1000+RWHP C6 Z06 - YSI Supercharged RHS 440ci (Build & Beauty) by Vengeance Racing

[@kurylajarod]

I don't know what was better . . . The build itself, or the video. You guys are world class. Keep up the good work.

[@dareuslomas94]

God I can watch these guys build motors all day. Also I'm learning while watching. These guys are good. Bad ass Vette!!

[@Shad0wC0mpany2]

Q'Dareus Lomas I was doing the same thing- LEARNING AND 🤤

[@l6echo53]

one of the nicest and cleanest z06's i think I've ever seen. Great filming too. Thank you for sharing!

[@DjTechnotics1]

This video has inspired me Soo Much, I Own a 2006 Corvette, I Blew the motor over 1 month Ago, over a bad tune or something mechanically went wrong, I Dynod at 636 Horsepower with only 5 psi with a V3 vortech supercharger & E85 , I Watched this video literally over 60 times, It inspired me so much that I Ordered a 370 Iron block fully built with K1 Rods K1 crank By thomson motors, Arp Studs all around and the big Upgrade to a A&A Ysi Blower, Aeromotive A1000 Fuel system with 1000cc injectors, American racing headers, England Green Boost Cam Mayhem 2, Ported and polished heads, LSX 102 Intake manifold, Stage 5 Twin disk Clutch By Spec. I Have everything already in boxes ready to install, Engine arrives next week and I'm Super excited to see what the numbers will be now. Thank you for inspiring me On my Own Dream Vette. Video will be up Soon.

[@DjTechnotics1]

Mine was a LS2 Engine pal

[@DjTechnotics1]

ill be Dynoing it in about a week, car is up and running =D

[@3O2MuStAnG]

Rich S. Did you have stock heads? What year is your Z06? How many miles?

[@DjTechnotics1]

just an Update, My previous build made 1005 HP 900 TQ, Now im building an LSX BLOCK And chasing after 1300-1400 HP

[@helliondevil132]

DjTechnotics1 what are you using to achieve your 1400 goal? I have a ls7 with a ttrim looking into getting a YSI. Thanks in advance.

[@rekjavicxxx]

Wow, just so much put into this project on every love! You guys once again go above and beyond

[@EJ257IHI]

+1 @5:35, if you look at the graph, near peak torque value at peak horsepower. You don't see that too often.

[@JayRussellDuramax]

@@EJ257IHI That's actually quite typical for centrifugal superchargers. Check out any of the ProCharger builds on Steve Morris's channel. I think it's because their boost curve isn't linear, so the torque peak reflects that. If they had a linear boost curve, they'd make peak torque at a lower RPM.

[@steveorules6262]

My opinion the best looking generation c6 z06 made..Beautiful car, beautiful work.

[@fulltiltboogie5321]

Watch this video many many times!!!!Simply BAD ASS!!!!GREAT JOB!!!!!

[@RobHTech]

You guys make/have some of the best videos on KZbin. Not only are you guys really awesome at what you do, very knowledgable, expertise. I'm not sure who makes your videos, but they are really good.

[@AMGWagon]

Bad ass car and bad ass video. Perfection as usual 👍

[@setunedouche]

I've watched this vid many times.... Love what you guys accomplished!! Thanks for sharing!!!!

[@choward874]

Man you guys are impressive! The guy below me hit the nail right on the head world class videos and work! I love watching your videos you guys do phenomenal work!

[@robertlarson5628]

Beautiful car!!!! I wish I had the money for something like this.

[@JavierTorres-py6rp]

I like this version of this tune. Nice.

[@javiertorres7970]

All that and good music too. Wow.

[@AC-kp8sp]

quality n craftsmanship!

[@bluestreamde6114]

This video Makes me want to get my own Vette!

[@TOMBSTONESTAN]

Just Beautiful!

[@ahmedabdulla8616]

beast keep theses videos coming

[@victorjr100able]

Just the intro and I’m already 🤤

[@bobbybabcock36]

Awesome video! love it

[@Vic_714]

beautiful. just beautiful

[@Just_a_gamer48]

Beautiful car !

