This is by far my favorite GM variant ever.

[@hyperiongm330]

Not gonna get much cheaper than the USD 40 range atm, but anything over the price amazon or Gundam planet are selling it for is absurd and should be ignored completely

[@Mecha82]

From all accessories that come with this kit I do like that awesome looking railgun most.

[@barrybb5409]

Bought one of these for 3,000 yen. Shipping cost 4,000 yen. $67 all in all after exchange. Now p bandai will probably reprint this kit since I bought it at such a price.

[@Heroduothecomedian]

It probably doesn't matter as old as this video is but none of the links work to buy it

[@chunghinsun5899]

The runner that contain the hover truck parts also include the GM head and the railgun. That runner was reused from the 8th MS team Ground set which is why there's the railgun and GM head. I too got it just for the Sniper 2 and the hover truck but was surprised with left over parts. Bandai was lazy so they just give you the whole runner. The runner where they give you the machinegun was part of the Ground Gundam but the only part you were meant to get was the machinegun. So lots of wasted parts like the leg and knee joints where included. They did exactly that too with the White Dingo GM/Guncannon set. That set was nice that they give you a small runner which contrain the visor for the Guncannon but made translucent instead of solid grey, which the original Guncannon had and needed a sticker for the visor.

[@pioltjose23]

well kakarot how does it feel to loose your mobile suits head on the first combat mission.

[@Ray199149]

How about using a third party clear pink part for the scope of the sniper rifle? E.g. Wave ?

[@herlianasusanto7247]

everything you reviewed looks so solid

[@zeon_zaku]

If you would like a tip, if you don't know already, then it is helpful to sand the area where you put the sticker. I do that with mine.

[@MrHalonoob117]

Ill have to remember that thanks!

[@zeon_zaku]

+Halonoob 117 no problem :D

[@xiaz5620]

Lucky that you got one! Also, what software do you use for your vids?

[@kakarot197]

Cass Maritime Only the best, most expensive, most exclusive software that money can buy!!! ....Windows Movie Maker......

[@xiaz5620]

Love that sarcasm! Thanks!

[@Arrowdodger]

man, you lucked out! also, man, I want that ground war set, since railguns, fuck yeah!

[@SeekerLancer]

I want the White Dingo kits so badly.

[@JunkyardGod]

Just built the MG version today 🤘

[@WatcherMovie008]

Kak, plz convince me to buy the GM Sniper II (White Dingo ver.), regardless if I get it from eBay, Amiami, Plamoya, or HLJ.

[@RagingRobo]

on amazon is 50 bucks free shipping

[@claxs11]

Looks like he'd go well with an ez8

[@DarkSoulColonelEcho]

If I may ask, what are the dimensions of the vulcan pod? (Ie, back side height, width, etc.) I am trying to create one for my GM Sniper II Custom (basically a slightly modded K9), but I don't want to take it if the White Dingo version (I also don't have $50 to spare).

[@dicksonluiakitperday2532]

Luckily i am from HK I got this guy for HKD 160 which is like USD 20.

[@supergeno128ds]

Yeah... if this had been a normal release I would have bought THREE of them. I'll just have to make do with my single WD GM Sniper II.

[@FighterDoken]

Is your voice OK?

[@Arrowdodger]

Watching this again for the hell of it, but am I right in guessing that this is your favorite GM kit? or did the GM Sniper K9 beat it out?

[@kakarot197]

It's the K9 now(with the normal backpack of course). The colourscheme, the accessories,... As far as unmodded kits go of course =P

[@Arrowdodger]

***** Awesome. Still wish this was retail, but that is some consolation that I can still buy one of the best easily.

[@le3zh]

So far the pre-owened item u get from ami ami got any deflect?

[@le3zh]

Thank for the information, i will try it next time =)

[@ZombryaTheDark]

when does the mg come out?

[@dcfan4life40]

JUST AWESOME!!!

[@thantosac01]

it's worth to pay a lil bit more getting those unique gears. Those are rare

[@friedtofu4568]

Issa patlabor!

[@MinhPham-kb4mv]

Why is this kit so rare? Where did you get it?

[@kakarot197]

Because it could only be purchased from Bandai's website for a limited time and only people from Japan(and possibly a few other Asian countries) could order it. I was able to get mine from AmiAmi's pre-owned section. Genteikits currently has it on pre-order.

[@MinhPham-kb4mv]

What would be the best place to get model kits fro a cheap price including shipping? I am looking around for about 20 for 1/144 kits. Where do you usually order from? I am looking at the 1999 store and they have some fro pretty cheap.

[@kakarot197]

Minh Pham 1999 is a good website. I buy most of my stuff from HLJ and AmiAmi. They're both a bit cheaper than 1999. AmiAmi is the cheapest one but HLJ offers FedEX shipping and has a more streamlined ordering process(which is why I usually go for them)

[@MinhPham-kb4mv]

Thanks man!

[@MinhPham-kb4mv]

Is this a good kit? www.1999.co.jp/eng/10051946 I was thinking about getting this kit. I saw some reviews, but they were not very helpful to me. Does it have good articulation.

[@impulse131290]

in here this kit price now almost $50 @_@

[@hyperiongm330]

Suryawan Pranata Suryawan *Insert Gabe Newell Quote about being worth the wait here*

[@unkodion8085]

on amazon, u can get the white dingo gm and gncannon for the same price, boy the decisions(ಗдಗ)

[@oniarmoury]

...and I thought the Zaku and Gundam Ground War Sets were a steal.

[@datto240z]

woah wtf! RAILGUN!?

[@marilyndowning8801]

Cool 😎

[@hyperiongm330]

***** Is 43.28 USD a decent price for this, because I aint finding anything cheaper aside from the Gundam Planet One and that has $9 shipping at the cheapest, so yeah, I really want this as I am a huge Fan on the Sniper II. If not I'll just think about buying a Strike Witches Figma.

[@kakarot197]

HyperionGM short and sweet: NOwhy? This: www.genteikits.com/scale/144/hguc-sniperdingo Tell your wallet I said hi.

[@hyperiongm330]

***** the default shipping was more than the kit's price, I found the SAL button tho, thanks for the link BTW, and once again, its paypal, and I forgot my password for it. EDIT: I solved the problem and have ordered the kit

[@hyperiongm330]

***** Now my Card is giving me problems because its a Google Wallet MasterCard. And the site only accepts paypal

[@thedrofpeppers396]

snoipah

[@Azrel00]

Thats alot of weapons o.O

[@lostonessoul8435]

OMG IFLIPINGNEEDTHISINMYLIFE.

[@Thunder_unit00]

I really hate watching how you handle gunpla