$10,000 Maintenance Bill!!!!

Ag Chemical Solutions chemical delivery.
The entire crew works together on the rip down of the digger.
First look at the new J&M Combine head trailer.
We are a family farm located in west central Minnesota. est. 1918
We enjoy to share our part in agricultural with you and show our followers the ups and downs of farming.
I hope you enjoy our videos and please don't forget to subscribe.
Check Out Our Sponsor Agricultural Chemical Solutions-
Ships anywhere in the states check out their chemical prices and join the farmers that already get their chemicals there.
www.agchemicals...
www.agchemicals...
Don't be scared to try out a new company. We have been buying chemicals from them for 10 years and have nothing but good things to say about them.
Want To Send Us A Letter? We Would Love To Hear From You!
Our Address:
Larson Farms
P.O. Box 8
Ortonville Mn, 56278
Follow Us On Instagram For Daily Videos
/ larson.farms
Follow Dougo on Instagram
/ dodge.boy.dougo
Facebook.
www.facebook.c...
Check Out Our Apparel..
www.farmfocuse...
Business Email-
[e-mail]
Edited By-
Blondie (AKA Nikki)
Music By-
Imovie

[@h.e.phillips4002]

Best use of music on the KZbin. Compliments to the editor.

[@FieldRows]

I feel your pain.I love the miscellaneous charges for 200 bucks for paper towels

[@scottholbert1192]

Chet, Chet , Chet you haven't learned anything about marriage. It's not your house. It's our house. Then forbid you are divorced it becomes her house in the blink of an eye lmao 🤣🤣 🤣😂 🤣😭 😂🇺🇸👍

[@nbradley9411]

Why don’t you bore out the shanks & put oversized bushings in & save $5 or $6 thousand $$

[@zachreuvers2636]

I think Chet should get sponsored by melo yellow

[@stanlancaster489]

yes he should.

[@codyvandieren2069]

Drink a mellow for me. The past couple weeks all my local grocery stores have been out of mellow. I finally asked and they said coke is only producing coke, Diet Coke, Coke Zero, and sprite due to an aluminum shortage. I am suffering 😔

[@captlucky2320]

How you got a rebel flag and your from Minnesota

[@stephenkennedy9322]

When is JD coming to FIX the FREAKIN QUAD TRACKS TRACKS ? 🚜 They gonna wait til September when it starts raining ⏬Cats n Dogs?

[@jaybiberstein9920]

They have to wait until CaseIh comes up with a better design..

[@DasShaten]

I'm not sure why replace the bushings at all at this point, A) the hole is wallowed out let it just eat it, as the repair cost would be the same but you get another season off of it? B) drill the hole out (make it round) and just insert a segment of pipe and place the bushing inside of that? -- I guess I don't see the real use for the bushing repair....It doesn't seem like precision is that big of a deal on the digger .

[@2010utube100]

You want the shanks to NOT wiggle around the bigger rooted weeds. Tight shanks do a MUCH better job of getting the early season weeds. When in a tillage crop system, it works best to try to get the first spring flush of weeds. The ones you miss at planting time, get too big to kill easily when the next flush comes. Ragweed is especially annoying.

[@dennism5565]

I am simply blown away by how much you know about machinery repair. I have been watching your videos and am amazed by your knowledge on how to fix things. I am guessing your age at 20 - how did you learn so much and be so young? Your dad is super chill and laid back.

[@lestersmith8758]

You should look into a local machine shop. See what it would cost to sleeve the arms so the bushings will fit. They should be able to set up a jig to do them in mass.

[@sharpshooter7127]

It doesn't take long to add up whenever you are doing repairs especially on green paint

[@FieldRows]

It’s robbery. We farm with older tractors pre def, and our labor bill is insanely high.

[@realredditstories420]

Field Rows because the older parts are harder to find, which makes it more expensive

[@FieldRows]

XD Random labor is the bulk of the bill.We run 8330,8430 and 8220. So around 14yrs old, but they are all paid for so that’s nice. Unfortunately they all have around 8000 hrs so about time to upgrade

[@deerepasture]

All repair parts are very expensive, but then the price of new equipment is outrageous. Farm machinery has far out paced the general inflation rate.

[@davetylutki]

waste of money run them sloppy makes no difference

[@anthonyfunderburg2436]

Hey Chet! Why is the Big Swede, not in Larson merch?

[@garystanford6799]

Don't buy new standards where that bushing is loose I could' not see whether this was a steel bushing or oil lite which is a bronze bushing pressure filled w/oil.Bushings what ever material they are come in all sizes and shapes and all id's and od's and lengths.All you would have to do is make a fixture not fancy to hod the part square w/the world run a core drill through the hole for the next size bushing w/ a larger od.You are not going to find anybody in a small town who can tell you whats available you will need to go to a reputable bearing house to find somebody who can read the books and help you.

[@northdakotafarmer5738]

If you had a case tigers mate 255 that would not have happened 🤣

[@alanbierhoff6831]

If you don’t schedule maintenance for your equipment, your equipment will schedule it for you 😆

[@ashlandgunclub1000]

I’m coming out with a comic book. Pooh Bear & the Big Swede.

