That bit about fixing scratches with the heat gun is awesome! Thank you for the tips
@jeffb9574 жыл бұрын
Hi there, I'm brand new to leather, but I've been a woodworker for years. You are right about stropping. That's how I keep my hand carving chisels nice. When you make a strop, avoid using a 2x4 as your wood base. As temperature and humidity changes the wood will move and distort its shape a bit. Instead use a piece of 3/4" MDF, or a scrap of cabinet grade plywood. Those are dimensionally stable, so there will be no wood movement issues to change the shape of your sharpening surface. Happy crafting 😊
@anantharamba68324 жыл бұрын
Greetings, Thanks for the overall video, with practical tips and hacks.
@jamesjimmeyer77754 жыл бұрын
My man!!!!! One of the best videos I’ve seen so far. The presser foot trick....heat gun to get out scratches....edge beveled sharpening!!! Daaaayyyymmmmnn !!!! Jim & Erin / Riptide Leatherworks
@MrMicrogravity4 жыл бұрын
I made a 'saddlebag' (about 16" x 8" 4") for use on an antique bicycle. This would get rough use over the years so I used slight bits of epoxy to lock the stitching in hidden areas. Several spots along long lengths of stitching and on stitching of straps and buckles. In case the stitching gets nicked or cut, the stitching won't all pull out. Thanks for the heat sealing of the waxed thread to lock the ends.
@SidsDrakon4 жыл бұрын
I don't leather craft but man its soo satisfying to watch you work. It so awesome to see leather working. Keep it going.
@anemoiyang43624 жыл бұрын
These tips are so genuine, I don’t know much about leather craft , but I can see them be actually helpful
@garyledford29014 жыл бұрын
I've been doing leather for a few years, and you showed me some new tricks. Especially the heat gun for scratches, and the string trick for stropping edge bevelers. Good stuff!
@appleml80134 жыл бұрын
You convinced me to try leather crafting out. I only bought the leather and the tools you used for tracing and cutting out the leather pieces, just to see if I could do that part lol. I did it pretty dang well and now i'm motivated to go further. Just purchased the rest of the tools to finish the job, hope I can do it. Thanks for all of these videos!
@bmedic71623 жыл бұрын
how’s it going now?
@eddieoneill93934 жыл бұрын
Thanks a million for your tips and the way you share it. Love your workshop.
@SVENofKY4 жыл бұрын
Thnx!! Great tips!! Regarding marking of leather by pressor foot or feed dogs: my machine (inexpensive one) came with really sharp teeth that were tearing the leather up. So, I ground the teeth down and then coated the nubs with epoxy to get a smooth surface. Worked great. Don’t understand why they would supply such horrible feet/dogs but, stuff happens, hacks to the rescue.
@albertoarnaizt.97464 жыл бұрын
Gracias por todo los que nos compartes. Es una maravilla ver tus videos, por todo que aprendo y sobre todo con el sentimiento que trasmites. Mis mejores deseos para tus proyectos. Saludos desde España.
@jeffbrubaker44608 ай бұрын
Another quick tip for beginners, a soldering iron can also burn your threads and if you adapt your small stamps to thread into where the tip goes you can use itbrand with. You can also adapt a cheap drill press for handheld drills to hold the soldering iron to use as a hot stamp.
@starharrington3 жыл бұрын
I really appreciate your timely and useful hacks and tips! Although I work a full time job, my heart longs for creativity. Since I create several different genres, I forget the basic skills sometimes when starting a new project. I create custom journals, from dyeing and baking my paper to creating a 300-page book. So I’ve made all the book innards and I want to make a leather cover, 1st leather journal 😬. Can’t tell you how many hours I’ve wasted and leather I’ve ruined 😡. But I’m not giving up, I keep searching and researching and that’s how I found you. Thank you for stepping up and sharing your talent and your love for it with others. I’m listening …
@SOEtacticalgear4 жыл бұрын
Love this video man
@michelantounchatta81 Жыл бұрын
Thank you for all the small and important notes and tips on using leather tools. Greetings to you from Syria, from Damascus. I am interested in the videos you make and I can learn from you from a distance. Thank you and I will subscribe to your channel.
@asheirahs_nook4 жыл бұрын
I'm just learning about bookbinding, but would love to combine it with leatherworking someday to make beautiful leatherbound journals and/or books. I love how your explanations are clear and to the point.
@kaidean4 жыл бұрын
I bought a corner punch which is smaller than I wanted so I exclusively use the cutting method for nice rounded corners.
@ДанилЛогвиненко-б5г4 жыл бұрын
Hi Ryan! You are really a cool man! Your advice to pull out the spring on the sewing machine divided my sewing into before and after. Respect from Ukraine, thank you very much for what you are doing!
