1-CLICK Fuel Power in Satisfactory!

[@Yakez42]

Link to the blueprint pack: drive.google.com/file/d/1F_2XWc1CTBPXQ4lcw0rbPKJaIfyMF8gE/view?usp=sharing Updated version of diluted fuel power and rubber + plastic prints: kzbin.info/www/bejne/nYmYmYefnaxlfbc

[@nickjohnson9640]

These videos are amazing tools. Not just for learning how to utilize blueprints more effectively, but also because it is nice to get a window into other Engineer’s heads about how they go about planning in general

[@Yakez42]

Whoop! I need to tell my Mom that people on internet call me an Engineer xD

[@euphorik000]

thank you so much for these blueprints! I just finished a huge aluminum factory, but didn't calculate the power requirements correctly like a noob xD and i'm def not ready yet for nuclear. huge thanks, these will get me back up in not time!!

[@NicolasThery1]

Last comment because even if I have a lot of questions I really enjoy your work (I think v1.0 hasn't yet the mods that allows you to have so few clearance between buildings) There are adjustments in production in 1.0. I'm using the baby fuel blueprint : You have to change the overclocks in 1.0 Crude Oil reffinery can now be set to 100% which is 30 per minute, so you can stack now 10 of them with mk1 pipes Heavy Oil reffinery can be downscaled to 66.6667% Fuel Generator can be overclocked at only 133.32% (not more) : It saves you a power shard :D You can adjust the label signs to : - 300 MWh battery (ming the h for hour, which means you have 300 MW for 1 hour when switched to backup ... maybe add a fourth one ? ) - 333 MW Power - 30 Oil - 20 Resin residue Hope there is no mistake on my adjustments, hope this helps :D

[@Homarid1]

Great work. Thank you for the blueprint. I made the big version in my world, and just one oil node is probably going to carry me into nuclear. The packager loop is pretty clever. I really liked how it didn't need tier 7/8.

[@Yakez42]

Nice to hear that xD

[@Iceflarereviews]

Guys the "Advanced Power" is still viable. All you have to do is tweak a few things. I'd recommend importing the blueprint into your planer and making these changes then updating it. Set the Water and fuel packagers to 50 (up from 30) Set the Heavy oil to 25 (up from 15) and set the diluted fuel to 50 (up from 30) This is still an awesome way to make power. You just need a LOT more water now. The new setup will be: 18.75 Oil in 50 Water in You can chain 16 together for a single 300 oil pipe. Unfortunately it will take 800 water now. (you'll need a 300 water pipe every 6 plants) You'll end up with 100 extra water (just underclock a pump or overclock a few.) Keep in mind you'll be producing more Polymer Resin now too (12.5 each). 200 per 16 If you're combining both lines, you'll need a Mark 4 belt. Thanks for the awesome blueprints Yakez!

[@Beeeazybones]

Thank you so much for posting your blueprints. Your designs are AWESOME!

[@MrJFlipflop]

These blueprints are a godsent! But first about the video, again very well made and funny. Good editing. I was entertained, informed and I got also new blueprints from the master himself to test & inspire. 10/10. I am working on a turbofuel setup and juuust run out of power. I was not motivated anymore. But now, with these blueprints, I can just slap them down, connect everything, and have enough power until my own setup is done. I already checked the blueprints out, similar to the HMF one, must be so timeconsuming to figure this all out in these perfection functually and then also design them in a unique neat way. You are on another level my friend.

[@Yakez42]

Nice! Considering the time spend. Well I consider it more as Satisfactory core gameplay now. At least for me it is a nice puzzle to crack xD So even if 1 blueprint takes like 4 hours to make it still a win for me.

[@legenddave6173]

Roses are red Violets are blue Your blueprints are mindblowing My Sub is for you (Literally, you are a genius.)

[@mrpmurphy]

TIL you can "overclock" signs... my life has been changed

[@andrewschort724]

Trying to comprehend this has made me insane. How do I explain it to a therapist?

[@Lockgistan2023]

I wish u would show how u made the advanced fuel setup blueprint and how u make it all fit in such a small space. I'm so nub at blueprint. Other the that i love your channel it gave me so many tip tricks ty so much... Much love to you....

[@mmmnnvnm]

Keep in mind, 1.0 increased fuel consumption from 12 -> 20/m. I've not looked at the BP but I'd assume there is some refactoring needed to optimize this BP stack.

[@Yakez42]

Tyty for the heads up!

[@rasmushansen6448]

Still works, you just have to remove 2 power shards from fuel-powered generator, so it only outputs 150% (375MW each).

