100HP Micro Jet Boat Speed Test + Jumping Wakes!

6' Micro jet boat gets fully sent! Special thanks to Ariat for sponsoring this video bit.ly/3CvRDGe
My dad's channel / @carlstime5956
Our Podcast @Sent and Bent
Fan contact info
PO Box 2370
Sandpoint, ID 83864
USA
grindhardyewww[AT]gmail.com
For business or merch inquiries please contact [e-mail]
Other inquiries grindhardplumbingco[AT]gmail.com

[@aserta]

The biggest problem with this is if it takes more water than it can displace, it will sink like a rock. Since this boat has a pretty big scoop, i suggest you make a rack with a fast inflating rescue buoy on the back (they're not that big) and the fill sensor can be in the engine bay at the top. If it sinks, this deploys and keeps it afloat. Two other mods, T end for the jet, and a set of stability wings.

[@GrindHardPlumbingCo]

That’s actually a great idea. Was planning on adding floatation foam, but that sounds easier!

[@miltonfridman1239]

This is such a great a community with good feedback and a creator who listens and pays attention

[@fadedlight8596]

@@GrindHardPlumbingCo put a ring of pool floats on it!

[@nathansimsalek4930]

@@GrindHardPlumbingCo Might even want to look at guys that race snowmobiles on lakes... they use a simple buoy and rope system to be able to recover the snowmobiles off the bottom of lake when they sink them.

[@requiredusername5731]

@@GrindHardPlumbingCo Did you say how fast it went in the video? I didn't catch it.

[@herozero1287]

Your dad having a blast was definitely the highlight of the video. Awesome video and amazing tiny boat. Thanks for another entertaining one! 🦅🇺🇲

[@GrindHardPlumbingCo]

Glad you enjoyed that part! And you’re very welcome!

[@epicstyx1378]

@@GrindHardPlumbingCo yea me to i subed to his channel

[@carlstime5956]

Go dad!

[@nr_beast2677]

He was forsure ripping that thing harder then the kids 😂

[@epicstyx1378]

@@nr_beast2677 none that sissy shit just get it gotta get it

[@Psychalflare]

Can we take a moment to just appreciate how beautiful that lake is in those drone shots

[@CRneu]

Welcome to the western united states, especially the PNW. Idaho is pretty but everywhere you go here is beautiful. Lake Pend Oreille is really beautiful .

[@allensandven0]

Not sure how far is Hadden lake from there ? I almost bought a place on that lake in 97 I’m pretty sure it’s not listed for $112 k 2 bedrooms dock and 150’ lake front, yea sometimes I think how could I not think that wouldn’t have been a great retirement plan . My word of advice as expensive as every thing is today it will never be anymore affordable as it is right now in a general sense .

[@althejazzman]

It's how I imagine Canada to look, yet it's still the USA just. I'm probably totally wrong though as I've never been there.

[@davidcatlin1970]

@@althejazzman the Rockies go all the way through Canada. So if you follow the Rockies, I think it's similar for many many miles north and south.

[@davidcatlin1970]

I grew up in the Finger Lakes region of upstate NY. Hard to beat for beauty year round! Then moved to the Sandpoint area. The only time the Finger Lakes region beats out the Sandpoint area is the peak of fall colors! I really miss the oaks and maples covering the hills! But the rest of the time, the Rockies are AMAZING! I love living in the Sandpoint area!

[@bashr52]

Carl has to be the coolest dad ever! Props to him for jumping right in and sending that thing! :)

[@jasonmarange5973]

Dude had a smile from ear to ear! Love it!

[@sherriemoon703]

I’ve always wondered if some larger company ever wanted to buy one of your prototypes and mass produce them. I’m definitely jealous of the pay time you get on camera

[@Spadookie]

People would buy them but they would be so commercialized they would be made cheap and underpowered. They would also probably cost the same as a Turbo RZR if not more.