Thank you so much for helping us with theses important tips, tricks and hacks 😅 , hope you have all the best 🌸🌸
@betford22 жыл бұрын
Your videos are so easy to watch and helpful!
@MandrilSolo2 жыл бұрын
Wow….. priceless ! Thank you thank you, for the time and effort you put in these videos. God bless u brother and gives prosperity in every way ! I mean it.
@aleksandrejikia27124 жыл бұрын
I use a tobacco filters for coloring edges of my leatherworks, it's very simple and comfortable :)
@amiekennedy98304 жыл бұрын
Thank you 10000x over for putting such quality content out. Your channel has inspired me to finally start learning leather craft. I’m excited to try some of the projects on here.
@LukeDorny4 жыл бұрын
Agreed with all of these but didn’t think about the thread zapper. Speed reducer is critical, especially for learning, but even as a pro. +1 for Smiths.
@dc853373 жыл бұрын
For the pressure foot - it pays to sand off the very sharp edges. I did this to mine and it also made a big difference. Spring tension reduction and sanding the edges is the trick to preventing marks on the leather.
@slrstuff74083 жыл бұрын
Thanks for this mate, for an old bloke starting a new craft, this was a cool insight. Cheers from Australia!
@sailnekkid4 жыл бұрын
Have been doing leatherwork off and on since 1969.....Still have all my original tools, plus a gazillion more I've collected over the years depending on what new projects I work on....Never knew anything like the Thread Zap existed.....Now I know.....Am ordering one today.... ;o) Thanks!
@RebelYell952 жыл бұрын
A lighter with the right distance will not burn your project. Hammering the stitches it to prevent wear in the stitches. Water is free for burnishing; dye isn't. I love that scratch fix.
@Iknowonlywhatimtaught3 жыл бұрын
I realized this 8 yrs ago. I was taught to use it and toss it. I learned about stroping my knives in general. After a month i was in my craft room and was think about all the razor blades i was collecting from projects. I had a half a shoe box (500) of double utility knife blades. I started stropping the blades after each cut or project. I was shocked! I had spent a lot of $$$ using and throwing away used blades. I stropped all the blades and now i have enough blades i should never need to buy blades again.
@michaelpcooksey50964 жыл бұрын
Sticky Contact Cement Lid: B4 I learned petroleum jelly was ok or putting can in bag and storing upside down worked...I cut a small piece of 2 x 2 and with liberal use of gorilla glue made a great leverage handle. I still like the leverage.
@mohamedabogabal29124 жыл бұрын
Great video as usual.. Big fan from Egypt and just starting in leather handcraft
@COEYRN2 жыл бұрын
Haha now I know what that piece leather is for that came with the kit 🤪I can also use this on my wood chisels. Thank you. I love all you guys that post these DIY videos. You all have made the Pandemic just a little, no A LOT!!! More bearable. Must add this. I just saw this thread burner in an art store. Guess what I'm buying tomorrow 😁
@madelinegrudens2 жыл бұрын
Those were truly useful tips - for me anyways!! Thanks so much for sharing - especially sharpening rotary blades - I spend so much money on them, but always save the used blades for paper and pattern cutting - (I make clothing) - now I know I can sharpen them and use them on my leather projects!!!
@theuktoday42334 жыл бұрын
I like your videos, I am locked down in the UK right now and wanted to learn something new so ordered tools and will be learning by the end of this week virus permitting! Thanks for all the helpful videos.
@scp09063 жыл бұрын
Look in sewing notions for a rotary blade sharpener and save your fingers. It's basically a circle sharpener. Add some jewelers compound and you're good.
@lauraweiss78754 жыл бұрын
Before watching this video I wondered if there was anything new or useful here. Uh... yeah! Thanks for all the great tips!
@LittleKingGoods4 жыл бұрын
Haha yay!
@Picardgolf4 жыл бұрын
Putting out amazing content and has pushed me into leather craft. #handmade #leathercraft
@kori13254 жыл бұрын
Your videos are the best 👍
@redroadrunner15454 жыл бұрын
Love your work. Thanks for sharing your tips. The string for the beveler perfect. But trim allowance is a key tip. Thank you. Cant wait to get some more leather.
@StoryDrivenFilmmaking4 жыл бұрын
I don't make leather goods but I find your videos so entertaining (and relaxing) to watch. Even this video where I am learning about all the different tools, hacks, and techniques. Keep up the good work! P.S. The wood burnishing tool is my favorite part of every video for some reason!
@LittleKingGoods4 жыл бұрын
Thanks Thomas!
@andrewnguyen55463 жыл бұрын
Trim allowance is so good. Thank you so much for the tip.
