10 UNBEATABLE Daily Carry Items under $50

[@eylanderdesign]

Jetsetter gets me pulled aside in tsa often but they always let me through . Been to Hawaii, vegas, florida...I hang it on my bag so it's easy to inspect. Scisors are always helpful on a plane

[@joshfenn]

Great to know!

[@bensheeler2395]

If you hand the jetsetter directly to the tsa agent as you load your X-ray totes, they’ll inspect it while you’re waiting and alert the agent operating the scanner. I’ve found it typically speeds up the inspection.

[@eliotbern-a]

I recommend the ChicoBag Sling over the nanobag - because it's so much easier to carry - grocery store, travel, work. That sling functionality makes handling a full bag so much easier.

[@joshfenn]

Not a fan of the sling style for these personally but glad it’s working well for you! Nanobag makes a sling variant really similar to Chico as well

[@jamadail]

Have traveled with the Jetsetter in Europe, no problems so far. Also have the Anker cables for some months now, great value in my opinion.

[@joshfenn]

Good to know for the jetsetter! Anker stuff has always been great for me too, can’t beat a 240w cable for $12.

[@MattTathamis]

Josh! As an EDC nut, this is great timing. I was literally racking my mind on what to get my old hardware store FIL (he is the type of dad you see at Home Depot)

[@joshfenn]

Haha that’s perfect! Glad you got some good ideas for him

[@billricestrategy]

I have taken the Jetsetter through TSA. Only once out of about a half dozen trips was I pulled out for inspection. The TSA guy was fascinated by it and pretty cool about it. So, it's still in my travel kit.

[@joshfenn]

Good to know! I’ve heard some folks have trouble in the past with tsa-friendly multi tools, seems like everyone here hasn’t had an issue.

[@DbackNF26]

I’ve flown dozens of times domestic US with the Vic jet-setter with no issues! I clip it to the outside of my bag. Occasionally it gets a quick hand-check.

[@joshfenn]

Great to know!

[@aalokshah8655]

good idea to clip at end so it doesn’t look like you are hiding something.

[@DbackNF26]

@@aalokshah8655 yeah it definitely makes for a faster and smoother inspection

[@richardmyracle6198]

I have flown with my Jetsetter for 5 years in the US and Europe. I open it and show it at security. No problems. Disneyland did not let me enter with it.

[@joshfenn]

Great to know!

[@mountaingoat1975]

I have a Jetsetter and it is great, no TSA issues. Good to know about Disney, thank you!

[@laoc5270]

Same happened with me at Disneyland. Strange

[@quartzcor]

Quite interesting and refreshing to see some 3D prints mentioned as 3D printing becomes more available and of better quality. You could even do a video on fully 3D printed EDC, would be a cool one to watch.

[@joshfenn]

Got some ideas for dedicated 3D print videos down the road! Working through a huge list of plans now as I learn everything - should be a great time.

[@jeffhaas9577]

That group of 3D printed items is better than a lot of the ones in other videos! :)

[@blezyaugusto9021]

Great list!!

[@joshfenn]

Thanks so much!

[@lynnpage-scott4358]

Yes, took the Victorinox Jetsetter through Edinburgh airport, no issues.

[@joshfenn]

Great to know!

[@burprobrox9134]

I’ve got several casios including some vintage but I can’t live without my phone alerts at this point. I leave my phone in my bag or sitting on my desk. It keeps me on task not having doom scrolling at hand

[@joshfenn]

I get that - if smartwatches work better for you that’s great!

[@dentReviews]

Just a recommendation, I would add a low shelf filter around 100hz and cut the amplitude to reduce the boominess of your voice. Just a thought. Love your videos!

[@joshfenn]

I know I have a low cut in the eq but it’s definitely possible it needs some tweaking. Thanks for the input!

[@dentReviews]

@@joshfenn no worries. not a criticism at all, just an observation. i would raise it closer to 100hz if it's lower... still sounds great though.

[@Iainiesta]

Well that’s everyone I know getting a Nanobag for Christmas! 😂

[@joshfenn]

Haha great idea!

[@townofrockridge]

Jetsetter worked just fine on several domestic flights. Then it was confiscated....by my wife LOL. Great little travel tool though.