[@BIGSMOKE-bl2lq]

Plus it couldn't be made from old parts from random vehicles would need to be off the shelf parts or easily manufactured parts

[@spoze171]

Would be possible but I don't think any company would take the time to reverse engineering one and the amount of custom parts would be insane

[@sherriemoon703]

@@spoze171 not expecting a 1 for 1 replica but reasonably close could sell

[@sherriemoon703]

@@Spadookie underpowered would be the issue.

[@gtboutdoors1588]

GHPC has been one of my favorite channels for years now. Not just because of the content, but also because of the guys behind the channel. They never take themselves or any of their mistakes too seriously. I also love how they take feedback from their audience and use the knowledge of others to make their builds even more epic! Keep it up guys!

[@brianblank9921]

Ariat! Awesome sponsor! Best boots I've ever owned. I go through a pair of boots every year and I've tried all the major brands. Ariat was the most comfortable and waterproof of any work boots I've owned.

[@Beara-bear]

My mother was a firm believer in Ariat boots ✌️

[@zacharywalker5344]

Your dad is savage. Hope my kids treat me this way when I'm old

[@chacehahn6556]

I think y’all should be wearing a helmet or put some padding on that windshield. If you hit a big wave and your head smacks that windshield it’s lights out. Be safe guys

[@raytothet7665]

This is so epic guys!! I have wanted to say for a while now that your channel is top notch! The energy and content is second to none. The videos are well edited and absolutely no filth so I'm totally confident in letting my kids watch them. Keep it up guys! I'm a grindhardplumbingco'er for life!

[@chillywilly883]

Love how your old man just got in and pinned it. Looks like great time at the lake, cheers.

[@dukie1616]

Been watching you gents for so long now and your builds, sends and antics are always the best! Keep killing it y’all are absolutely lit! And that mini jet boat is total fire!!

[@FunniestFlicks]

The video quality is just insane on this channel. Your team is one of the most dedicated on youtube for sure.

[@GrindHardPlumbingCo]

Haha! Thanks man!

[@Beara-bear]

Until that mean person comes and starts yelling at everyone for teaming 😖

[@amcustomfab]

That was a genuine smile on your dad's face. I see the next modification being the dash being notched out with built-in knee pads 😎

[@GrindHardPlumbingCo]

Haha! Not a bad idea. 🤣

[@mattchenery3352]

Looks great and like a blast! Maybe add some pink foam strips for on top of the windshield and the piece for the metal above your shins. Don't want anyone to lose some teeth or hit a nose.

[@Beara-bear]

😬 not knee pads 😅

[@ToddLarsen]

Any time Dad is involved you know it's gonna be fun, ALL THE FUNS!

[@davidblanck4131]

I love how much the team has grown, and you still haven't changed. You all are the best. This is the 3rd mini jet that all of my favorite channels have introduced. You are the only one who has actually done it. That is what separates you from the rest.

[@travid25]

its inspiring to see others live out your dreams love you guys!

[@GrindHardPlumbingCo]

Thanks man! We appreciate that!

[@Beara-bear]

Love you 😊

[@bensymington5550]

Have a good weekend boys

[@DeviantCanuck]

Ah what a wonderful way to start the weekend with a video featuring hands down the coolest build you guys have done to date. Always have a huge smile on my face watching you guys enjoy yourself, keep being awesome!

[@dadsshenanigans9632]

One of my favorite guys to watch do fab work, your thought process is next level!

[@BCATC.250r]

You are literally a genius I've been watching for a couple years now an can't believe some of the things you've made. I'm from BC Canada an really enjoy building old three wheelers an dirt bikes so this channel is a absolute beauty to me

[@GrindHardPlumbingCo]

Thanks man! I appreciate that!!

[@intricateinc8566]

BC Born and raised. Yeah glad I found this channel, great ingenuity and fabrication and grown men having some kid fun is always entertaining.