@jefflowery7308 Жыл бұрын
I never thought about sharpening my rotary blades! That’s going to save me a ton of $$! Thank you!
@LittleKingGoods Жыл бұрын
Glad to help
@karengerber83904 жыл бұрын
Thank you! Thread zap to melt the wax buildup is genius!
@nestorverdu81254 жыл бұрын
Gracias por todo el aporte de conocimientos que haces, DIOS TE BENDIGA !!!
@melmerc404 жыл бұрын
These are all great tips! I don't have any tips, but I would really enjoy seeing a video about what you do with your leather scraps. In sewing, it's easy to avoid fabric waste and fabric scraps can be used in so many different ways, so I'm curious to know how leather scraps can be repurposed or recycled.
@pwaguzipapa73283 жыл бұрын
Nice one nice, thanks for the tips. Am a beginner and i appreciate your advice. Thanks
@ericgough16754 жыл бұрын
I'm just getting into the craft and rounded corners have been giving me a problem. Thanks for the tip!
@lukeaugustini78664 жыл бұрын
Before I got myself some I would use worn out hole saws. Use a bench grinder to knock off the teeth, mark out the radius you want grind a step in and then put an edge on it. Works alright
@jeremykinnear97864 жыл бұрын
@@lukeaugustini7866 That's a great idea. The teeth don't cause lines in the edge at all?
@lukeaugustini78664 жыл бұрын
Jeremy Kinnear nope I grind all the teeth off and a step in to it and then grind the radius to a sharp edge. Best of all you can get a large bolt that’ll screw in to the holesaw and you have a handle and something to punch
@Hahalehandro4 жыл бұрын
Man, you are so inspiring! I admire your enthusiasm and devotion. Since I discovered your videos on KZbin you've been encouraging me to pursue my own leather craft thing. God bless you! Greetings all the way from Bulgaria! :)
@LittleKingGoods4 жыл бұрын
Thanks so much!!!
@skiddrowe91044 жыл бұрын
When you use a rotary punch to punch holes in leather, it helps to take a piece of scrap leather and place it under the project leather piece. Then, when you punch the hole, and hear a certain sound, the result will be a precise and clean cut.
@fakiirification3 жыл бұрын
wow. thanks for this. so simple i would have probably never thought of it, but i just randomly saw this comment and tried it on some soft scrap leather i was working with earlier, and it works so well. i was having to go in an dig the plugs out with a knife.. thanks!
@skiddrowe91044 жыл бұрын
If you have a power burnisher, and want to clean all the crud (waxes & dye) from it, a good method to use is the following: Take a paper towel and fold it to the size, 2"s X 2"s and moisten it with denatured alcohol, hold it rather snuggly against the cocobolo burnisher and turn on the motor.
@KennethMcGrath4 жыл бұрын
Curious to know were people buy custom maker's mark for foil stamping. Any recommendations?
@LittleKingGoods4 жыл бұрын
Sterling Marking Products.
@KennethMcGrath4 жыл бұрын
@@LittleKingGoods Thanks!
@tovdy4 жыл бұрын
Could you make a video on sizing your projects? Love your vids man.
@Kovalenko-DIY4 жыл бұрын
You're the best! Loves you from Russia
@maryirwinartdesign82353 жыл бұрын
Thank you SEW MUCH for the spring hack for my Juki!. Had no idea you could do that to reduce the pressure, but will take mine out in the morning! It’s been driving me crazy! I already filed down the bottoms of my pressure feet with a Dremel which helped too.
@HelenMcLean4 жыл бұрын
"Creating corners. There's a way around this." Nice pun.
@Cgljr3 жыл бұрын
Thanks for the tips, appreciate you sharing.
@SamHolland4 жыл бұрын
LOVING the new space, man. Watched your videos on it with Peter, and your tour and it makes an epic backdrop :) Keep smashing it.
@briansmith55794 жыл бұрын
Great video, thanks for the trick about the corners. I got my corner punch but I can never get to cut straight, it always flares out as I punch it down; maybe cuz of the thickness of the leather. I've got a new back up plan now!
@Rustygulley-r3r4 жыл бұрын
Thanks for another great video. Love your workshop.
@cdfont19624 жыл бұрын
Thank you. I learn so much from your videos..
@suziedeschene50694 жыл бұрын
We love this growth. Love this channel
@LittleKingGoods4 жыл бұрын
Thanks for the support Susie!!
