1000+ horsepower turbo 4.6 2v first start

[@EPICYELLOWHORSE]

I did a similar build 6yrs ago on my 2V. I used MMR'S 5.0L STROKER, MMR fuel system, Elderbrock Victor Jr. Intake, Twin turbo kit from HP Performance (2 - 50mm t3/t4 hybrids). Trick Flow Heads with MMR Stage 2 turbo cams, MMR 8 quart oil pan, Cloyes timing gears, Pro-M MAF sensor. Accufab throttle body. SCT handheld tuner. ***Anyways, the car made 725rwhp on 18psi due to a mild initial tune.*** I went through 3 tranny swaps before finally getting a TKO 600, but I could never keep a clutch in it for long, and the shifting was really knotchy. I never hooked up the 2-step, but the car went 11.20's at 126mph on foot brake. I had it tuned on 110 octane fuel. To make a long story short, my new wife and I were expecting a baby boy, so I sold the car for pennies on the dollar. kzbin.info/www/bejne/Y4vPpYSCo8ege9E 😪😒🤧

[@anthony1bad351]

Hey man, from one joy to an other.. congrats brother..

[@EPICYELLOWHORSE]

@@anthony1bad351 Thanks my Brother! 😎👍🏼

[@joshireson5457]

This is what I have notifications on for!

[@n3xusDubstep]

what an amazing couple of months watching you put this motor together, kick some ass 🤙🏻

[@bullitt27382v]

hell yea! nice to see it running again, 7 seconds or bust!

[@jasoncameron34]

Sounds awesome Andrew great job. Love that idle you can hear the Eagles sore

[@wellthatdidntwork]

Yes!!!! She runs again! I know that's a good feeling and I'm happy for you brother!! Cant wait til shes dialed in and is able to hit the track

[@lilcee7649]

The cobra’s big little brother lol

[@stevewelborn8744]

That's badass. Sounds great. Once you got your block you've been getting it. Thanks for making time in the middle of this mad thrash to make some videos.

[@armstrong_justa2v513]

Damn this thing sounds insane!!! I can’t wait to see how much power it makes and how much faster it’ll be now! Great job!

[@turbocsabi]

Congrats, brother.... Exactly how I imagined it !!! Now go and enjoy the f..k out of it..😀😀😀 and again...Thank you for sharing all this 2v heaven with us.!! Much appreciated.! 😘

[@eternalcowboy585]

Glad to see it all worked out in the end!!!

[@MrDavidelliottjr]

Omg. Just listen. One of the meanest sounding little motors

[@closedeyeslie]

When you take the biggest underdog of an engine and make it better than then almost anything you will pull up next to at the red light. Props for this build its badass!

[@Kb_2v]

Every time an old vid pops on my recommendation I just gotta watch it again 💯

[@justinm6110]

Great job bro, your channel is gonna blow up, not enough 2v luv out there, cant wait to see this car kick some ass again.

[@zombieracing4522]

Glad to see and hear this beast going fri I'll be at track first time in long time but 4.6 2v all the way my friend

[@DaFrostyG]

Beautiful. Been following for a good while now just beautiful.

[@99naSvt]

Sounds and looks good...curious to see how fast that 2v will go

[@tomkjr1]

Stubborn but strong! Good Luck my mustang brother.

[@tillman40]

The competition is now on notice!

[@taddmason1187]

After all the hard work and heartaches she is finally running

[@Anthony-vr3um]

Holy cam!!!! glad it's running!

[@lpssamanthayt8361]

That’s so awesome that your wife is out there helping you that’s your soulmate that’s what I’m looking for Still haven’t found one

[@ChrisfromGeorgia]

That's the only one I have ever seen. Rare creatures they are.

[@squanchysquanch7525]

Sounds like an animal! Mustang lifestyle needs to take some 2v notes on this build!

[@jacksonstorm6395]

Very happy for you Andrew ( and family ) . It took a little longer than you wanted , but I think you will be very happy with this combo. Best of luck to you , and can't wait to see you send it for real.

[@DenverMajid]

Congrats Andrew for the 1st startup after having the engine all together. Can't wait to see it at the track and breaks 7's seconds.

