10 cool 3D printed things! octolapse prusa mk3s timelapses wildrosebuilds

10 3d printing time lapses of the prusa mk3s using octolapse. Timelapse episode 26 Buy the best 3D printer of 2023 here: bit.ly/3oKdmpq (affiliate link)
models:
Apex Legends shield battery: cults3d.com/en...
spiral vase: www.thingivers...
Deckard: www.myminifact...
angry batman: www.myminifact...
witcher 3 geralt: www.myminifact...
Dr. who tardis: www.myminifact...
Low poly skull: www.thingivers...
Cthulu: www.myminifact...
fox: cults3d.com/en...
halloween cookie cutters: www.thingivers...
If you want to support the channel or need a printer, parts, or filament check out www.matterhacke...?aff=7465
You can follow me on social media and see what im printing and some behind the scenes stuff here:
instagram / wildrosebuilds
twitter / wildrosebuilds
twitch / wildrosebuilds
myminifactory www.myminifact...
#3dprinting #3dprinter #3dprinted

[@agepbiz]

Cool selection of models. And your timelapses are always wonderful to look at

[@WildRoseBuilds]

Thanks! glad you enjoyed :)

[@samtheboss6274]

Amazing job I can't wait to see the next one I am always happy to see your bids and I wish there were an infinite amount to watch

[@WildRoseBuilds]

haha! thankyou glad you enjoy watching them! lots more to come stay tuned ;)

[@samtheboss6274]

@@WildRoseBuilds thank you

[@LtLost15]

I really need a 3D Printer in my life.

[@aristotelboro4176]

buy things only 300$ build it in your own way! :)

[@le0d406]

Or buy an Ender 3 it cost only 140€

[@milenperera2068]

I'm making it for 20 dollars at home

[@magneto8882]

Same

[@ismailkaraman2050]

@@le0d406 but I don't have $ 140and 1 dollar equals 8 Turkish lira :( Turkey's economy is really bad (Ender 3 = 1700 Turkish lira bro, and Minimum wage 2200 Turkish lira)

[@jzbreezio]

One of the best time lapses by far.

[@WildRoseBuilds]

thanks Jason!! :)

[@X-JAKA7]

I like the shield battery you printed. That shield battery is from Apex Legends. I enjoy playing that game on my PC. It’s my favorite game to play with my friends.

[@hyperobelisk9593]

The fingers spinning the table LMAO ;'v 1:54

[@thedocto3602]

The TARDIS and the shield battery in the thumbnail got me most interested in this.

[@WildRoseBuilds]

yeah i had a lot of fun modeling that shield battery!! thanks for watching!

[@DankStunt]

@@WildRoseBuilds How did you print it in multiple colors?? and is there a 3d model available somewere?

[@benloi9874]

@@WildRoseBuilds Did you have a multi filament 3d printer? Which one did you use?

[@anthonymabee6404]

How?

[@matsonic3000]

Do it have any functionality or is only a fancy storage pipe?

[@alexisrodriguez6526]

This is relaxing as heck

[@WildRoseBuilds]

thanks glad you enjoyed! :)

[@OZSCQUADS]

love the filament used on the low poly skull

[@pauldevilloutreys5756]

My God ! That's print's are the most beautiful of I never see. You have the most amazing 3d printer of the world

[@EricRohlfs]

Slick nozzle changing tool. I need one now!

[@WildRoseBuilds]

this thing stays on the workbench at all times haha highly recommend!

[@nicktorre8854]

WildRoseBuilds whats the tool called and where can i buy one???

[@MobileDecay]

I saw your hand turning the table. Lol. 😂

[@3dtimelapsefun615]

Awesome Prints!

[@piehi3962]

It's amazing how far technology went

[@jewelator]

Respect for leaving a comment to the author. I would be grateful if you look at my content and rate it. In one of the videos, I made a gold case for a Zippo 3D printer lighter.

[@misadventuresin3dprinting.545]

That purge block on the first print is super crazy.

[@imaginelab3d12]

Your videos have inspired me! I am going to try and make some videos with the octolapse. Also what kind of editing software do you use?

[@marybaker3826]

Your work is amazing and awesome.

[@WildRoseBuilds]

Thankyou Mary!

[@marybaker3826]

@@WildRoseBuilds your welcome 😃.

[@sushicat8497]

Yesss Apex Legends prints, I'm so doing some more once i get my printer!

[@dmanhd143]

What printer are you getting?

[@sushicat8497]

@@dmanhd143 Ender 3 pro!

[@tatu5225]

They are so cool.

[@tom_cat86]

love watching this! never seen this Nozzle changing tool, where can i get one?

