1/64 RC Pocket Drift Frame Kit DIY (TLS1001)

[@TLSGarage]

For everyone outside the US; As soon as I restock I will be working on making this frame available with worldwide shipping!

[@R-EVLMNKY]

How much for the kit? AZ shipping address. Thanks.

[@petioleyu]

just checked the website. Sold out too fast! Looking forward to the restock!

[@Mister_Sanjey]

Oh thank you that would be really nice, I'm in Belgium

[@jonathanquick8388]

Heck yeah

[@jasonvandermeeren6345]

do you sell all the parts also ? not only the kit i want a full buldebole kit

[@captaingti]

i dont have time to build one of these but would buy one if it was already set up. something to think about. i am sure a lot of people are in my same boat. love it bro!

[@nicktrills]

1000% would purchase a completed one

[@PBK.london]

Turbo rc make a ready to run skyline

[@matteogalafassi3273]

I do have the time The thing i lack is the patience

[@CATech1138]

current ultra low production and high quality would cost about $300 each...just the parts for me to make one car cost $100

[@CATech1138]

Hots Wheels has an RC version on sale...just saw them for the first time today....single color plastic body with reasonable detail and a two joy stick controller.....for $25

[@Justin90Sawyer]

I've found that small thin zip ties have just the right flex to make leaf springs. The preload can be adjusted by sanding the zip thinner or use a couple for slightly heavier models. It also twists. Could be awesome for ratrods.

[@GundamDroid]

Dam you’re living my dream making RC conversion kits for the people

[@Justin90Sawyer]

Thank you for your hard work in making this available. I long to make micro rat rods someday. This could be a step in the right direction for me. Thank you, I like the C hubs could easly be applied to any frame design.

[@timothypoblete8376]

This is awesome bro. Thank you for sharing your builds !

[@RCRoads]

Nice job. You need a steady hand and hawk eye vision to work on such a small car. It's an absolutely super cool setup. Great job! 🏆

[@kilroy_4wlc]

that is beautiful

[@IamcountachYT]

Too bad it's us shipping only, also, I dare you to modify hot wheels mario kart

[@TLSGarage]

Yeah, hopefully that changes soon. I definitely want to make things available to everyone ASAP!

[@friedls]

@@TLSGarage That would be great! Awesome work again!

[@bobbobkinz9958]

​@@TLSGarage this is actual art please hurry up and make it worldwide!

[@razorbladerc]

1/64 scale monster jam truck would be epic !!!

[@unorthdoxcleric6953]

Finally been waiting 3 years for a kit like this. I better Order 3 as I'll probably break 2 trying to make it.

[@julienARcalifornia]

This is awesome, I was looking for an alternative to Turbo Racing 1/64. Im definitely going to build one of these. Coming from 1/28th (mini-z) I’m more interested in track racing than drifting but I’ll definitely give it a go.

[@JaiwalWankhade-jr3vt]

Your hand is just like me😊

[@dutchloveRC]

GREAT Build

[@Tongue123able]

i like that this fits in a non-widebody

[@muffen100]

Dam I just stumbled upon this but I think I may have a new hobby 😮

[@sergiomencos2005]

Uuffff bro That is amazing super amazing

[@ebonwestbrook5580]

Wondering when we might get a near complete rc kit instead of just the chassis..(just add vehicle of choice) Maybe even a few different size variants in chassis for larger 1/64 trucks and vehicles. 4x4, dual motor setup, Semi truck etc

[@nickalderman5943]

this is super cool! Please tell me carbon fiber chassis and RTR versions are planned for the future.

[@TLSGarage]

The carbon fiber would be awesome, Good idea!

[@speedtrap420]

Freaking awesome!

[@heavycartmedia]

My hands cramping up watching this. Awesome tho

[@AimingTowardsBetter-o5z]

That remote controller looking kinda handy.

[@Bluespade115]

Awesome Work!

[@NikosKaloudis-dk3vn]

So clean .Nice👌🏻

[@jonathanardon2712]

Woooooooow so great

[@slykidman]

Just gonna get one of my longtime online friends to ship 3 to me in canade ,^_^ im getting on the bandwagon, Hot wheels rc's let's gooo

[@twinkylebinky9749]

You are really talented, i am looking all your videos 😂

[@vincentwong3306]

Very nice, seems can be a competitor of the "Turbo Racing" micro RC car...😺

[@diyfireking]

This is amazing. Can't wait the next video.