[@RagingHamster8330]

😂

[@joshfenn]

Haha even harsher than tsa

[@waggington]

The Full Moon is a great small camera sling for people like me who use their own inserts. I can get my film SLR, an extra lens, and an EDC pouch in there no problem. I use a Minolta Maxxum 5 though, so very small in terms of SLRs.

[@joshfenn]

Great idea!

[@Scarywoody]

Great Video. At this point in the year I can use all the gift ideas you can think of.

[@joshfenn]

For sure! Have some proper gift guides coming up later in the month too

[@LeroyCReed]

I have that watch in cream and it is cool.

[@joshfenn]

Such a fun one, glad to see they’re still releasing new designs worth picking up

[@ssaaffuu]

the watch looks beautiful and you're going crazy with the 3d prints it seems like you're enjoying it and love to see it rad men

[@joshfenn]

Thanks so much! Having a great time with the printer, can’t wait to start designing my own prints

[@harunomiya]

Good selections, thanks for sharing.

[@joshfenn]

Happy to share, thanks for the support!

[@1vitabrevis]

Buy Eberlestock or vertex bags. I love mystery ranch but I’ve had two zippers bust. The one on my hip pack messed up in under 6 months.

[@joshfenn]

Thanks for the tip, I’ll have to check those out!

[@ArnaldoF-f6d]

Wow my guy you just made your own custom EDC thats awesome your quality of videos always exceed my expectations you could start selling that its that good anyway great content

[@joshfenn]

Thanks so much! Had a great time getting the 3D prints together for this one - credit to the designers for such great work! I’m just printing for now but should have my own designs sometime down the road

[@ninjaneil902]

Darn, the orange color mystery ranch bag is not available 😢

[@joshfenn]

Yeah it’s a bummer, seems like it got pulled the next day, presumably out of stock

[@mrblackkai]

I used to have a nanobag, backpack style. Strap broke and they sent me a new one, then strap broke and I didn't bother contacting them a second time. I'll look for something more durable next time.

[@joshfenn]

I had no luck finding suitable alternatives that were equally small. A few others I tried were a bit more burly and durable but ended up being bulkier - I’ll still keep looking but the trade off was worth it for me I think

[@mrblackkai]

@joshfenn I get that. If I didn't have said bad luck I'd be of the same mindset.

[@wendyboyer13]

What color is the mystery ranch pack, I don’t see that one on the link?

[@joshfenn]

I think it was called copper? Stock was low for that one when I picked it up - double checked now and it seems to be gone. Wasn’t on their direct site when I looked either, may have been a discontinued color

[@davidstepanczuk]

Where'd you get that shirt.

[@joshfenn]

Huckberry! Here’s a link to it - prf.hn/l/ngQlb0b/ I also talked about it a bit in this video if you want to see/hear a bit more about it: kzbin.info/www/bejne/o17Ic4eEiZV7f9U

[@j0404t]

Would you say that flannel is true to size or a little big?

[@joshfenn]

Definitely a little big! I got a medium like most f&t stuff and it definitely has an oversized type of fit, by design I think

[@microMobilidade]

Great job with the prints! Those colors look awesome. Nice review on the mistery ranch one, I had been looking into their supermarket bags

[@joshfenn]

Thanks! Gotta check out more mystery ranch sometime in the future, I know a lot of folks really love them

[@alekshudochenkov]

I had Victorinox Rambler (it has knife) in cabin luggage on many flights in Europe. Never was asked about it. I always had it in the bag attached to keys. But I always ready that it could be confiscated :)

[@joshfenn]

So interesting! It seems like there isn’t much consistency with what’s allowed, not allowed, or noticed when flying. Definitely could get taken anytime but crazy to hear it’s gotten through so many times already!

[@slush714]

How is the call quality on the earphones for the other person? I've been looking for an affordable open ear option for taking calls without picking up every bit of background noise like my pixel buds do.

[@joshfenn]

Sound quality is pretty good! I didn’t do any extensive testing for background noise but my wife said they sounded as good as my phone and AirPods would have

[@youknowwithMartyKauffman]

Great video I’ll definitely check out that 3-D printer. Hopefully they’ll be a black Friday sale coming soon on it.

[@joshfenn]

They actually just started the sales recently! The x1c is definitely more expensive as their top model, but the a1 and a1 mini are great too if the budget is tight. Talked about them in my pc build video a while back!