[@willthacker5182]

Def a legit corvette!

[@YELLOW08Z06]

Amazing build

[@vettenutt0534]

I would have been crying at the end if i were that dude

[@chrisbaxter40]

the calibration with do it with Dan can't wait

[@TheeAmateur]

amazing work gpod job!!! 👍

[@richardjones990]

Beautiful job. Performance like that in a beautiful show car. What else could you ask for?

[@stewiejohnsons6797]

+Richard Jones You will see this car racing at the Georgia 1/2 mile in May

[@foxxrider250r]

at least 50k in parts!

[@na-i6]

you get what you paid for

[@willieoutlaw8731]

Truly fuckin Beautiful

[@muellerpk]

Give VR your stock z06 and 60k and you get this

[@RyanTebow]

song: Chiyana by Audion (Instrumental)

[@goliath5304]

Perfect....

[@ramiroramirez9941]

Must be nice to be a technician at that shop

[@Power_Tech_TV]

Sooo Sick!!! i need to drop off the Cherry Bomb G8 and let you go nutz.

[@lazarusck6303]

Amazing! Can I ask how much it costs to so the upgrade from stock ? I'm would love to send you my c6 for a GT2 Loma wide body installment and this type of upgrade!

[@swappedoutZ71]

Probably like 30 grand lol

[@JayRussellDuramax]

The best way to do this is to not start with a Z06. They used a completely different engine, so, you could have this done to a base C6 and have it a LOT cheaper.

[@sierravmax]

I am in love.

[@terrywix6844]

Damn beautiful. Black Beast or Black Bullet...

[@Parabloop3r]

But can you show the dyno graph from 2000rpm instead of 4000? :P

[@mohammedyousif4994]

👏

[@Alex-pl1ye]

how much is this exact set up

[@fcporto400]

I would pick a vette over a Ferrari lambo Bugatti pinto mclaren.... z06 is my dream car

[@MrMrhouston7]

What are the cam specs please?? Trying to find this one !

[@allenhook953]

Man I love that. Instrumental. who song is that

[@anthonybrisbane7755]

Super NICE

[@SAVA47-00]

Is that on pump gas or e85?

[@John-qz4cv]

How much for that set up?

[@fcporto400]

5 stars ⭐️ how much for that set up

[@PosiRearTV]

With lower compression,proper cam,and twins what would this engine push out approx?2000+ to the wheels?

[@FixItStupid]

I Noticed The Same Thing The Compression Ratio Is Too High... To Get Enough Oxygen Stuffed Into It..... Some Engineers Just Don't Know How It Works

[@leandrodias2050]

ShifTEE Ali The owner probably wants a streetable car, that's why the compression is that high

[@JayRussellDuramax]

@@FixItStupid The compression ratio has nothing to do with how much air goes into the cylinders... That's a function of the displacement of the engine. This is a 440 CID engine no matter what its compression ratio is. If you can get the engine to not detonate, higher compression is always better. Lowering the compression ratio allows you to get away with lower octane fuel, but you lose efficiency. If you want to drive the car on pump gas, you'll likely need a lower compression ratio. However, if you're using Ethanol, or another type of high-octane or equivalent fuel, you don't need a lower compression ratio to keep it safe.

[@joshposey9155]

Seriously would kill to know the cost for this exact set up all the way to the hood and steering wheel. I have a yellow 08 z06 and want this build. Will pay cash just let me know the price. I live a little north of your location about 50 mins away

[@chrismason1573]

Whats the cost of this build ?

[@80KG_Costco_Chicken]

Can some one pelase tell me what hood that is.....

[@shawncarr8035]

what crank and head unit pulley did you go with?

[@shawncarr8035]

+RonatVengeance I noticed you used carbon fiber valve covers in the beginning of the video and then switched to your branded valve covers. Are the carbon ones available? If so, how much? I just went with All pro 12-4 heads and need valve covers. Thanks

[@richardjones990]

+Shawn Carr those valve covers look like Katech CF cover that they sell.