[@kevins5092]

Nice rebel ram decal, but why do you have a tree moving machine? Do you do custom work with that?

[@LarsonFarms]

We have but we got it to move a tree line back to the farm.

[@rodneycauwels8045]

I have bored them castings for a newer thicker bushing.

[@joshbutterfass5251]

Now imagine paying $10,0000.00 dollars for maintenance on one of your quad track tractors

[@steveadams99708]

Borrrowingstuff from the farm - Borrowing! Dead Lift. You and the big Swede made short work of that "green thing". LOL Good vid.

[@organbuilder272]

If you took them to a machine shop they would bore them out perfectly round. Then you could put the busings in and -if you took the time to properly maintain the equipment - last a long time. Pressing new bushings into hols which are out of round or otherwise compromised, is useless. a waste of money. Don't those thing have lubrication so they don't wear so much??

[@adamslalka3850]

The puny teller particularly glow because school pertinently step atop a clumsy smash. threatening, poised cream

[@EATSLEEPFARM]

$10000 that’s it?!?!! Lol I know the feeling . Our parts bill for 4 18/20 Deere corn heads and one 24/20 had me ready to take a nap. Gotta love it

[@robertquast9684]

Been there done that on our 55’ digger. It wouldn’t be so bad if you didn’t have to buy 100+ of everything and do everything 100+ times

[@terrystephens1102]

I really admire your attention to detail - your machinery is so well maintained and, sparkling clean - a real credit to you all. 😃👌👌👏👏

[@edgarmedina5338]

Was enjoying the channel until I saw your confederate dodge logo. Laterz

[@TheNemosdaddy]

Everyone thinking 10k is a lot, but its cost of maintenance on a tool that's used in rough conditions. Its all a tax deduction at the end of the year.

[@SimonSays2270]

Hope the combust works out for you I used it the last 2 years with my liberty was not impressed went back to bagged ams this year.

[@janekeleher3090]

It amazes me how much you have to know to keep all your equipment in working condition!

[@7rixee]

Jesus, cast is easy to drill, but finding a right bushing might be a job of its own..

[@stangiles2001]

Sweeeddeee

[@Yet1moreUtuber]

When your done looking at the CAT, send it my way Chet

[@AlphaDawg77]

My goodness I thought that was a leaf blower not an impact gun hahaha.

[@Cody_n742]

Awesome video Chet and Nicole Keep up the great work love the videos!

[@waterskiingfool]

Those diggers are expensive maintenance and time consuming

[@justincaputo9714]

Nice trump flag

[@tribulation138]

This would be a cool job to have. To work on a farm like this

[@jessefoster2960]

That 1inch Milwaukee has a sack on it bud

[@edwardmonken4562]

I took those “cages” and threw them away on my rogator after the first belt shedded

[@watermanone7567]

More JD junk. Thanks for the video.

[@tomrichter244]

Who is the young third hand? A relative or a young hired hand?

[@andersonbagents2963]

Heck yeah brother. Peeped the trump 2020 flag 😂😂😂 K A G

[@bohhica1]

Don’t mind me asking,who is Junior?

[@allenmoore4186]

Another awesome video Larson Farms!

[@spencer4556]

I see London I see France I see chets underpants

[@BWYinYang]

🤣

[@tommydrozdowski4733]

Chet, another beautiful vid!!! Keep it up my brother! P.S. Mellow Yellow, IS THE BEST!!!!!!!!!!!!!!!

[@teddybear8545]

Who is the young guy in the video?

[@jaybiberstein9920]

We are remodeling OUR House. She's a keeper, Keep thinking that way and you will be fine.

[@spencer4556]

Does the big Swede drive a chevy

[@smoochmcguire5291]

Great video thanks again

[@kopenhagenkid]

Great video Chet

[@terrystephens1102]

I’ve always admired how you guys respect and maintain your equipment - regular servicing, checking for wear and faults, with prompt fixing. Chet, your mechanical knowledge of the tractors, trailers etc is incredible. 😃👌👌👏👏👏👏❤️

[@waynedevin4789]

You probably dont give a shit but does anybody know of a way to get back into an instagram account?? I stupidly lost my login password. I would appreciate any tips you can give me!

[@silasbrooks2697]

@Wayne Devin instablaster =)

[@waynedevin4789]

@Silas Brooks I really appreciate your reply. I got to the site thru google and I'm trying it out atm. I see it takes a while so I will get back to you later with my results.

[@waynedevin4789]

@Silas Brooks It did the trick and I actually got access to my account again. I am so happy:D Thanks so much you saved my account !

[@silasbrooks2697]

@Wayne Devin no problem xD

[@AssDust]

bud, youre gonna get lit up on this truck stickers

[@shibumi5210]

Were you at all tempted to get a new JD 2230 in 69' width and just junk it? It's only $150-190,000 depending on options... 😉

[@johnnnny]

I can’t help but “Like” the video as soon as it starts - I figure I haven’t been let down so far, chances are I’m going to like it away.

