1000RR Integrated Tail Light Install

[@oozyboozy1]

Thank you so much! I have a 2007 cbr 600rr and nobody's posts helped me. I have the exact tail light that I ordered on ebay as well with the same colors. You helped me out bigtime! It's Canada day here in Canada so I'm gonna have a drink for ya here! Cheers and thanks again!

[@jdmboys378]

I’m really glad this helped you! Cheers!!

[@poollova]

Awesome Write up man i will deff be using this video to install mine keep them coming

[@elmerrsv4]

Connected the wires of my '03 zx6r just like you said and everything worked just fine.. After a while though, the fuse burns.. Did a total re-wire but the problem seems to come back each time.. Advise is welcome

[@jdmboys378]

What did you find on this? Sorry I didn’t help!

[@MrMaddog38]

Great vid, thanks for the help!

[@CortezJacob]

i have an 09 cbr 600. i ordered my kit from cbrheaven(which i don't recommend anyone do!!). and it came with little to almost no instruction on how to do ANYTHING. I've been messing with the wiring for the past three days, and haven't been able to figure it out. The wires coming from my lights (on both the kit, and from the bike), look about the same. So I'm gonna give this method a shot tomorrow and see if it works. Thanks in advance!

[@jdmboys378]

Did it work out?

[@jdmboys378]

@DiESeL954RR Sorry im late responding. Each blinker has a green ground wire comming out as well. So you have 1 yellow going to blue and 1 yellow to orange. I wired both green wires together to the black ground wire on the brake light. Have had no problems with it. Hope this helps.

[@jdmboys378]

@Bnizzle21 Yes, unless you have a plug and play integrated tail light that has plugs. If your integrated tail light is like mine and has no plugs you have to cut the wires near the blinker. DO NOT CUT THE PLUG THAT IS ON THE BIKE OFF. Just in case you ever want to go back to stock. I left the plug connected and cut the wires closer to the blinker itself. Hope this helps

[@jdmboys378]

@Bnizzle21 yeah, that part isnt fun. you have to pull out on both sides to get it back over. carefully of course, as to not scratch anything. good luck mate.

[@jdmboys378]

@oozyboozy1 your definitely welcome.

[@JoseRodriguez-lt7xi]

Hiii . I did this and my brake light dont work only my signals work????

[@kosnow11]

my tail light came with two ceremic "resistors" i guess they're called.. where do those go in the loop? thankssss

[@dnyce2381]

whts going on do i have to hook da green wires together or can i just tape the ends

[@jdmboys378]

@kapie86 Sorry...I guess my comment didnt post from my BB. If you have any questions just msg me.