1/8 Scale Christian Hosoi Skateboard - (PART 3) Breaking The Mold, Shaping, And Finishing

  Рет қаралды 6,062

Punk Fingerboards

Punk Fingerboards

Күн бұрын

Пікірлер: 19
@Dyl-XL
@Dyl-XL 2 жыл бұрын
Is there any instructions on how to make a router table set up for shaping? I have a router but don't know how to make a table
@rconcha3
@rconcha3 5 жыл бұрын
This is great. Is the HOSOI mold available to purchase? Thanks.
@punkfingerboards6283
@punkfingerboards6283 5 жыл бұрын
Thank you very much. We plan on offering old school shaped molds very soon, including the Hammerhead, Powell Ripper, Caballero Chinese Dragon, Original Tony Hawk Pro Model, as well as a few popular old school Santa Cruz shapes like The Stinger, Roskopp, and Kendall. That was the original intent of this company all along, to make collector quality replica 1/8 scale skateboards and supplies. The company has been blowing up recently on contemporary fingerboard shapes though, which is nice. We are frantically working to keep up with the increased demand of our products available online. 16-20 hours days, no sleep, lots of coffee, and way less sessions at the skatepark :(...The scope of this project is huge, as we do everything in house, from concept to completion. You can expect our old school molds to be available for purchase sometime in early June, and hopefully direct from our new website which is under construction as well. Our next video will be the documented construction of a carbon fiber insert pro model that we are really excited about, it's an exceptional fingerboard deck and we hope a must have for all pro boarders. Thanks for watching and stay tuned!
@michaeldantemachado
@michaeldantemachado 4 жыл бұрын
Hey I’m thinking of making a fingerboard company and I buy stuff from you a lot and I was wondering if you can sponsor me for your truck and bearing wheels since I can’t make those and I like all your videos
@1lunifyd
@1lunifyd 5 жыл бұрын
How much for the board he just made? Excellent job well done!
@EEE-cd3yc
@EEE-cd3yc 4 жыл бұрын
How do I get a graphic on the veneer with a way that is affordable
@jonniekatt
@jonniekatt 2 жыл бұрын
Bad ass
@alejandrodiaz031
@alejandrodiaz031 4 жыл бұрын
What kind of paper do you put on top of both parts of the table to protect the mold?
@punkfingerboards6283
@punkfingerboards6283 4 жыл бұрын
Can you clarify your question? If you're referring to the step after gluing and placing the veneer in the mold (kzbin.info/www/bejne/mImxmXuLpdehmdE 3:07), it is Hobby Lobby foam sheet (www.hobbylobby.com/Crafts-Hobbies/Basic-Crafts/Craft-Foam/Foam-Sheet---12-x-18/p/EF50100) cut to size and wax paper. Hope that helps!
@alejandrodiaz031
@alejandrodiaz031 4 жыл бұрын
@@punkfingerboards6283 I was referring to the wax paper, thank you very much for your answer, I had no idea what it was called !! 😂
@pohadkove6786
@pohadkove6786 5 жыл бұрын
I’m thinking of buying my first mold what should I get?
@punkfingerboards6283
@punkfingerboards6283 5 жыл бұрын
Can't go wrong with: www.ebay.com/itm/303137353942 Our best seller, over 70 sold. Buy with confidence, 100% positive feedback, eBay Power Seller. We are about to offer templates for our molds using YOUR own hand drawn shapes! Follow on Instagram for updates on this @punkfingerboards.
@progressivedemocrat4615
@progressivedemocrat4615 4 жыл бұрын
what bit do you use with the router?
@punkfingerboards6283
@punkfingerboards6283 4 жыл бұрын
I use a bottom bearing flush trim bit.
@progressivedemocrat4615
@progressivedemocrat4615 4 жыл бұрын
@@punkfingerboards6283 thanks
@geovanosatrio839
@geovanosatrio839 7 ай бұрын
what size bottom bearing flush trim bit do u use
@punkfingerboards6283
@punkfingerboards6283 6 ай бұрын
@@geovanosatrio839 Using 1/2" bit, 1" length with 1/4" shank.
@punkfingerboards6283
@punkfingerboards6283 5 жыл бұрын
This mold is being sold as a complete fingerboard kit: www.ebay.com/itm/Old-School-Fingerboard-Complete-Mold-Kit-Graphic-Veneer-Trucks-Wheels-Extras/303159820674 The included high resolution printed veneer in this kit can produce extremely authentic 1/8 scale replica skateboards...but, keep in mind even with video detailing the construction, we consider this an advanced woodworking kit and some experience with measuring, centering, gluing, cutting, drilling, sanding, and finishing is suggested for best results. More SICK old school shaped templates and matching graphic veneer for this mold coming soon!
@split_finger_boards797
@split_finger_boards797 3 жыл бұрын
What router do you use?
Pressing a Rock Maple Skateboard with a Dirt Cheap DIY Mold
13:04
How This Guy Mastered Fingerboarding | Obsessed | WIRED
9:54
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН
Do Fingerboarders Really Need Foam Grip Tape?
5:59
Jack Perry
Рет қаралды 74 М.
I Made the Same Game in 8 Engines
12:34
Emeral
Рет қаралды 4,3 МЛН
I finished the Nerf Nuke!!
24:14
Joel Creates
Рет қаралды 726 М.
I Built 9 Satisfying Ball Machines
16:06
Engineezy
Рет қаралды 268 М.
Dear Game Developers, Stop Messing This Up!
22:19
Jonas Tyroller
Рет қаралды 764 М.
Kamelpro Fingerboards : How It's Done
8:22
Finger Benh
Рет қаралды 22 М.
FlatFace Welcomes Ian Mulet
8:47
MikeSchneider
Рет қаралды 38 М.
Como Fazer um DECK de Fingerboard Profissional | Tutorial
11:05
Grove Skateboard
Рет қаралды 314 М.