@hideteak90984 жыл бұрын
Fantastic video. Dull edge bevellers have been a consistent difficulty for me; the string trick is just genius! Thanks so much! Once you get your cheesy intro/outro thing sorted your channel will easily be one of the best! 😁👍
@heyyitsandy4 жыл бұрын
LKG droppin' knowledge babyyyy
@alzathoth4 жыл бұрын
all I can say is AWESOME! as a beginner I am sometimes overwhelmed and even intimidated with leathercraft. THANK YOU. you got a sub today! :)
@roihuvuorennahka16314 жыл бұрын
Thanks Ryan for good tips! Signed up for Skillshare too.
@dopamin192 жыл бұрын
Senang ketemu channel yutub ini 😍
@calissaobviouslycannotdeci74194 жыл бұрын
This has got to be one of the best tips video i have seen in a while! Thanks for sharing and I hope you make more. I'm new to leather and learning stuff like this makes it more fun and less scary. xoxo
@Kaalokalawaia4 жыл бұрын
Great tips. Thank you.
@markmeador1137 Жыл бұрын
I do wood carving also, when I first started I used x-acto knives. I stropped the blades and I could use the same blade for months. I just started leather craft and I love it. My hands are getting too crippled to carve wood and leather is so much easier on my hands.
@tangiesearsbrown20224 жыл бұрын
Thank you so much!!!!! I’ve learned something amazing. Definitely gonna do the foil hack.
@kendaigle12433 жыл бұрын
Loved #9 figured it out about 6 months ago. Dye for edging is brilliant
@kongcharathpanawattanawong19763 жыл бұрын
Really a pro.... Thanks . It's an inspiration.
@allfortheking4693 жыл бұрын
Priceless, thank you.
@mediumgrey19473 жыл бұрын
Magic eraser sponge for dyeing edges. Cut a little cube and game changer.
@nickedik4 жыл бұрын
You are an inspiration! Keep going! ✌️
@kristymelgoza63803 жыл бұрын
Excellent tips! Thanks!
@letshaveago4 жыл бұрын
Thanks for the video! Lots of great tips for details I might have missed if you hadn't highlighted them.
@DavidJynnTru4 жыл бұрын
i love the way you sharing
@shawnpatapoff58464 жыл бұрын
Damn! I was really wondering how the hell to sharpen my edge beveler!
@killernils4 жыл бұрын
Thanks alot for the tips!
@shirleymalar27734 жыл бұрын
Nice video! Love all the useful tips & tricks.
@skiddrowe91044 жыл бұрын
A round glass vinegar bottle makes for a sizeable roller, for gluing leather. It's cheap, too!
@SVENofKY4 жыл бұрын
Topic request: leather glue... what do you use and why? Not happy with the one’s I’ve tried, so need some ideas.
@pavel_ochonsky4 жыл бұрын
Super awesome video. Itd be great to have more like this one
@timmahoney97203 жыл бұрын
Thank you for sharing these insights ! Sending up some love to you and your family from Brooklyn ! ✌️
@Богдан-г5в4щ4 жыл бұрын
Hi, awesome videos what edge dye you use in montana marker?
@LittleKingGoods4 жыл бұрын
Fiebings pro dye
@Hackdaddy814 жыл бұрын
About to get my first leather and tool and learn how to do this jazz.
@Ruyagozlemi3 жыл бұрын
Everytime I feel like im not getting anywhere i watch this guys videos and I get perked up.
@d498ns3 жыл бұрын
Hey Ryan..Love your channel..I got a question for you...the marker you use is supposed to be used with acrylic paint. have you had any problem using Fiebing's Professional Oil Dye ? Thanks for all ..Peace and God bless you !!!💯
@LittleKingGoods3 жыл бұрын
I use the pro die. It works the best.
@markdmaker31734 жыл бұрын
Awesome video! I love the tips and tricks videos. I’m gearing up to start leather work and really appreciate all that extra help.
@Ruyagozlemi3 жыл бұрын
OmG!! The edge beveler one got me! I have to keep buying new ones cause no one knows how to sharpen them.. thanks for that !
@gergogalamb27934 жыл бұрын
Thank you :) great tips 🦾
@cannorr82444 жыл бұрын
Thanks a lot man. Love your channel)))
@damarsantosa11154 жыл бұрын
Tks LKG, very helpful
@billcumming10913 жыл бұрын
Nice clean shop.
@TheWildBuckOutdoors4 жыл бұрын
Ok just the heat gun arrived today and oh man it was fun. Just one thing, i see the gold stamp is not really perfect there are missing spots. What you think may cause this? Not enough heath or bad folio?
@meltahir2 жыл бұрын
Very helpful, thank you. Where do you get your stamps made?
@garywills56824 жыл бұрын
Here ive been folding sandpaper in half with rouge and fighting to hone my edge bevelers . Works but cant wait to try string to hone them. Thanks