10 Tools that changed how I do woodworking

📽️ WHAT TO WATCH NEXT
Tools every woodworker should have- • Why doesn't every wood...
More tools every woodworker should have - • I won't work without t...
10 things you'll always find in my workshop - • 10 things you didn't k...
✅️ TOOLS AND SUPPLIES IN THIS VIDEO:
Centipede Work Holder - amzn.to/3E5LGxY
Amana Tools Countersink Drill Bit - amzn.to/3xurCTn
DeWalt Cordless Trim Router - amzn.to/3D5WtGW
DeWalt Plunge Base - amzn.to/3o1Lvho
Digital Angle Gauge - amzn.to/3lgE588
Castle TSM-12 Pocket Cutter - bit.ly/castle-tsm-12-pocket-c...
FastCap Right/Left Tape Measure - amzn.to/3HXP9km
FastCap Standard/Metric Tape Measure - amzn.to/3nYftmv
True Position Tool Cabinet Hardware Jig - amzn.to/2ZAvJRk
Mag Switch - amzn.to/3D18TzK
Mag Switch Starter Set - amzn.to/3ldmRsb
Fisch Brad Point Drill Bits - amzn.to/318zCx2
PEC T Square - amzn.to/3p6UOvJ
✅️ LIST OF THE TOOLS I USE IN MY SHOP : bit.ly/tools-i-use
*Disclaimer - As an Amazon Associate I earn from qualifying purchases
✅️ HOW TO SUPPORT MY CHANNEL
Get Project Plans: bit.ly/download-project-plans
Visit My Website: mwawoodworks.com
SUBSCRIBE : kzbin.info?...
✅️ MWA WOODWORKS ON SOCIAL
Instagram: / mwawoodworks
Facebook: mwawoodworks
Pinterest: / mwawoodworks
---------------------------------------------------------------------------------------------------------------------------------------------
#woodworking#tools#giftideas

[@SpencleyDesignCo]

Awesome list, Matt! Great work on the video!

[@Zie_carpentry]

👍👍👍

[@Foodgeek]

You meant to say that the tape measurer has standard on one side and Imperial on the other, right? ;) Nice tools. I really like the pocket hole machine :)

[@MWAWoodworks]

🤣🤣

[@MANJITSINGH-ko2oi]

super cool tools.

[@davidcole333]

Looking back on the days I was setting up my shop...I could have saved a sh**ton of cash had I had good advice like this. All of these tools are keepers and very smart choices for solid reasons.

[@jds604]

Love the recent content Matt. Also like that you’re finally smiling in your videos 😁.

[@MWAWoodworks]

🤣🤣🤣

[@robertkerby2581]

Great Tools! Well done!

[@halsonger1317]

The Fastcap lefty-righty tape measure also has a built-in pencil sharpener and the white area is a write-on board that you can erase and reuse for making notes while measuring. This is the tape that lives in my apron pocket.

[@MWAWoodworks]

All true! It's such a handy tape measure

[@rickwalker557]

Thanks Matt. I added 4 cabinet tools to the my shop this summer plus a large dust collector so the centipede is what I need next because shop real estate is closing in. I certainly agree about the cordless trim router. Extremely handy. Thanks again for the video, time to shop.

[@MWAWoodworks]

The centipede is really handy for plywood. Makes it so much more enjoyable to cut 😃

[@Zie_carpentry]

*EXCUSEME HELLO FRIENDZONE* 😊

[@jaykeehan5813]

Really like the brake on the Dewalt trim router. Every time I turn my current routers off I have to watch the bit spin down and it would one less step if I didn't have to do this. However, probably not enough of a game changer to switch over from what I currently have but if I know of a newbie looking around I'd definitely mention this to them.

[@MCsCreations]

Pretty awesome tips, Matt! 😃 Thanks a lot! Stay safe there with your family! 🖖😊

[@Zie_carpentry]

Hello sir ✌🤝🤝

[@AlainStar]

Thanks ! 🙏 👍

[@karenmitchell6814]

I bought the 4x4 centipede (and some accessories) on Black Friday when it was on sale.👍

[@MWAWoodworks]

Nice!

[@DonnieKluck]

Matt love the videos. Keep up the content. Had a question for the Bora Centipede, do you have to open it up and use it fully open? Like if I got the 8x8 could you only open it up to use 2x4 or 4x4 or do you need to actually fully open it 8x8? I was looking to get a couple 2x4 since I dont have much room but then could make a bit bigger one with a couple together. But saw your video and was wondering and thinking maybe I could get an 8x8 and not have to open it totally up to use.

[@BoTTanker]

This awesome love these videos could you please do a video on epoxy. Deep pour/shallow pours or test what’s the bet

[@rw7532]

What size drill bit do you recommend for the Amanda drill and countersink? I usually only use screws to connect 3/4 plywood together.

[@nordggn]

Do you use any particular insulation under your plywood to cut on? How thick is it?

[@MWAWoodworks]

I just use the pink foam insulation from the big box. Owens Corning in think. It's about 1.5" thick

[@leslievasquez136]

Thanks for the suggestions. Through out the video you show a mtf table but it is plywood is that the armor tool butcher table?

[@MWAWoodworks]

Yeah I have an MFT as well as the Armor Tool bench.

[@chrisnash2154]

Hands-down, the best woodworker recommended gifts! I really liked how you tactfully avoided calling out the Kreg pocket hole. I suppose Masca and some of the others bore at 15°, but Kreg is definitely the leader.

[@MWAWoodworks]

Yeah drill pocket jigs are mostly the same and very different from a Castle machine but I'm not meaning to put down Kreg or anything else. Those have a very good place in the DIY market. I just want to show that there are upgrades to be made while still using pocket hole construction 🙌

[@chrisnash2154]

I agree and Kreg should never be viewed as something negative. If anything they should be viewed as, “The gateway drug to woodworking”. They made it insanely easy for the weekend warrior with no experience to build their first piece of furniture. That being the case, when that inexperienced weekend warrior is ready to step up their game not only because their skill level has improved, but they are also looking for a higher quality pocket hole, then this is the way to go.

[@jbenson9403]

Got the Dewalt compact router. Really love it the base that comes with the router really helps with stability and whereas most compact routers scream like a banshee, the Dewalt compact is astonishingly quiet using some magical Dewalt science engineerology

[@MWAWoodworks]

Yep it's great

[@davidslater5403]

Dream on

[@nordggn]

Can you use any other drill bit sizes other than the 1/8” that comes with the countersink drill bit?

[@MWAWoodworks]

No. However Amana makes multiple versions with different size bits in them

[@mikeleiste6101]

Where did you get the plunge base for the dewalt router?

[@MWAWoodworks]

I have a link to it in the video description 👍

[@jjones2582]

The KZbin chapter breaks are screwed up on this video.

[@MWAWoodworks]

Ah thanks for the heads up!