[@BoostedZinc]

Been watching you build this monster! I Love it. I have a 01 GT on an 0n3 single making just over 500 to the wheels and your car/channel motivates me to keep going cause i see what my car could/will be! Keep up the work man and go kick some ass!!

[@QZPZ]

Engine mods?

[@BoostedZinc]

@@QZPZ yeah I have forged rods and pistons

[@MrDavidelliottjr]

Showing the world the 2v can hold power

[@forrestgumpv9049]

Sweet !! Never sell it. Drive and enjoy your hard work. Thanks for taking time to share it with us. You just don't see this anymore.

[@texasinnovativeperformance6439]

2v too the front great video hope to see you do some no prep racing

[@ClashroyaleUAE]

7:50 “good thing I’m deaf in that ear already goddamn” 😂😂😂😂😂😂

[@mugivermusclemachines5744]

What a relief it must be to have that motor in and running!! 7's 4-SURE!

[@jacobchilton188]

Looking good man cant wait for another video to drop lol

[@electrochubb]

Sounds great Andy, no smoke.....get a few dozen easy miles on it, after the oil change it's time for the track.

[@cfrank925]

Congrats on getting the car running!

[@CarlosMontalvoGhigliotty]

The beast has been awakened! The engine sound good! Happy for you man! Now time to tune and start the LS diet! Hehe😬

[@PureCountryof91]

You barely have a single factory part in an ls to make 1k...

[@CarlosMontalvoGhigliotty]

I really do not have a single factory LS, Reason is I don’t like LS engines. Don’t have nothing against them.

[@PureCountryof91]

@@CarlosMontalvoGhigliotty i am more fond of modern engines.. The LS is a cheap engine in every facet.. The ancient design is not desirable to me at all either.. But im working on acquiring a barra anyway..

[@lpssamanthayt8361]

Car sounds awesome just took a little while for the lift is the pump up and it was real tight fresh motor but it sounds awesome

[@ecrwarren]

Great stuff man, can't wait to see you make some runs in it.

[@kunalsing8164]

You have no idea how long I have been waiting on this video. Congrats buddy! Go kick some ass on the track now!

[@gprice932]

Congratulations! Sounds like HEAVEN!

[@barrymccockinner842]

just watched this whole build. Have same engine in my 03 f150 going to attempt the same build

[@davidrogers1410]

Your girl is awesome buddy a keeper for sure.

[@lofiseeker1790]

What a beast! I plan on getting one but only putting about 400 to 500hp

[@golpherboy13]

2V FTW!!!🔥🔥🔥

[@ghostman9251]

Congrats on this build I'm working on a 2000 GT with a vortech blower not even close to the power of this bad boy. Time to smoke all the 2v doubters.

[@chuckford4393]

Build the bottom end and you can bruh

[@seabiscuit5293]

Man, i thought you looked familiar. I went to middle / high scool with your brother devon

[@RaggedyRacingGarage]

Sounds bad ass. Love my 4.6

[@Viravongdominic]

Love that you had the woman jacking up that engine. Like a gent!

[@harrytaylor6081]

Can’t wait to see it at the strip .sounds great 👍

[@marklowe7431]

Love the setup design. Nice work.

[@Frosty4370]

Awesome!!! Way to go Brother!!!

[@LowMedow]

Good to see something else other than LS.

[@randybachman1075]

Cant wait to do mine man.. Sounds like a beast!!!

[@mikej5131]

BEAST MODE ENGAGED!!!!

[@mwhitelaw8569]

Very nice Andrew Been watching you and this car proceed through your ongoing addiction. And it's lovely And ma'am 12 o'clock at nite Is the best time for that kinda noise

[@autechrefan1395]

Long live the 2v!

[@thedobermangang3503]

good video my brother i got 2004 maruader i cant wait to do my engine

[@donalderdbrink647]

💪👹 ITS ALIIIIIIVE!!

[@CarlosPerez-rp1qy]

Weautiful 2v ford power baby✌💪💪💪

[@jacobgomez2682]

Nice, doing my 4v here shortly

[@Questchaun]

Wicked brother 💪👊

[@helomech74]

If you ever need help with anything while I'm home on break let me know. I'd love to see the car and help out of I can.