[@shawncarr8035]

Called them. They don't make them anymore

[@stangbang100]

+RonatVengeance what's the exhaust setup on the car? I can't recall you guys sharing that part. Thanks in advance.

[@LBigJake14]

What I love most is the owner looks like a bum lol

[@angelo_giachetti]

Whos car?

[@thanosmanolis7783]

Anyone knows the music?

[@marciovallew]

Song name ?

[@80KG_Costco_Chicken]

The owner is exactly what most corvette owners look like😅😅😅

[@mikkeazy]

what song or instrumental is this?

[@mikkeazy]

+gearheadflicks thank you

[@TunedbyMMT]

How much boost?

[@FixItStupid]

Can't Be Much, With That Static High Compression Ratio

[@erichunter2108]

Badass build, no expense was spared with that car... Best of everything! Sucks the owner seems more into waxing because that car would make a killer on the track. Why do all that work to just throw nitto invos on the car?

[@jerzeydiablo]

+Eric Hunter I've had a "track guy" ask me the same question last season. My question to you is, what tires would you use? For use on the street of course...

[@cali2468]

+Benito Ajo I run NT-05R 345/30 drag radials on my C6z.

[@cali2468]

+Benito Ajo 19"

[@jerzeydiablo]

Drag radials on a street car? Seems pretty unsafe.

[@cali2468]

+Benito Ajo They actually perform quite well on dry pavement. None of my vettes ever see rain anyway.

[@Hogwarts-Dropout]

What kind of main and rod bearings did you guys use, bi-metal or tri-metal?

[@javiertorres-bb8lf]

So strange. I've commented twice on this video. Nowhere to be found. You Tube.

[@ericsmith5214]

Check out do it with Dan... I'm one of his subscribers and these guys are awsome

[@MrSmokin04]

How much $$ did that run the customer out of curiosity?

[@speedlife301]

MrSmokin04 easy 50-60k

[@vettenutt0534]

Where is vengeance racing located ?

[@jessemcdougall-douglass162]

TX

[@eaglewingadv6384]

sick diwd sent me

[@z0612]

440ci? I see 4 and 6 cylinders making 1000hp and more??????? I'm confused. .

[@1Chimera300]

z06 1212 from a reliability standpoint, how this car is set up is pretty conservative. Yea it’s a big ass motor but it basically only has 7 psi of boost and a cam from the looks of it. My guess is the owner wanted to keep it reliable but realistically yes that car is more than capable of 1400+ hp.

[@3O2MuStAnG]

z06 1212 5:35 it was actually 1036rwhp (approx. 1250hp) and that's on a street tune. There are 1000hp 4 bangers and V6 but a big built V8 will always have more power out of the hole (torque) and be more reliable. Obviously you can get more power (there are 3000hp Corvettes) but first of all what's all that power good for on street tires? Also the engine would need a rebuild every few running hours. That's just not worth it.

[@speedlife301]

Look at the power under the curve on a blown vette on low boost and a 4 banger with a turbo the size of the engine on kill blow my engine up mode 39-48psi and come back.

[@carstenaagaard2825]

Man...

[@evanlikestephen4441]

doitwithdan

[@emadaaaaa9102]

Man half that coast with 2zj and it will fly

[@Charlesbjtown]

Twas all good.... till I seem that hood.

[@HP.Customs]

Good way to spend 65k.

[@hythekiller]

What does this cost all ? 50000? made for rich client... :-(

[@3O2MuStAnG]

hybmwfreak This build makes the Z06 one of the most powerful street legal cars in the world. Do you really expect this build to be cheap? LOL

[@Mrquartermile]

They are one of the top shops. They don’t do cheap work. It’ll be expensive for a reason, top shelf parts. Builds at the level aren’t for everyone.

[@Retired70]

The music is a turnoff

[@JETKILLERadw]

Song Name?

[@DjTechnotics1]

Lovesick Instrumental by Joey miceli