Am i the only one wanting to hear what that 1000hp V-twin is going to sound like????
@remkojerphanion46864 жыл бұрын
Imagine that engine in a Harley!
@Brock_Landers4 жыл бұрын
That thing has got to sound so wicked!
@Just1Spark4 жыл бұрын
watch?v=zLY7QRPksaQ Sorry, I think this is the flat 4....
@Astra13_Joe4 жыл бұрын
Just1Spark Well the Link doesn’t even work so it’s fine.
@groomlake514 жыл бұрын
TheGiant Gaming you all are wrong🤣 it’s just 2 cylinders worth of the Noonan 4.900 bore center outlaw hemi. It’s a dyno mule to try different combinations at a lower cost.
@shakethaspot63014 жыл бұрын
The two cylinder 1000hp motor was incredible. The flat 4 also. I love engineering like that. Those engines could fit In anything! 🔰
@brentiaconelli64844 жыл бұрын
That's far from small dude! The v twin from supercharger to flywheel is longer than 2 Ls blocks
@Crazystuffyousee4 жыл бұрын
This was one of the BEST and most informative videos I've seen. No clickbait and just straight to the point... Definitely subscribed.
@TheHorsepowerMonster4 жыл бұрын
Thanks!
@22ron814 жыл бұрын
Yep i subbed
@TheHorsepowerMonster4 жыл бұрын
@@22ron81 Thanks!
@JDL164 жыл бұрын
100% agree
@BastardX133 жыл бұрын
So now the V16 LS swap Duesenburg owners have been howling for is finally available! Great job everbody.
@richard18354 жыл бұрын
You would think that in your dreams only you would see engines like these, but these monsters are real and there are some serious engine builders out there doing it. Great Video. Thumbs up.
@TheHorsepowerMonster4 жыл бұрын
Thanks a lot!
@MajesticDemonLord4 жыл бұрын
That tractor pulling engine that was Chrome/Steel/Aluminium was absolutely GORGEOUS.
@SquillyMon4 жыл бұрын
It was never hard to go fast or have big power...when you have DEEP POCKETS... and youre definitely going to need them to play here.
@ronwhittaker63172 жыл бұрын
That's how its always been i asked an old mechanic when i was a kid how fast will it go and he asked me how much money do you want to spend i soon caught on.
@rustedratchetgarage67884 жыл бұрын
Sema =bondo liftblocks and woodscrews PRIS= billet blocks and titanium hardware and lots of boost
@working2bselfsufficient7243 жыл бұрын
Sema sucks unless your a body designer really. Everything is so fake alot doesnt work never was built to etc. Cant stand all the fakeness.
@Brock_Landers4 жыл бұрын
Wow man, I don't even know where to start...I have ALWAYS been into Sonny's engines, but that flat four as well as the V-twin are both really cool. These engines are just mind blowing. Thanks for taking the time to post them all for us!
@boston77043 жыл бұрын
With all this insane billet and CNC machining, i would love 2020s Merlin or Griffon. One can dream...
@mordante014 жыл бұрын
That falt 4 was by far the most interesting engine of the video.
@lukebrennan5780 Жыл бұрын
@@unbekannterhummer5135 as someone who has built hot VW 2175 flat fours, it ain't the same :-) Drooling over it!!!!
@Luda_chris4 жыл бұрын
That flat 4 is ridiculous. Super compact, super light, with a goal of 2000 hp! That's ridiculous! And it'll literally fit in anything.
@metalstorm912914 жыл бұрын
Hold up. That Sonny's Racing engine makes about 153 HP/liter naturally aspirated. That's incredibly impressive. Also, If the Jesel engine lives up to it's hype, the current estimate is that it will produce 1325 HP with a 12000 RPM redline. That's 189 HP/liter, which is insane! Can't wait to hear what that sounds like.
@rolux4853 Жыл бұрын
I’m very confused, that isn’t that much? Mercedes builds a stock mass produced engine with 2.0 liters and 4 cylinders. It makes over 400hp, of course it’s turbocharged. But much more efficient and more power than the engines you praise. And it runs 150000 miles without an rebuild.
@metalstorm91291 Жыл бұрын
@@rolux4853 what's impressive about these engines is that they make that much power per liter WITHOUT a turbo or supercharger. I think the highest naturally aspirated output per liter in a production car is the Pagani Huayra R with 139 hp/liter. I believe the Honda S2000 still holds the record for more normal production cars at 124 hp/liter. Also please check the age of the comment before you reply to it.