[@tal0z391]

These look so cool! What profiles do you use?

[@pepitomlg]

The fox is a kitsune

[@itz-Ender]

The shield battery was one of my favorites.

[@PrintThatThing]

So dope!

[@pappel84]

I love this channel!! Can you please make a tutorial on how to do those timelaps with prusa??

[@WildRoseBuilds]

i'll have a few behind the scenes videos soon, stay tuned!

[@user-ex6ig1gx5q]

me, too, interestingly, I from Russia

[@n_halo]

Сергей Жиглов может, ты уже нашёл, но всё же: такие штуки делаются с OctoPrint, нужна Raspberry Pi или Orange Pi Zero, но с ней нужен бубен. А так у Сергея Ирбиса есть классное видео по этой теме (3д печать просто) Вот ссылка по установке OctoPrint на Orange Pi kzbin.info/www/bejne/aYLWhJuaibl3qM0 (сам по нему делал)

[@user-ex6ig1gx5q]

@@n_halo спасибо. посмотрю

[@mikeedwards740]

What speed settings are you using? The bottom of all my overhangs looks terrible. Always curls a bit. How do you avoid this? Your prints look so perfect.

[@sputnike7676]

How did u make the prints multi-colored? I’ve begun 3D printing and that’s confused me. Did u switch out Filements in between or is ur printer equipped to handle 2 filaments?

[@WildRoseBuilds]

this was the palette pro multi material unit!

[@sputnike7676]

WildRoseBuilds thanks

[@matylang]

What's that tool at the end you used to swap your nozzle? Looks like it also holds the heat block so you don't twist it?

[@MarkusGameforyou]

zcatch nozzle removal tool

[@WildRoseBuilds]

it's the zcatch nozzle removal tool, pretty handy to not have to hold the heatblock with pliers or a wrench when switching out nozzles ;)

[@CMDRBlueeagle66]

I wanted to know the same thing! Nice to see someone else was curious too :)

[@GiovanniDjojo]

But I see in the website that they hadn't sockets for nozzle smaller than 4 mm, you can use any socket?

[@spa5e]

Hi! Loved the video and got my hands on a 3d printer myself (1120 cnd) But everytime i try to print: it goes crazy and spills all filament orrr starts way to high (i know bed leveling) can you please help? it randomly starts at the side too instead of the middle🤯🙄😥

[@WildRoseBuilds]

check that your slicer bed size settings are correct and insure that your z axis endstop is working correctly and secured in the correct spot!

[@sameer7420]

How to do multi color printing? Plz can you make demonstration video for that!?

[@cadenborden6834]

How did you print the shield battery in two colors in one print?

[@rocknrollnerd3]

Is that a special ratchet intended just for changing printer nozzles? Looks really useful!

[@WildRoseBuilds]

Yeah! it's the zcatch nozzle removal tool. it holds the heatblock without damaging the heater cartridge and thermistor wires ;)

[@Leon_2705]

What filament do you use for the low poly skull please ? Nice video !!

[@WildRoseBuilds]

stronghero3d rainbow pla!

[@Leon_2705]

Ok tank’s

[@abasmahdee1696]

@@WildRoseBuilds silk or regular ?

[@JoaoGabriel-se9rk]

What was that phat purge block my guy

[@irinacerise8049]

Batman seems to like :))

[@braingrenade]

What was the tool you were using the change nozzles? Looks like it was specifically made for changing 3d printer nozzles.

[@iOssO]

How did you get it to print in different colors in one print job

[@peterbatch5526]

Hey I’ve been doing time lapses my self and I’ve been curious as to how you get the extruded out of the way

[@seppevanloo2449]

Peter Batch He probebly used a rasberry-pi with octopi installed and conected to a camera

[@hellcat3ds623]

Which slicer do you use

[@WildRoseBuilds]

Simplify 3d

[@abasmahdee1696]

where is the link of the yellow memory cards box or what the name of it , very interesting video

[@kevinvo2120]

Hey Do you have a DSLR on your ocotolaspe cause the image quality on the octolaspe are so good. If not what camera do you use?

[@safargris815]

Where can i get the tool you are using for nozzle change ??

[@Picalzz]

The link to the second model is wrong :( The vase looks similar, but not the same. Can I have the link to the original please?

[@WildRoseBuilds]

updated the link! :)

[@Picalzz]

@@WildRoseBuilds Thanks!

[@AstonJay]

How did you print the 3rd color on a mk3s? As far as I know it only has 2 color options, and the 3rd color is on the same plane as the blue & white?

[@rodionkatalov3953]

Whats the instrument you use for placing your nozzles?

[@greg6882]

The link you have to the vase is not the vase in the video. Can you please provide the proper link?