[@bamby3144]

Amazing video too!!

[@pigasus7527]

Great job as always!

[@lefrancoisjeanpierre3098]

Waou j adore bravo c est tellement propre

[@bamby3144]

Just bought one, been waiting for thissss

[@mudswamp3334]

This is amazing. I wish it was made of aluminum, but 3d printing seems to have done well here. This is awesome. The cost is more than fair as well.

[@TLSGarage]

Aluminum isn’t a good option because it can cause shorts in the wiring and such, and most people will be cramming a lot of wiring in there pressed up against it. I saw someone mention carbon fiber though; definitely something I’m going to look into!

[@mudswamp3334]

@@TLSGarage that makes a ton of sense. The aluminum could be painted to negate that effect. Carbon fiber would be super cool.

[@bastija6058]

doesn't carbon conduct the same?

[@dracotales]

@@bastija6058 carbon fiber is made up of layers of carbon and glue, it's way less conductive due to the closed surface

[@drcustom_id]

Wowwwwwww niceeee job bro , u are amazing 😁👍👍👍👍👍🔥🔥🔥🔥🔥

[@rodrigogomes5104]

Cara parabéns pelo seu trabalho com miniaturas cem igual 👏👏👏👏👏👏👏👏💅👏👏👏👏

[@emanh4keem_san420]

now thats PREMIUM

[@dgaragediecast]

Nice job!

[@reezo.2382]

THAT WOULD BE AMAZING IM IN SOUTH AFRICA

[@mariagloriazoppi5045]

Fantastico lavoro,grande👏👏👏👏👏👌👍

[@kucingkeren8042]

Thank you for the tutorial bro, i love your video

[@DeclanJames-n8y]

Should make shipping everywhere and make more rc bases hahaha

[@Helena0502]

Super!🔥👍

[@kendrickh91]

I just had to sub😮😮. Nice work.

[@RobertXavier-kl8bj]

Great Step by Step Close Up Video Impressive Finished Product How much did this project cost? Not including KZbin, just the parts, tools, build time? Thanks

[@malwadao]

perfect egenering

[@BladerRyu]

That's so cool! I used the same s14 body to make my rc car and it was pretty cool to see a different way to do it 🫡

[@tristinwilson4679]

When are you gonna restock? Love that you made kits! Keep up the work

[@LamarDavis187]

pura dedicación finesa en una sola pieza que expresa la belleza . sigue así eres muy talentoso

[@kirk5452]

You really outdone it with this design and price! Just worried that all my resin parts for 1/64 got dry brittle and rigid. I have basically the same design and they always dry out and break after a few months. What resin are you using?

[@ipanders9180]

now you need to make one that has adjustable suspension, headlights, AND a spark in the exhaust. (maybe a version of the flint from lighters, with a motor on it that you can control separately. each press of the button rotates the motor which sparks the flint in the rear? creating an exhaust flame effect???) maybe

[@joelreyes4886]

I would love to build a drifting mail truck 😂

[@joelreyes4886]

YOU BUILT ONE YOU MAD MAN!!!!! I LOVE IT BRAVO

[@GebialekFoy]

Woah 😮 I need one ❤

[@WATCHMEGOBROKE]

Thats amazing and it has a gyro 😮

[@adamcfpv5372]

need to restock im getting like 15 of them

[@0Ninja0Dude0]

Sick!!!!!

[@wolfiecrawlsrc58]

If only hex hardware were used. Will look forward to it going worldwide.

[@jamesblair3047]

Cool.....im thinking of doing one....were did you get the wheels....?

[@taylorjudd950]

If you put together a whole diy kit out including motor and the receiver and what not and I'll buy it instantly

[@ruben1368]

Can you put the links where you bought the engine, receiver, servo…?

[@Mrturbocorona]

Would be keen if you did it as a full bundle with electronics aswell and shipped to Australia

[@fahrinurakbar7384]

Wow .. I want to buy

[@hacksaw.]

i wish i could make a miata one of these but i dont have the time and money to make one i wish you could sell complete models but amazing job

[@ryurc3033]

So yeah, after looking thru a few comments, I think it's fair to say you may have underestimated the market for such a thing. Will be following closely for restock.....

[@TLSGarage]

Yeah… I had enough materials to make a decent amount of kits, but that sold in like 1 hour so now in waiting on more materials… hopefully this week!