[@RichardGood6761]

Gotta love 10 15 20k+ maintenence bills. 9760 & 9770 were a big chunk this winter for the year

[@ronshauling2000]

Well you didn't show our fav Nichole but you did mention her so...... I hit the like button. Nicholes hidden treasures?

[@nigelgribble8736]

Who is the young chap? Brother or Cousin?

[@BWYinYang]

Pretty sure thats Chet's cousin.

[@modsquad8817]

You can pay your bills I’ll pay my 7k$ combine damage. Tbh it’s not my bill but I caused it

[@barrychouinard4019]

Ha! That was one of our trucks that made your Ag Chem Solutions delivery!

[@kevingrant5463]

CHET YOU ARE A BEAST!!

[@danfinley3690]

Cool video Chet always cool content and jez holy cow Great work out lifting that bin

[@ontheedgewithreg238]

I thought the bushings come split to compress in the shank they do on our John Deere high priced parts.

[@PaulHigginbothamSr]

I couldn't figure out why Dougo was so unhappy then remembered how much this cost. Wouldn't make me happy either. Seems like most tilling if needed is done with these rippers. Not sure how much hp is needed for an 18ft wide harrow but has to be quite a bit of diesel per day. I would think a few hit rocks too.

[@schnakenberglloydsue7313]

Great video Chet!! Nikki, you also did a great job!!

[@tompreiss5010]

Have you seen the 360 blades for that implement???

[@dalerobbins4737]

👍👍👍👍👍⭐️⭐️⭐️⭐️⭐️💪💪💪💪

[@robertjd2208]

Chet does everything only take you a couple of seconds to do a job like removing a shank

[@kirkpennock2997]

Is there a grease fitting on those bushings? Machine the old holes out to fit a sealed ball bearing press fit into new holes. Might last longer, how long do they last with the bushings?

[@bradmorgan1234]

I figured $10,000 wouldn't touch it!

[@carljakel3111]

Do you have any other brothers or sisters that work on the farm

[@jeanlouisbinchet4797]

Waouh, début d'un gros chantier de maintenance sur votre outil de travail de la terre, c'est vrai qu'il est soumis à de sacrées contraintes mécaniques

[@jasperson1000]

Who is Ryland (sp?)? Relative or worker?

[@samuelwalch9264]

Looks like got work cut out for you and is your uncle randy have super strength wow that was a lot of weight

[@garrettclark5189]

Who’s the kid

[@tompreiss5010]

A good machine shop mite be able to rebuild that by welding it and reaming it out.

[@stanlancaster489]

here in central ill. cant get mellow yellow what the heck, are u having the same problem.

[@farmhandluke5182]

Thanks for the video!! See you got the tree spade in the shop hope get to see that thing in action some time! ✅

[@n2slugs]

My 1010 field cultivator hasn’t changed much from yours. It’s got to be about 45 years old now, though. Mine should be redone just like yours but I’m still using it just as wiggly as could be. I only worry when one comes up missing. I figure the wiggling has to be helping cultivate somehow.

[@kevinmeyer3884]

Right you get that extra vibrating action !

[@legodoug6046]

Things happen look at thé bright side no one was hurt

[@blocko2011]

Chet you’re microphone sucks. Please fix bc I love your videos but constantly turn up the volume when you’re speaking and then have to turn it back down when the music plays!

[@robertlonsdale3826]

the music is far worse than the microphone, i mute it everytime

[@irenesilvers7096]

Very nice video, Thank you.

[@robertTaylor-ig1jv]

Hay can you do a now then video I love listen to story's like that

[@thomascooper5668]

Well done Chet and the big Swede a lot of work worth it in the end

[@garystanford6799]

Sorry forgot to ask but where did that Big John tree spade come from it looks like one that was in central Ia.I'm nosey because I wore out two Big John 90's an twenty eight years loved it.

[@LarsonFarms]

Craigslist

[@joshsalmons1867]

I'm kind of surprised to see a Confederate flag Dodge logo in Minnesota lol. I guess country really does run country strong.

[@wyattschmalz8]

A lot of us rep that it’s just the cities that make us blue come to the country and the Democrats are the outcasts

[@jasperson1000]

Springs can also undergo compression -- stored energy.

[@wheelockjeremy]

@larsonfarms - what is the extension you’re using on the 1” Milwaukee impact?

[@J-T-]

Sockets and pipe ..

[@johnperry5102]

good video, lots of bucks for all that wow

[@Mudmowerdiesel]

Awesome channel thank you

[@ryliebroster2780]

Combust is a drift agent with ams in it

[@robihertrampf1717]

Who's the other people in the video

[@billycox1795]

Chet I have 2 quad trax IH tractors and watched a video were you brought a bracket for your hydaudlic hoses and wiring mounted on the back of the tractor. Can you give me the website and or name of what you brought? Thanks Bill

[@LarsonFarms]

[e-mail]

[@billycox1795]

@@LarsonFarms Thanks

[@nebraskanassassin6058]

Hey Chet how's it going brother

[@mattlindgren2886]

Who's the young guy?

[@jamjames1971]

Who's the new employee

[@evenstrandbakken3681]

Bad audio

[@007TWR]

Is that ur little brother working with u

[@LarsonFarms]

Cousin