1000HP AWD Civic Gets a Motor and 600HP Stock Sleeve GSR Makes Some Jam

We continue work on the 1000HP AWD Civic and dyno a Stock Sleeve GSR Turbo Hatchback and it makes over 600HP. We also continue working on the budget build DA Turbo Integra. The Hatch is owned by a customer who drove all the way from St. Louis Missouri and we were happy to help him with his project! He'll go home knowing his dream car rips!
--------------------------------------------
-- BUY YOUR HUMBLE MERCH BELOW! --
-- shop.humbleperformance.com --
--------------------------------------------

[@bradshotya]

Best Intro on KZbin i swear

[@austinbunger5483]

FR FR!!

[@BvtecturboEKHATCH]

Whats the best plugs to run on my B20vtecturbo I know cold but the guy from Advance Auto give me a 240sx plug something -8 and-11 ngk laser plug it doesn't look right but I put small gap and it's running like hammered hound dogs dick until vtec kicks at 4800 and boost 5000 did alittle something something to the Intake compressor side was 5500 when full spoiled i only have on 9 psi with 450cc injectors stock block and all but monster turbo when it was on 16 psi it was fast I ran 13.8 just b20z know it has all that one at a time CTR HEAD then turbo kit and i smoked a gsxr750 But I been sick so I get once in awhile to mess with it sometimes it's 2 months full accell ignition 10.5mm wires also I ordered a new map and iat waiting on them to come in if I wasn't recovering i would be ok please lmk

[@dylanpope9162]

About had a aneurysm with the lack of punctuation haha

[@JozifStorm]

lol was thinking the same thing

[@JoseTorres-us2jt]

FALO IS BY FAR A MASTER ENGINE TECHNICIAN ON THE LOW. YOU CAN CLEARLY SEE HE HAS A PASSION FOR HIS CRAFT

[@AJIMPORTS]

The top three source on KZbin for AWD Honda builds are humble performance, young static and St tuning. Can't wait to see these builds completed.

[@operatoncreation6396]

love this channel... thanks for narrating stuff. learn a lot from the videos

[@rogerserafin]

I was getting Humble Performance withdrawals ! Thanks for the video :)

[@dom-cee]

The absolute best intro on KZbin!!!!

[@pFbSpecV]

Coverage on these builds is awesome! Well put together

[@MackDolo]

watching the engine being put together was so satisfying

[@riyuiwashere]

Humble FTW!

[@carribean660]

All around great work.👍🏾

[@Rick-fs3ki]

Great videos love the shop work footage ✅🎥

[@hollowsquadS51]

This was so therapeutic to watch.

[@Nyc007bangerz]

Humble always doing it up nice! #bseries4life

[@jimhiscott2918]

I see so many who put the coil on plug on b series engine and they always seem to constantly have issues with them. Run a dragonfire distributor and never look back. No more issues.

[@garywhite3209]

Love seeing you guys make these Honda's badass. Can't wait til it's time to make the trip from OKC to Tulsa to have y'all tune that bitch!

[@shionnsr8684]

cant wait to order a b series long block to be built real soon :)

[@MrZeroLag]

What C.V boots and clips do you use on your axels mine keep splitting. Thanks

[@crtinkering7323]

At the beginning..I was waiting for his sleeve or wires to get caught in a timing belt LOL

[@simplybuiltgarage]

What transmission they running on this and setup

[@ScorpioXXXL]

I love this channel. It's inspired me to boost my EG. I can't wait to gap my coworker... Lol

[@4banngerfa591]

They definitely do some Quality work man would like to buy a built motor from you guys

[@keventraub5098]

Never knew that about l19s Good video guys

[@accorddynamic244]

Wats the head on that bseries turbo eg

[@tegnando2697]

Teg from TX sick

[@michaelrandrianarivelo6593]

Weld the tip of that Intercooler piping! Its sketching me out 😂

[@samuelmontejano3815]

That intro.. Nice

[@Khandreaa]

What size turbo and charge piping? Trying to do an experiment

[@radameslopez8200]

que turbina tiene la civic negra ?