@lukebrennan5780 Жыл бұрын
That flat four was BRILLIANT!
@kubbie19694 жыл бұрын
Blower on the diesel is a PSI Screw not a Roots
@ecrusch4 жыл бұрын
Every one of those is a masterpiece!
@Sharkey_t4 жыл бұрын
around 20 years ago someone had built what we today would call a crude version of that v-twin. it started with a keith black top fuel block, cut into pieces and welded back together as a 2 cylinder. brad anderson heads got the same treatment. iirc it ran a 6-71 blower, and it did run on nitro, and made around 1200hp. it was built for a land speed car. i figured this v-twin was either a display piece, or something for another land speed car. interesting to see its actually a dyno mule.
@chrisjones17984 жыл бұрын
That's the holy grail of engines
@peturstefansson4 жыл бұрын
Thanks for the video. It's incredible how the engineers can push out a massive amount of horsepower of their products.
@Ljthe_B.A.B.P2 жыл бұрын
We need more coverage of the PRI Show. Love the video format I've watched this video at least 60 times since it came out. More Pri coverage please 🙏🏾
@brandonhewitt23864 жыл бұрын
I'd like to see that flat 4 in a sleeper VW Bug! That would be awesome!
@savneetsinghrairai68234 жыл бұрын
Ofcourse but with engine everything else needs to be upgraded otherwise bug will be destroyed in seconds....lol🤣🤣👍merry X mass
@gothicpagan.6664 жыл бұрын
Looked super wide, to accomadate what must be a big old crank stroke
@MrSamblomer4 жыл бұрын
we have a similar blown engine in a front engined Karmann Ghia
@cocosloan37484 жыл бұрын
I think that engine is best out-there ! It has great future in any car you put it in!
@hammatime944 жыл бұрын
That idiot asking dumb questions needs to understand that Subaru and Porsche also make horizontally opposed engines
@sicks6six4 жыл бұрын
when power becomes art, this is what you get,
@Platypus_Warrior4 жыл бұрын
5:50 You got that right HAHAHAHA !
@teddyjones80272 жыл бұрын
Fantastic bad azz content, great video Thank you for sharing. Please keep em coming, everyone keep yourselves and love ones safe and healthy and remember to SMILE.
@burtmoore21014 жыл бұрын
Excellent choice's, loved the content, keeps an old gearhead like me in the know.👍 Thanks to all who made it!
@TheHorsepowerMonster4 жыл бұрын
Thanks for the kind words! And thanks for watching!
@jkheslekrants4 жыл бұрын
Seriously Brilliant content! Thank you
@fastmonaro054 жыл бұрын
I LOVE these engines!!!!!!!! Gday from Australia
@psiwog4 жыл бұрын
Gday from melbourne 😁
@fastmonaro054 жыл бұрын
@@psiwog There is always one
@matthewguilford93404 жыл бұрын
It's about time someone made a high performance ej2.5 subbie motor
@jamest.50014 жыл бұрын
Imagine that 2cylinder on a Harley drag bike! Or even a 4cylinder version!
@RalphSampson...4 жыл бұрын
That was my first thought, too.
@Mercmad4 жыл бұрын
The two cylinder test engine is pretty interesting . Here in Australia I knew a guy who built an engine of similar size by cutting the front two cylinders off a Rolls Royce merlin V12 . then ran it in a motor bike.
@TheHorsepowerMonster4 жыл бұрын
I would love to see that! I love the weird things that smart gearheads come up with. Thanks for watching!
@Wabeeninc4 жыл бұрын
Need some modern Merlin engines
@erat914 жыл бұрын
That 16 cylinder engine NEEDS to be in a Hydroplane.
@rustedratchetgarage67884 жыл бұрын
My buddy has a airboat he would love it but im showing him the 1000hp vtwin and the 3000hp flat 4 first due to weight vs hp
@Chris-yy7qc4 жыл бұрын
That thing needs to be in my car. Id sit on the backseats then, so theres enought space for it. Fine for me. :D
@poucxs92464 жыл бұрын
they already did a v16 in a car in 1932, auto union type d > seeing a remake of that one would be mental !
@johndavey724 жыл бұрын
I think that when Rolls Royce were developing the Merlin and "R" engines they ran single cylinder prototypes to see the potential horsepower figures. So to see the "twin" is unusual but not a first. Of course aeroengine manufacturers were pioneers in supercharging and turbocharging .
@watsisbuttndo8294 жыл бұрын
I dont know where it is today but in the 80,s a guy named Lucky Kaiser made a merlin v twin motorcycle from a crash damaged merlin.