[@youknowwithMartyKauffman]

@ oh that’s cool I’ll look into it

[@someodd101]

Josh, it's that the HB cabin flannel?

[@joshfenn]

It is! Talked about it in my last upload a couple of weeks ago, would definitely recommend.

[@heathwerrett33]

Scissors.of.any kind are not allowed in Australian air travel at international airports. Wouldn't travel overseas with it unless you are ok with losing it

[@joshfenn]

Good to know, thanks for the heads up!

[@sageata_verde]

what if you have medical condition that needs scissors and have a medical bill from your country and translated it with an official EU tranlator in english

[@heathwerrett33]

@@sageata_verde I dont think you would be allowed. could be wrong

[@doubledecker1094]

You rushed through your 3d printed items - please make a whole video going into more detail on them!

[@joshfenn]

Should have more down the road! Didn’t want to ramble on too much but a separate video sometime should be great

[@MrKyGuy]

New subscriber, and big fan of EDC. I did so much research to find my perfect sling bag. Have you heard of the Kargo Gear Loculus Sling Bag? Definitely my EDC carry sling. Would love to hear your thoughts!

[@joshfenn]

Haven’t heard of that one, I’ll have to make a note!

[@MrKyGuy]

@ Awesome! There’s a lot of organization in the sling which was a major factor for my purchase. Definitely a great sling. :)

[@reefebrighton]

My Victorinox Jetsetter was confiscated at Melbourne AU airport flying to Auckland NZ by a pernicious little (he was small) security guy that said "NO SCISSORS". It was my first flight test with it. Great little tool. Wrong name!

[@joshfenn]

I’ve heard Australia can be tough for things like this, pretty sure I saw another similar comment the other week too. Good to know if I’m ever headed that way!

[@ate-ē-ate]

Why does every KZbinr wear beanies and caps inside their perfectly acclimatised house? 😂

[@joshfenn]

Papa google requires it before we’re allowed to upload

[@hoot7588]

😂​@@joshfenn

[@hoot7588]

I think he looks cool. Don't be negative.

[@Pablo_Squivl]

buen video, saludos desde argentina!!

[@joshfenn]

Thanks for the support!

[@Hervelebaba]

Pour ma seule expérience à l’aéroport j’ai déjà eu un couteau victorinox sd classique de confisqué par la Tsa, mais il ont laissé passer le ciseau bebe a bout rond et c’est énervant 😅 on se demande si il détruise vraiment les couteaux ? Ou ils les gardent ou vendent pour eux ? 😮 Bref j’aimerais une vidéo si possible sur des objets edc en fibre de carbone

[@joshfenn]

They’re definitely keeping them! That’s what I assume at least haha

[@Hervelebaba]

@ merci ☺️

[@buffalof6]

Your printed items looked better than most of the commercially available, overpriced edc gear. Seriously! Time for an online store.

[@joshfenn]

Thanks! Credit definitely goes to the designers though, I just found and printed them. Got links in the description for all the prints, hopefully in time I’ll have some of my own designs to share too

[@therob39]

regarding the swiss army knife. at least for europe actually any blade under 6cm (2,362 in) is TSA compliant so the standard swiss army knife classic sd is ok. I took it with me for several flights, but be prepared, that you might hit on a TSA guard, who is not informed correctly and you will lose your knife.

[@joshfenn]

Great info to know, thanks for sharing!

[@ryanv95]

I printed all the exact same things for a 3D printed edc kit but with a different knife lol

[@joshfenn]

Sounds like you’ve got great taste!

[@johnny56g]

Enjoyed your video, I subscribed because you have clean fingernails.

[@joshfenn]

Haha thanks!

[@qwer140000]

Почему он так выглядит будто хочет меня обмануть? Может я уже обманут? Лайк я поставил, пусть ему будет стыдно за обман. Второй лайк поставил что бы не стыдно было мне

[@joshfenn]

…what?

[@qwer140000]

@@joshfenn nevermind

[@kubectlgetpo]

50 is a lot

[@joshfenn]

Quite a few of them are under $20 in the video - maybe I’ll make a lower price point version of the series in the future.

[@SidtheWhistle]

I can't work out the commentary on this video. Is it a script that someone is just reading? AI? ... because you can't have a channel called God of Football, and mispronounce so many names.

[@joshfenn]

I’ve been watching a lot of lions football this year but am far from a god haha. Wrong video?