[@MichaelMiller-tc2os]

Hey how you doing my name is Michael Miller big fan of your page I was wondering if you had ever found out the problem with the Skunk2 throttle body are intake manifold cuz I guarantee was I didn't over 2000 RPMs are even more I wonder what you did to fix that situation because I have the same problem

[@boostedalex2380]

Do u know if it’s been pretty reliable on the stock sleeves ?

[@gt3tunecl725]

Lo mejor del video, es que hablan en español y así se entiende mucho mejor algunas cosas del tune y armado. Awesome intro!. That black beast Uff. Una pregunta, ¿de donde sacan la linea de aceite para el turbo?. Colocan un sándwich al filtro de aceite o perforan otro lugar del block. Gracias!

[@alexxiong4647]

What size intercooler was he running?

[@SpeedomusicSM]

How are the sleeves holding up

[@Turboobsessed]

What camera are you using?

[@johndaen6853]

2020 i get my car built by HUMBLE PERFORMANCE. IT WILL HAPPEN

[@Ayang1125]

Those look like cxracings ram horns. How are they?

[@shombiedixon4136]

Gsr...yes sirr

[@stopspin]

Would like to see how this car performs as time attack car or road course car? Like the colour you guys chose.

[@ivtec845]

Is the awd car your car ( camera man" or a shop car? Why 2.2 instead of 3.2 for cams?

[@sharifkhan3815]

jow 30k sub coming soon blood

[@ahmadabughannam6868]

What are the pros for a cable b series trans conversion just wanna know for future knowledge thank you love the content

[@MrDelsoleg11]

There is no pros the main reason you would use the kit is because hydraulic transmissions are much easier to come by.

[@frezara.k8706]

Ok...I might new in this AWD kind of thing..but I gotta ask...can I use an Evo AWD drivetrain to put on Civic?..or something else?

[@paistuproductions5519]

I don't think it works like that.

[@kikkerbare]

nice channel, im sure it will grow fast!

[@popiwatv]

do they degree the cams in that k motor? I would love for humble to do a video on how to. I tried various forums and videos and it's still pretty confusing. when and how its done. I'm gonna have to when I get my k24 head complete. y'all do good work. watch every vid

[@MrDelsoleg11]

It's really not a necessity to degree cams on a k series. The ones that do are for race use only

[@paistuproductions5519]

@@MrDelsoleg11 or if it's a big cam.....

[@MrDelsoleg11]

@@paistuproductions5519 yes and that falls under race use. Really no need to run a cam over 15mm of lift on a street engine. All is needed these days to make 300hp is 14mm of lift and 260@.50 duration anything over you're just putting unnecessary strain and wear on the valve train components and timing chain tensioner.

[@ryanwolfe911]

There's no bead on the end of the pipe, no wonder it blew off!

[@boogietv1379]

I live in okc i think i need to take my eg to yall so yall can swap the D series to a B how much y’all charge?

[@humbleperformance]

Call us 10am-6pm 918-461-8951

[@derrickjones4371]

Humble to the front

[@gustavoalfaro919]

Hello I have a question I have a stock b18b1 non vtec and I was wandering if I but a eBay turbo how much can I push the motor

[@h2bpilot358]

With a decent size turbo and tune you can make 300hp

[@youdontevenknowwhatyoudont7657]

Just a little fyi for anyone who reads this, turbo sizing is a critical area where several different size compressor wheels and a will work and same for the turbine wheel and housing. The smaller the a/r on the turbine the sooner the turbo can spool but at some point it can become a restriction if it's too small for a given airflow. Running too big a turbo for your intended horsepower and application ( street car, daily, drag, time attack or just fun on the twisties) will affect your power curve leaving no power till your redlining. It's really the cfm or pounds per min and pressure ratio that determines power capabilities and it's best to figure out your end goals and budget then rear up on other people's turbo choices and decide. Cause a turbo that spools super quick down low is fun but stresses the transmission and drivetrain way more and is tricky to drive fast out of corners so research and ask companies and people before you get anything, parts combos really make a difference plus buying a exhaust manifold for a t4 and you end up getting a t3 or mitsubishi size it'll suck.