@lukebrennan5780 Жыл бұрын
Royce's made "star" engines to test concepts for their 24 cyl X engines and many single cylinder test engines, one of which led to the infamous 'ramp head' in the very first Merlins, which failed badly when scaled to the full size V12.
@andykerr3803 Жыл бұрын
Looking forward to an update... Time flies!
@dadfood35044 жыл бұрын
I'm amazed at how much people are putting into diesel race engines these days.
@whalman5113 жыл бұрын
Damn 1000 from 2 cylinders that’s madness
@WVdavidB4 жыл бұрын
I missed the V4 2.0L V4 engine made from 4 Honda CR500 cylinders. Where was that at? Sigh we 2 stroke lovers can only dream!
@richrinehart10832 жыл бұрын
There are some incredibly smart people out there with some serious cnc machining skills. I showed my brother who is a killer cnc machinist and he was pretty impressed. We have always wanted to build our own cars since we used to build plastic models together. All I need is around 30 million in hundreds and a fire proof credit card because I would be cookin' that thing buying parts....... I want to create my own suspension done with computer controlled hydraulic pumps at crazy pressure levels to react fast enough to control the transfer of weight front to back and side to side..... could be done..... just need some cash.
@davidelliott58434 жыл бұрын
Two stroke diesels are awesome and very clean. A radial four (X) has near zero torque vibration and no mechanical vibration. A twin row is even smoother. All four rods are carried on one crank pin so simple to make. Intake are is blown through reed valves. Exhaust has a variable port height to keep the torque high across the range.
@brendo73633 жыл бұрын
1:42 Love the exhaust manifolds just millimetres from the ignition leads and coils.
@antonyaiken2 жыл бұрын
That's the architectural limits of a 1920s engine design. 99% of other manufacturers had realised 4v heads and OHC with spark in the centre of the chamber and true crossflow designs were superior almost 60 years ago. America will catch up. Eventually.
@K-Effect4 жыл бұрын
I’ll take 1 twin blown V16’s please. Then I’ll put it in the bed of my 1970 long bed Chevy pick up so it’s mid engine-ish. The motors probably worth 6 times with my truck is. I think that’s a good investment😂! Smiles are priceless. Also have a Merry Christmas or whatever you celebrate people.
@ViewThis.4 жыл бұрын
V16 CHEVY = Can't Have Enough Vee Yates
@deborahchesser73753 жыл бұрын
That V16 is a beast. Kind of like a DD 12V92
@jsullivan92383 жыл бұрын
1000 HP from a twin! Hellsakes, I was superhappy to wring out 102 HP from my 1100 CC 92 Virago engine...
@WarpedPerception4 жыл бұрын
Ahh.. I missed the PRI show this year.
@Just1Spark4 жыл бұрын
Its only a matter of time before someone builds an allspark!
@trevoncowen91984 жыл бұрын
Just1Spark Lmaooo 🤣🤣🤣🤣
@RadDadisRad3 жыл бұрын
I want the Tony Stewart Racing 410. Heard it’s the development piece for Fords return to backing racing leagues. Made in Windsor Ontario.
@Perry-ck1hv4 жыл бұрын
I want the big V-Twin Harley bagger build 🤔 Man does this thing Pull😎
@justinmaxwell16084 жыл бұрын
That flat four would keep the old tin top from holding up traffic.
@scotteric87114 жыл бұрын
He who first puts the Noonan V-twin on a bike and lives to tell it, wins.
@elpelon105014 жыл бұрын
This engines look really bad ass !!!
@savneetsinghrairai68234 жыл бұрын
Oh it's really special never heard on v2 1000hp engine...love to hear this massively supercharged beast ...well it's easy to overhaul with just two massive clynders
@kennethwallace43384 жыл бұрын
5:20 reminds me of the real life Rodger Dodger when this guy strapped a train blower to a engine flip the car on it's side leaving the starting line.
@BillyTheSKID4 жыл бұрын
I think they make 500hp on single cylinder yamaha raptors in brazil this is impressive none the less
@fybdrilltime31663 жыл бұрын
The second engine looked beastly 😈
@johnsmith-qz4bv4 жыл бұрын
that was some nice engines and engineering
@breakawaymotorsports4 жыл бұрын
Lord..HP porn!! Now back to my low budget reality..HP is just a crutch anyways..but we all want it!! Minus the blower..that twin would look mighty fine in my old Shovelhead..