[@BCATC.250r]

@@intricateinc8566 Nice to hear from another Canadian ☺️ yes it sure is ! I find the older I get the more I want to play with smaller toys an thing s from my childhood haha so these guys really make that happen lol

[@intricateinc8566]

@@BCATC.250r Exactly, when we are young we are all in a hurry to grow up. And then we grow up and wish we were young again. Best we can do is infuse some childhood wonder into our responsible adult lives and have some laughs and smiles along the way.

[@BCATC.250r]

@@intricateinc8566 I could not have said it better myself my friend I wish everybody thought this way! There's nothing that makes me happier then playing around on these old bike with my 2 young boys. I hope they can slow down an take it all in like you just mentioned

[@bryduhbikeguy]

I'm wondering if a 3-4" 'hydrofoil'type fin on each side of the front hull would keep it from nose diving so deeply?Keep on doing what you do guys,it's always a wild ride for us too.

[@57F100]

They need to see this comment, I'm not a genius but it sounds like it would work to me

[@latenerd2441]

THIS!!!!!

[@davidluptak]

On the last video i also mentioned hydrofoils as aj upgrade for it. Its great idea

[@ernielin3614]

also wondering if the boat is too small / low for them to fit a scupper valve for one way draining

[@abrfox1234]

Trim tabs

[@markpeterson8978]

When I found Grind Hard Plumbing Co. it was the 100hp jet boat thumbnail that caught my eye. Luckily it was right at the beginning of the build. I started watching for the jet boat but I keep watching for all the Rad Shit you guys do and build. This episode was everything I had hoped it would be. The boat performed really well, in fact far better than I thought it would. Great job GHPC. You consistently exceed my expectations. Cheers!

[@intricateinc8566]

Yet another reason I am a happy subscriber. Love watching the wheels turning as you guys come up with stuff and then just bang it out. Keep the great content coming gentlemen @ Grind Hard Plumbing Co

[@MontanaYeti406]

That smile on Dad says it all!🤙🤘

[@GrindHardPlumbingCo]

Oh yeah!

[@AccAkut1987]

Can I just point out how awesome and on point the camera work and edit is on this? This is reaching Top Gear UK levels! I've no idea where that is, but I wanna go on holiday to that lake now 😍

[@CRneu]

They're at Lake Pend Oreille in Idaho. NE side near Hope. The islands in the lake gave it away for it.

[@crawlerking98]

still love seeing are local area actually having some great people that build great projects and show off this beautiful landscape

[@CarswithNash]

It was hard not to have a smile on my face the whole way through this, such a fun video!👍😎

[@niklaswo]

One of your more beautiful and heartfelt videos. Family and friends having fun together in an amazing landscape ♥️

[@CLCIII]

Big Props to the video and editing guys! Beautifully done video!

[@GrindHardPlumbingCo]

Thanks man!

[@Beara-bear]

Simply Marv. 😃

[@CLCIII]

@@GrindHardPlumbingCo My Pleasure! Credit to those who deserve it! As Always, May God Bless you and yours! 😇

[@EricFB]

So jealous of how clear the water is at that boat launch. Beautiful!

[@RamblinAround]

That thing turned out amazing...well done!

[@waylon7371]

U guys never disappoint ! Always building amazing stuff !!! 🤘🤘🤘

[@that1guy302]

You guys seem to always take things I tend to think about and make them a reality, keep up the good work👍

[@GrindHardPlumbingCo]

You think up some fun stuff

[@GrindHardPlumbingCo]

Thanks man!

[@95Civictuner]

Guys, such an amazing project. Props to you all in the growth of skills. Not only in fabrication but also in video production! Love watching your content! Thank you for making it enjoyable for all ages too! 😎

[@FilosophicalPharmer]

Been keeping up with build. Reminds me of so many summers growing up on the lake, pulled by an all-aluminum boat my grandfather bought in early 60’s because “we’ll never have to buy another one” (he was right. Boat belongs to cousin today). That boat is a work of art, guys. It has beautiful, classic lines and I am sooo happy for y’all. All that said, I’m mainly here to say - your Dad is SOOOO COOL! 👍🏼 Kudo’s, Carl!!