[@linoacuna7230]

Sounds great man.love it sweet set up

[@johngrabowski2957]

Sir if you started that crap in my neighborhood at midnight?? You’d have one extremely crochety old man in your driveway in his underwear and boots,,, handing out beer!!! Lol. Funny thing is, I probably wouldn’t be alone. Congrats!!!

[@ziad123bakkich2]

4.6 2v: 1000 hp 2jz: hold my beer

[@CayPvP]

Ziad123 bakkich ford modular > 2J

[@CW-cd6uv]

All I can say is wow!!!

[@tpalm88]

Nice man!!

[@stlrepper711]

Inspiration certified💯

[@WinWin-mw9xz]

i like this, keep it coming

[@danadamczyk3295]

Liked and subscribed for this build. Great looking car sir

[@thehappytexan]

Heck yeah!!! The quest for 7’s is on baby!

[@beeant460]

Sounds good man!

[@bluntforce8749]

Dam that mustang is clean asf

[@MikeMiller-fc2cc]

BADASS MAN!!!!!! When that engine is idling , it sounds exactly like a pro boxer on a speed bag. best sounding engine I've ever heard,!!!!

[@schleybailey]

"good thing I'm deaf in that ear already goddamn"

[@bodyshotjake7475]

Oh my my my.

[@silentshredr]

Great job, your wife’s quite the trooper also.

[@durrell292]

Congratulations

[@SAY10650]

Wow goals bro I’m trying to do that to my 4.6 to

[@mikehunt7483]

Whoooo 🏁🏁🏁🏁

[@firechicken7940]

Next time you need to pull the motor and transmission message me I'll hook up a fellow racer,we've meet at the track before and I have a lift making working on that car faster and easier 🇺🇸👍

[@egblackj32]

What intake manifold is that? Never seen one that has the throttle body going straight? Love the build too!

[@glennmassengill3532]

NICE JOB! Bet the neighbors love ya lol

[@fiascoracing5089]

Is this the same block in the 1999 f150?

[@2vgod460]

Brother you had your comments off on the engine building video. I NEEESD YOUE HELP BRO!!!! WHAT lift plate did you use to mount your teksid block to the engine stand

[@luciankristov6436]

Dear Jesus God it sounds glorious 😍

[@JeffScrambler]

Congrats

[@zombieracing4522]

Sounds bad ass

[@MalcolmGrantShow]

Hey man I have a 2000 mustang 2v as well. Everything stock. I need to know what the 1st mods I need ? Any advice? Should headers be 1st ?

[@johnhogan3978]

I just bought a cheap 93 Lincoln Town car and it has the 4.6 2 Valve and I'm thinking about to turbo it like your set up. What would you suggest I do or don't just lmk.

[@modularperformanceracing1799]

Best 2v

[@sp1epiphany]

I’ve been watching a lot of your videos. I absolutely love the build and your cars. To be honest I’m going to 5.4 swap a 96 to 98 car. I’m pretty sure I have the route I’m going to go. Witch will include heads cams intake tb and plenum. I’m sure I’m go turbo as well I wanted to go nitrous but the cost of fill per bottle is outrageous now days. You can check out my Mach on my channel if you ever get a chance I just wanted to build something different instead of building that one more.

[@waynee2638]

You do nice work! What provisions if any did you have to do to use the teksid block? Thanks!

[@yungbiz9244]

I wanna do a similar build to my 02. Saw you machined the block but is that the stock block and did you have to cut the subframe. Trying to keep the body in tact as much as possible in case I ever want to put it back to original.

[@kyletaylor7931]

I’m looking for a cam option and if you have any insight on how to find a good option I would appreciate it. It’s a 4.75 stroker long block by MMR. Has Steve 3 nitrous cams, stage 3 ported heads, P1sc and stock intake. Any direction for me? I’d like it to move a lot of air with higher rpm. The tire burning tq is less appealing as riding out a gear and putting you in your seat.

[@lowbornfabrication]

Beast.

[@Gear_head11]

Any tips or procedure you'd recommend for seating rings? Finally getting close to starting mine for the first time

[@librawarrior8527]

did he pre oil it!???? no oil on the opposite head from the fill spout or in the lifters??

[@johnlingo3834]

You moved all the reservoir tanks and battery to the trunk?

[@benjaminrivera117]

I always wondered if it's the same engine as the 03 f150 4.6