[@zobionekenobi]

www.thingiverse.com/thing:3435434 It's from the same designer :-)

[@WildRoseBuilds]

thanks for this i'll change it right away!

[@chloemcholoe3280]

what did you use to change your nozzle? it looked intresting. it holds the heater block in place too it seems?

[@WildRoseBuilds]

yep its a tool made by a company called zcatch!

[@YorikoRayne]

Where did you get that tool for your hot end

[@creationbeatsuk]

How do you record without the nozzle in shot? Or do you mask the nozzle out in editing?

[@doom9242]

How did you get the double ( triple?) colors on the battery charge ???

[@johannesenns]

Awesome Video again! What is that for a tool you use for changing the nozzle?

[@saishogen1968]

How did u print 3 diff colours at once??

[@Mad_Monkey]

Hey do you have a link to that nozzle tool you were using?

[@WildRoseBuilds]

z-catch.com/ been using this tool alot lately when switching out my stock nozzles for higher end ones ;)

[@iviaverick52]

Jesus, did you see the size of that purge block for the shield cell print!?!?

[@theclover3]

So i have a question how do you get 2 diffrent colors on the same layer worhout the whole layer being that color?

[@hubcityrez6058]

Is there a multicolor pla filament that you recommend?

[@davidtikwa423]

how did you do the colors on the first print any good tuts on that ?

[@Ricky32908]

How are you printing 3 colors at the same time ?????

[@carlosaugustohuancahuayta8402]

I love your videos

[@darkprotector81yolo97]

I need to get better settings after seeing this. Do you use cura?

[@maxhennequin5953]

Bonjour, comment réalisez vous plusieurs couleur sur la même ligne avec une seule buse ? Merci

[@Ricky32908]

How do you print 3 colors at the same time???????

[@n_halo]

I’m very impressed by your job. It’s so beautiful!1!!) But i have a little question, how do you do the hyper lapse wit camera rotation at your previous videos. I think it’s additional construction with independent from OctoPrint camera . That’s right?

[@WildRoseBuilds]

yep its a stepper driven arm that i made using my cnc, i'll have a video on that soon once i make some repairs/improvements to it!

[@n_halo]

WildRoseBuilds oh, that’s would be cool)

[@caparlocos]

What tool is the one you use for tighten the hot end?

[@WildRoseBuilds]

that's the zcatch nozzle tool!

[@coreicke]

Nice timelapse 👍 Which camera did you use? Thanks 🙂

[@danielmcguinness9044]

How do you take the prints off the bed so easily?

[@lacc_nick]

What tool are you using to change nozzles?

[@UUTechRU]

What rotating platform You use for timelapses ?

[@WildRoseBuilds]

i built a stepper driven arm for that, i should have a video on that once im done making modifications to it ;)

[@JoshuaJoshua0]

@@WildRoseBuilds I'm surprised by the lack of mk3s timelapse camera setup examples there are out there. I'm looking forward to your vid :)

[@ericalvarez9345]

Love your videos! How much does doing the octoprint time lapse thing add to your overall print time? Just curious if its marginal or significant, like does a print take twice as long or only 10% longer with that feature? Or nothing at all? Thanks!

[@WildRoseBuilds]

it depends on layer height and overall height of the model but usually adds only an hour or so to print time!

[@mikearenas7561]

How do you avoid threads? or are you always waiting for the impression while cutting the excess material?

[@Supermonicamatos]

se pueden fabricar piezas en acabado inoxidable

[@ChaosMyotismon]

I'm curious about the printing in multiple colors. How did you do it?

[@icb6418]

Usually you can print in dual colors or multiple colors with mods, a filament mixer, and settings on select printers with the multi color feature. Hope this helps

[@icb6418]

You can also use multicolor filament like on the geometric skull, I believe there may be a make anything video on the topic too.

[@ranulfo102]

AMIGO, BOA NOITE. E OBRIGADO POR COMPARTILHAR SEUS PROJETOS. QUAIS FILAMENTOS VOCÊ USOU ? QUAIS CORES DESSES FILAMENTOS ?

[@TougeSlayer]

I wanna see those cookies lol

[@deanyau6211]

How to make the time lapse? Amazing!!

[@WildRoseBuilds]

thanks Dean! i take 1 picture per layer with the extruder out of the way!

[@deanyau6211]

WildRoseBuilds cool!! Do you have any tutorial for this? Million thanks!!

[@hussainbhavnagarwala2596]

how does the camera move along with the nozzle head

[@revolix3]

Really cool. What's the tool name you used to change the nozzle please?

[@pavelcraft839]

The shield battery in Apex Legends is cool. Who play Apex Legends?