[@aragrox]

How is it AWD without an AWD dyno?

[@ricardorodriguez-se7tp]

Need to tell the customer to put push connect on the boost selonoid and turbo i seen very expensive turbo damaged when one of those zip ties let go and the turbo suckes the hose and zip tie.

[@nolansweat3059]

ricardo rodriguez or just an air filter would help lol but i agree need to secure pressure lines

[@leonardosaenz9272]

Dice one too :D

[@victorpla16]

Yyyyyyy que paso con la Murano?

[@Jaooroth]

Looks like Block has already been resleeve

[@Scrildo1]

No bead roll on that pipe that blew off??

[@johnhinsely7894]

Awd b-series have a parts list for the awd kit? I have a eg couple I want to do

[@humbleperformance]

We sell all the parts for about $7500

[@johnhinsely7894]

@@humbleperformance transmission and everything including? Like what does the parts consist of. I love y'all builds man it's so sick 🔥💪

[@humbleperformance]

Everything minus the differential mount.

[@BvtecturboEKHATCH]

Humble performance i honestly just like spark plug wires and plugs that to me is just a add on problem and he has what on what I'm saying I've seen them take stock harness and wore a b16a with accell and k20 resistor plug wires it would run with out a certain resistor spark plug

[@belcebu5907]

Siempre me gusto Como trabaga El GORDITO se pule con Los motores ..this year I'll fix my Honda the one you see en esta foto ..no SE que carajos le boi aser pero lo boi a areglar 😂😂

[@efral.b5894]

El gordo es mi idolo lleveme a trabajar con usted bro saludos desde costa rica

[@HN-zf1yv]

Love from malaysia

[@Akeem_768]

What’s that handheld tool @0:30?

[@humbleperformance]

Akeem - The timing light ?

[@Akeem_768]

Humble Performance lol idk what that was until you replied & I googled. Thank you!

[@Jamxknife]

Is it css'd

[@humbleperformance]

No

[@Jdmnaz7]

Whats the setup on the gsr? I have the same exact setup looking for same numbers. Id like to know the setup and the fuel management as well brother. Btw keep up the sick edits on the vids. No car dudes making these vids touching but sadly have many followers smh

[@humbleperformance]

Eagle rods CP Pistons ID2000 Walbro 450 Springs/retainers Precision 6262 Stock sleeves

[@Wheemer]

@@humbleperformance What about block guard or CSS?

[@jeanmitchell1648]

5:03 dyno brake hit vtec yo

[@noteshpku4776]

AWD ?

[@michaelramirez8297]

Desde República Dominicana 🇩🇴 hermanos de Puerto Rico 🇵🇷 hagan video en español plis también así como hay una partes 😂👍💪🏼💪🏼🔥

[@ItsTheFry]

#HumbleJam

[@garywhite3209]

Big fan Fry, where's Bender? I see you everywhere, huntertuned, gba, hondavlog. Tip my hat to ur taste sir

[@ItsTheFry]

@@garywhite3209 has okay. Getting drunk off synthetic and chasing robot bitches .. the usual. If you got dope Honda content I'm there!

[@jonnofowler5752]

Why does the RunFile_13 show 545hp max at 4:44, but then at 5:09 the same RunFile_013 shows 520hp max? ....

[@humbleperformance]

Different power calculations checking speed vs engine rpm

[@boostdeep3967]

Chebere

[@BvtecturboEKHATCH]

But help me with the right plug were toget it

[@RapsheetRecordsLlc]

Rename channel to "BigBoy" -Everything big here- #BossLife

[@claytonthomas603]

John f. Kelly Chief

[@j.barrett9424]

That's a fucked up cable to hydro

[@johnhinsely7894]

First