[@RiftWalkerIX]

@@rasmushansen6448 You can build exactly 16 with 300 oil, adjust the internal machines to 62.5% for the refinery, 83.33333333% for all others, then run generator at 250%

[@seafood_hater]

Great video. I love your design! Your video inspired me to play Satisfactory again. :)

[@Yakez42]

nice! xD

[@johnsteele3791]

Loved the Blueprints it crams into blueprint of what I built on 30 oil using way to much room and time. this build is the same concept but in nice bite size chunks and MASSIVE savings on time. Is the fuel generator, being over clocked with 3 power shards, a left over from the basic version? Its running at 60%, So 1 works, took the 2 extra out to use else where. also an odd thing deleting the blueprint and rebuilding I lost 5 computers and 15 stators. odd but easily replaced

[@joshuadelaughter]

Blueprints aren't OP, you're OP. 😆

[@ikee2000]

They seem to have changed how the Blueprint Designer handles clearance and collision, so it doesn't seem to be possible to make this in 1.0, at least not with the blueprint designer mk1. At least we got the Mk2 where this will be possible.

[@Yakez42]

Yep there have been some changes. Assemblers are now pain. At least we have 5x5 to "fix" old blueprints now x)

[@ikee2000]

@@Yakez42 I am looking forward to whatever magical blueprints you will conjure up with 1.0, this series is the reason I can endure this game again haha! One nice thing I did with the 5x5 is to recreate this one, but I used the extra height to clip power storage through the roof, so they stick out, kind of like the brutalism-roofs. Functional and prettier!

[@Wishler30]

like the vids m8 keep them comming plz learn a lot!!

[@jacobbalcer3329]

I struggled soooo much trying to get the 346mw schematic working. Strong recommendation, climb on top of the refiner making heavy oil residue and polymer resin and put a valve on the water pipe and limit it to 30m3 per minute. (Make sure it's facing the right direction). I spent so long removing and re-placing the mk 1 pipes down because the water bottler wasn't keeping up and it was shutting down my generators. Idk if I did something wrong I have a mk2 pump at the start but for some reason only my last few would fill with water the rest would shut off constantly, once I placed the valve it fixed. Not sure what I did wrong but, if you haven't built these yet I'd fix the schematic and resale it first. Loads easier. Using the 10 of these with a train to bring water and oil in to the location since it requires so little as my back-up power at my storage base/train hub.

[@ongoy13]

Do you have a tips for putting water pump in blueprints ?

[@bragilbe12]

Should be said: your PC wont have a "blueprint" folder in your localappdata unless you have already saved a blueprint in-game

[@NicolasThery1]

and for the blueprint usage, what do you mean by "Make sure to align them on the clock" (I looked into it and fluids pipes weren't full, I had to stop machines until pipes are full and then let them go, is something about that ?

[@NicolasThery1]

Hi @Yakez42, I'm trying to make this blueprint on my own on v1 I can download and load your blue print (as a model) and I try to make my own on another blueprint builder. My problem is about clearance, I can't stack 2 refinery as you did, giving it space around for pipes and belts, did you build blueprints from the game or by hacking into the blueprints files ?

[@K162KingPin]

I can turn 300 oil into 74,100 my by first making packaged fuel. Then rocket fuel.

[@Boozsha_Bo_Bellys]

⚒⚒⚒⚒

[@kyuman1181]

I tried to look for that folder to be able to load the blueprints but I couldn't find it, the saved game doesn't appear

[@Yakez42]

First you need to unlock blueprints in the game progression and then save any blueprint inside the game. Only then session folder for blueprints will appear to copy/paste.

[@tobiassorensson8041]

updated for 1.0 release?

[@anomalousstudios213]

I'm not sure if this is just me but anytime I try and use em it crashes my game. Any reason for that or is it just me?

[@Yakez42]

Update 8 Blueprints crash on Update 7 version. Known issue, but it seems there would be no fix.

[@joshuamoon9559]

Brother I need you to make blueprints for my life. Please. I need help

[@justkrybik]

ёр инглиш ис со гуд))

[@thepioneer5624]

Meddl leude

[@Hanspakjekans]

Hi! Is this also update 8 only? Better be not :(

[@Yakez42]

Hey. I have around 150 hours on 2 saves where I make, test and record these blueprints. Both of them are on Update 8. Most likely I will stick with Update 8 until EA release.

[@crushedexe]

@@Yakez42 =/

[@uptownvapor]

Lol you are using the British flag!!!!!