@speedcrusader37794 жыл бұрын
impressive engines makes life exciting
@hymanocohann26984 жыл бұрын
The Flat4 guy...(1) open file, (2) open mind...my kidda guy.
@suttonsplash143 жыл бұрын
that first engine is sick!
@Brock_Landers4 жыл бұрын
Merry Christmas buddy!
@mr.blonde17094 жыл бұрын
get ya wallets out, boys.. thanks for the video. love the channel, buddy.
@TheHorsepowerMonster4 жыл бұрын
Hey thanks! And thanks for watching!
@davegriffith323 жыл бұрын
Awesome video! Was that Cleveland Brown at the end? 😂
@suttonsplash144 жыл бұрын
Cool! So much billet!!
@drobusto133 жыл бұрын
I NEED TO HEAR THESE MOTORS!
@suabroboro4 жыл бұрын
Awesome man. Really love your job.😀
@TheHorsepowerMonster4 жыл бұрын
Thanks very much!
@bongosock3 жыл бұрын
I love the idea of the V16/modular LS approach, but you still end up with a looong crank and the issues that entails
@dubsydubs52344 жыл бұрын
Good video, clean and precise, much like those engines.
@TheHorsepowerMonster4 жыл бұрын
Thanks very much. And thanks for watching!
@dubsydubs52344 жыл бұрын
@@TheHorsepowerMonster I subbed too, looking forward to your next video.
@dylanmccanlies67894 жыл бұрын
Things of beauty.
@aloisblazit00532 жыл бұрын
1000 horsepower at 700cc got to be a record
@johnparrish92154 жыл бұрын
The V16 would look Epic with a Tunnel Ram and 4 carbs.......lol
@prachya0073 жыл бұрын
it’s the thing of beauty!
@johncunningham48203 жыл бұрын
Damn . That final V-2 will have the Morgan Owners lining up , cash in hand . Citroen 2CV owners as well I suspect . LOL .
@Micko3504 жыл бұрын
That there my friend is a SH!T TONNE of cash! Hold my Beer I'm gonna find Santa! 🍻
@brackoncorbridge19664 жыл бұрын
More like a glorious mountain of heart warming beautiful beautiful cash.
@savneetsinghrairai68234 жыл бұрын
Yes for the love of such engines require tonn of cash ...ok we will kidnap santa....lol🤣😂merry X mass
@brackoncorbridge19664 жыл бұрын
@@savneetsinghrairai6823 I'm in.
@scottyskydog3 жыл бұрын
Excellent video! Very informative! Ty
@garry3013 Жыл бұрын
Back in the day at the time of Daytona qualifying. They said the cranks were timed 180° past TDC. With different firing order. I thought they were using a flat plane crank some how. They were timed like the Rodeck engines. Giving them a completely different sound. You could here the difference with pull trucks using them. Just something I remember about those engines.
@timewarpvideo62444 жыл бұрын
You would need a hood a mile long to fit that V16 engine into a car, but I'd like to see somebody do it. Nice!
@johnparrish92154 жыл бұрын
Hmmm.....a Hot Rod Duesenberg perhaps?????????
@MistrMcGill4 жыл бұрын
I'd sacrifice the firewall just to have one under the hood 👍😎
@aaronnicholson84704 жыл бұрын
Welcome to 1931 Cadillac!
@mrmarshall15064 жыл бұрын
Put that behind the cab of a 3500 70 chevy with a semi wheel conversion , but instead of dual wheel make it a fat slick!!!
@ViewThis.4 жыл бұрын
@@MistrMcGill Sacrifice the firewall. That will work. Just carve out a nice hole and build a cover over the part in the cab.
@raymiles6913 жыл бұрын
Steller Entertaining Another Planet🚀😯?!
@generalsandnapoleon4 жыл бұрын
Great stuff, Jeff!
@TheHorsepowerMonster4 жыл бұрын
Thanks! Much appreciated!
@ViewThis.4 жыл бұрын
Is there an Emoji to express my drooling?
@sprintmademe4 жыл бұрын
Would love to have known the torque from the diesel. The flat 4 and the V-twin were the most impressive with power output. Did anyone else hear Cleveland Brown from Family guy in the last one with Darrell?
@savneetsinghrairai68234 жыл бұрын
Wow this is like a X mass present from Santa.....so clean precise engineering Marvels of modern world Wish I had it all ....anyway thanks for sharing master pieces...Merry X mass
@BIGGELATO4 жыл бұрын
Behemoth sized megalodon dinosaur shit right here bro god damn
@ztwntyn84 жыл бұрын
Great stuff/vid. Now I Jones to hear/see them run!