[@ripwreckraceway]

cool i love it man id love to get three of them from yah bro please

[@s42mont]

Da hora 👊😎 #s42mont

[@RossPotts]

@TLSGarage. Boy, that thumbnail makes it look like it wouldn’t take much to give it the body of a 34 Ford Coupe

[@robertocolon8728]

Do you have links to the electrics for this build?! I'm definitely doing this build! Thank you and great work as always

[@ElectronicMax88]

@tlsgarage when are you re stocking the frame kit! I'd like to order even it's backordered! Get me in line!!!!

[@gee-ees584]

I'll be buying a couple if you can ship int'l 🤙

[@KniteRLS]

Bro I wish u sold the whole thing like motor and esc's and stuff I deff buy one

[@aysegulceylan8570]

İ subscribed and liked btw

[@Solo_endo]

Cant wait to get one 😅 🕐

[@dankforest]

Hot wheels started making these new monster trucks. Can you do a vid where you make up one of those and motorize it please. Great vid btw, been getting into micro recently.

[@easy_3d]

When the new stock of frame kit will be available? Im from India and i want to buy your frame kit ❤

[@jaselowell3878]

I’ve found all the parts throughout Ali express and Amazon with your frame and I was very surprised that it costs almost $200 for 1 build

[@50bullcrap54]

Maybe they are drop shipping. I feel like if you really wanted to build it you could find the parts selling from the original website/creator

[@j.mateus8775]

Hello friend, I love your videos they are great. I have a Dumborc control with a X6FG mini receiver. Do you know if the connections would be the same? I would appreciate your help.

[@TT_5_6]

You should make a lifted rc truck

[@JohnFlores-sf6em]

Can u show a video of putting a 1/76 turbo racing drift car model onto ur DIY Frame kit

[@fishxfryed945]

Chould this somehow work using the screws on a custom hot wheels love this frame its everything I been needing under a mini rc

[@makestuffbetter19]

Does it drift well? You may have just started an awesome trend!

[@jamestani3450]

You ever sell completed kits?

[@Mika-fv3uw]

Currently making my 4th versoin with real carbon fiber frame. Designed a frame kinda like the one in the fid then copied it onto carbon fiber

[@dr1view]

So amazing RC kit, how can i get this cool item? Gonna make my hot wheels batmobile become RC

[@paulinojusaino9335]

When will you be restocking? Ive been trynna build one of these for the longest now 🔥

[@lanced11ov]

It may sound like a lot but being that I don’t have any kind of tools to help me make that myself I’d rather pay extra to have the whole kit and wiring pre-made for me as it would be way over my budget to go and buy all the little tools I need to then make the kit

[@ZanyZ_zzz]

Great video! Might start planning my first build now! How would you recommend installing/securing the motors in place?

[@TLSGarage]

Ive literally only used superglue throughout almost all of my builds haha. Just a small dot will work, and that way you can pop things back off if needed.

[@alphabet-tt8yh]

I have 2 questions. 1. Will this be available as a pre assembled kit with the electronics installed but no body? 2. Will there be stronger chassis options in the future? I would buy it fully assembled with electronics and a more durable chassis.

[@TLSGarage]

I will not sell it with electronics due to FCC restrictions; Stronger chassis is coming within a week!

[@alphabet-tt8yh]

@@TLSGarage oh ok. Will consider getting!

[@pikmiin]

First comment here!!

[@crecio1827]

Hey TLS, quick question! How do you get the models to move gently without having stutters? Like coming out of a parking spot or coming off from a red light. if this makes sense.

[@zanehill2772]

How long is the battery life? Love the vid!

[@Steven-p7q2l]

Where I can buy all of this stuff for RC drifting car that much small on the site.

[@dblnaknak]

Spent 2 hours searching for parts. Can you please link where you purchased the parts from to complete the kit.

[@Rich77UK]

As parts wont ship outside of the USA...can you give specifica on the motors and gears???

[@daviddetweiler7658]

Cool build. Could you have used a screw for the front wheels instead to simply screw in and set the gap for a free spin?

[@Deathsaw2.0]

Does this work on all hot wheels models, for example if I want to make a Lamborghini become a rc car will it work?

[@Risky_crew]

If I already have a turbo racing 1:64 could I swap everything over to this frame? 🤔

[@Gangsterrr_yyyV2]

Hello im from Poland and what you use application to ocnnect and im have a xiao esp32 c3

[@Nick1nong]

when will you be back in stock?

[@vid4033]

when can I even buy the frame like how long should we wait