[@WildRoseBuilds]

im back to my csgo addiction :(

[@Gostek1991]

How do you get soo good quality with your prints ? Mine on Anet A6 dont look half that good....

[@WildRoseBuilds]

Lots of tuning!!

[@Gostek1991]

@@WildRoseBuilds but on the clip you dont even use supports...I am curious

[@khosrowbarati5726]

which camera did you use and is there any cam which records and shortens the video like yours automaticly ? or do you record the video and use a software to fast forward

[@JanTec3D]

Hey, he told me that he uses the pi cam V2. Take a look at octoprint ;) JanTec

[@romanroman9504]

Хорошая работа 👍

[@Lumalee]

I love your videos and watching these timelapse videos are so mesmerizing! I recently set up octoprint and octolapse on my CR10 but filament is so expensive I can’t really print anything big. Got any cheap PLA brands that you know of? Doesn’t need to be high quality for what I want to do most things with it. Thanks again, keep uploading great videos!

[@FOXXX509]

Do you have access to Amazon? Overture is a decent brand of PLA, same with Hatchbox. Overture has rolls for $15 and Hatchbox is around $20. I’ve had good luck with both and they are pretty cheap for a 1 kg roll.

[@Lumalee]

R3INHARD1 yup I use amazon for everything. I make sure I have 2-3 Hatchbox rolls on hand, for anytime I need detail and cheap stuff for functional parts which I use more.

[@WildRoseBuilds]

i have great results with AMZ3D brand pla off amazon or hatchbox!

[@Lumalee]

WildRoseBuilds thanks so much! Hatchbox is what I mostly buy from, unless I need something unusual like marble or translucent. Thanks so much for the hearts! I will definitely check out AMZ3D! Keep up the fantastic work

[@415legacy]

How do you record without hot end in the shot?

[@michaeliscool3007]

What printer is this?

[@cockpitlife737]

Bro which 3d printer you use bro

[@between5and6]

I am missing the data for the box for SD-Cards! Do you have the data?

[@Tobe0812]

What ist this nozzle fastening tool?

[@wormss17]

What 3D printer do you have and why do I not see the tip moving??

[@JoshuaRilliet]

Bonjour, quel est cet outils que vous utilisez au tout début de la vidéo pour serrer la buse, est-ce un outils spécifique à l'impression 3D ? On dirait qu'il y à une partie qui maintien le corps de chauffe et qu'une autre serre la buse mais je ne vois pas bine de quoi il s'agit, si c'est un outils dédié ou bien un outils fabriqué par vos soins ? (Google Traduction): Hello, what is this tool you use at the very beginning of the video to tighten the nozzle, is it a specific tool for 3D printing? It looks like there is a part that holds the heating body and another tightens the nozzle but I don't really see what it is, if it's a dedicated tool or a tool made by yours care ?

[@samtheboss6274]

Awww I'm sad because now the video is over

[@WildRoseBuilds]

:'(

[@dominikroth7823]

what is called the material used for that demon 5:53 I know it's PLA but the name of the color is called? looks like clay

[@WildRoseBuilds]

matte moss grey eco pla from 3d jake! great material!

[@dtice123]

What's that tool hes using at the beginning?

[@JanTec3D]

do you have ordered the prusa mini ?

[@WildRoseBuilds]

Not yet! i'll wait until the first round of customers beta test it haha

[@JanTec3D]

@@WildRoseBuilds okay, nice ;) I've ordered it. can't wait to see your next videos.

[@WildRoseBuilds]

let me know how you like it!

[@JanTec3D]

@@WildRoseBuilds for sure! I'll make a video about it and share some prints! twitter @jan_tec

[@jimperry4108]

Was that Rikki Tikki Tavvi? Mongoose? lol

[@Tepiig]

Kitsune!

[@Haos942]

What size nozzle are you using?

[@WildRoseBuilds]

i usually stick to the stock .4mm ones ;)

[@golddarren140]

You should do a give away some time

[@WildRoseBuilds]

yes! we have a few things in the works!

[@alienmapping3536]

@@WildRoseBuilds i want this! 😭

[@Reece_Johnston]

I don't even know what the first build is can someone explain

[@WildRoseBuilds]

Its a shield battery from the game apex legends that i designed in fusion 360 and printed using the mosaic palette 2 pro multimaterial system ;)

[@Reece_Johnston]

@@WildRoseBuilds I never knew that thank you

[@alienmapping3536]

@@Reece_Johnston yeah and its fire!

[@deleteq2481]

I can't find Gerald of rivia STL. Someone have?

[@ZainalYoutuber]

How do you make time laps??