@kevincollins21844 жыл бұрын
1000hp v twin I know some crazy Harley dudes that would love that dyno mule for they're bikes
@Ozmandius4 жыл бұрын
For they are bikes? Wut?
@kevincollins21844 жыл бұрын
@@Ozmandius yes sir I know a few cats that would put that engine in a bike frame without hesitation. Granted they might not live long afterwards but they'd do it
@RalphSampson...4 жыл бұрын
@@kevincollins2184 I thought Harley, too. But, how in the world could you get it to hook up? The tire would have to be 48" wide! Furthermore, could you get enough weight on it to stick it to the launch pad?
@kevincollins21844 жыл бұрын
@@RalphSampson... I'm sure it could be done I mean look at nitro Harley drag bikes some of them make around 1000hp and guys have figured out how to make those hook and book, granted I'm sure it wouldn't be very pleasant to strapped to though.
@RalphSampson...4 жыл бұрын
@@kevincollins2184 Lol....strapped to it for one last final ride?! Pleasant? You would never feel the pain.....just pure thrill and adrenaline and then, final resting time. Not such a bad way to go. A bit morbid for 2 days Christmas, huh? Merry Christmas, Kevin. I hope you gave a good one a fantastic coming year!
@sprintcarguy034 жыл бұрын
I love sprintcar racing
@boltonky4 жыл бұрын
There is some crazy machines coming out as they fight to keep petrol etc in the game, what concerns me is what use 98% of high performance engines have in the modern day.... I love HP but there is no use for it except on the track or closed courses until people are taught to drive without technology to save them. Great video BTW :)
@1STGeneral4 жыл бұрын
Is the Prius channel down again ?
@tomhamilton91404 жыл бұрын
Thank you for the new ford sprint car engine. Would loved to see thee 351 MMR 4000 HP Ford Mod motor on display.
@TheSteve11754 жыл бұрын
Hey, my first time to see your channel. I liked and subed. 😁
@TheHorsepowerMonster4 жыл бұрын
Thanks so much!
@erikbergstrom2584 жыл бұрын
looks at The two cylinder 1000 hp motor. looks at harley well if i move that and that maybe hummmm.....
@shanek65824 жыл бұрын
Wonder if that first bad boy would power a p51 mustang like the Merlin
@spar83344 жыл бұрын
Didn't see one thing in this video i could afford
@spar83344 жыл бұрын
@Dan W unfortunately not looks like one those dysons or other high end fancy vacuums that cost more than the engine currently in my truck 😂😂 maybe they'll let me buy one those engines 1 bolt at a time
@johnparrish92154 жыл бұрын
If you can make a 90 degree drive for that supercharger, then that V Twin needs to be in a Bike!!!!
@TheHorsepowerMonster4 жыл бұрын
Or the world’s fastest moped!
@ur_quainmaster79014 жыл бұрын
Mount it the bed of a boost loving diesel and just have the vtwin drive the procharger.
@dinadaughtry89932 жыл бұрын
No I would love to hear it to be awesome on a mini rail!
@rhawk24244 жыл бұрын
Super cool that companies are taking this seriously and upping technology to a new level. This stuff will be affordable when I'm too old to race. But imagine what will be out in 25 or 30 years from now? This stuff might be in production cars! And I noticed there were no electric prototypes, what gives?
@TheHorsepowerMonster4 жыл бұрын
I think there were a few electric offerings at the PRI show, but I believe I walked right past them without paying any attention. Nothing against electric, but personally they just don't do much for me yet. Thanks for watching!
@-MacCat-4 жыл бұрын
At 9:00 did I mishear what was said or ..... Aside from that it was a fun post to watch and see what the "big boys" play with.
@RalphSampson...4 жыл бұрын
Yeah. What the hell is a "clamshell style cam"?
@ninablatchley8424 жыл бұрын
That 2 cylinder would be cool in a SXS or Crazy
@lorddragonus87484 жыл бұрын
That blown Wagler diesel isn't running a Roots blower, that's a twin screw.
@TheHorsepowerMonster4 жыл бұрын
You're right.
@vmaxes4 жыл бұрын
Great video!
@TheHorsepowerMonster4 жыл бұрын
Hey Thanks!
@mr.r594 жыл бұрын
I would love to put that in my ram 1500.
@GeoHvl4 жыл бұрын
Volkron would make a hell of an Air Boat engine.
@jakessmallengines4 жыл бұрын
Headers to close to coil packs and plug wires .. Nice motor !