[@josecastaneda1386]

Legit love EVERYTHING about this channel😭😂🤘🏽 keep doing what y’all doing. We love it

[@GrindHardPlumbingCo]

Thank you! We appreciate the kind words!

[@CLCIII]

Ethan's attention to detail ALWAYS makes me smile! All it needs is an auto bilge pump now!

[@Davideo50]

I'd think a kayak-type waist cover thing might be in order.

[@GrindHardPlumbingCo]

Thanks man! We have one on the way!

[@stirfrybry1]

@@Davideo50 A pink skirt would add a nice touch

[@brianzaborowski2724]

Awesome job guys and I have to say I'm jealous of how much fun all of you have! Carl probably felt like he was 20 again and having a great time ... cool!

[@garrettbryson3040]

Bilge pump, foam on the windshield frame for facial contact, and a seat the gives a bit to save the back. So sick dude. Peanut butter and jealous.

[@KutsugeMindUrmoks]

That's so awesome! Your builds are constantly top notch

[@GrindHardPlumbingCo]

Thank you!

[@ericwells384]

So awesome! Only thing that worries me is the top of the windshield bar.. id hate to see someone whack there face into that.. maybe add some foam padding or something? Even some thin stuff.. Either way that thing is sick and looks like everything works great on it!

[@braedenmetcalfe5263]

man, watching them test this that has been my biggest concern. its like watching someone just run their finger nails over a chalkboard without touching it. I see a serious dentist trip in their future...

[@geecee4]

That micro has great attitude while jumping. Amazing build guys!! Looks like so much fun on an absolutely gorgeous backdrop! Kudos for the great parenting example! Awesome to see in todays world ❤️

[@firstnamelastname8971]

The scenery is amazing!

[@EdwinOlding]

This is so much more fun than a jet ski! But I am still very sore 2 days later haha

[@GrindHardPlumbingCo]

Haha! Same! 🤣

[@CLCIII]

Reminds me of the indoor go karts I rode almost all day on one of my son's birthdays. Certainly sore from head to toe for several days after especially the ribs from the wrap around seat! So Much Fun Though!

[@Davideo50]

Maybe wear knee pads and/or a seat suspension/dampening system like a race boat. Also consider a kayak spray skirt. I must confess that I live vicariously through you guys. You might appreciate my rocket stove see kzbin.info/www/bejne/maqWZpymmNCfatU. Has a US Utility Patent.

[@stwilfridsneedle795]

Your genuine excitement for what you do always comes shining through. You really are like a bunch of 12 year olds..and I mean that in the nicest possible way. A big hi and well done from the far away land of Tasmania..

[@firemanfireman7228]

You guys have done a great job getting that boat done Real test results great Loved it Fireman 🔥🔥 🔥

[@mikecrystalrobert7898]

So good your dads face was priceless just full send right away👌

[@josephdougherty2399]

your dad taking it out made me smile remembering my father ...he had 5 boys and girls...he was a processional driver as were all of us boys .. every time we modded a car he had to take it for a run ... he never abused them... but he took them to the max without damage ..... I'm the baby of the family...I was the last . RIP John James Dougherty.. WWII south Pacific veteran.. fearless to the end ..June 31, 1925- June 28 1995

[@GrindHardPlumbingCo]

RIP to your dad! Sounds like a genuine great guy! My father passed away when I was 14, so I understand. -Ethan

[@josephdougherty2399]

@@GrindHardPlumbingCo 💕

[@eyeballengineering7007]

The trim control came out great! You can even add more notches if you find it planes a little better with some trim.

[@fixitjames3388]

The micro boat has got to be one of the sickest builds yet! That thing is awesome 👌

[@scuzzjumper]

Truly one of the best builds ever and my favorite!!!. Thank you!

[@amorton94]

My goodness what a gorgeous lake! 😲

[@christianfrye5254]

Glad nobody took the steering wheel to the dome 💯💀 Hell yeah dudes!! Best content and creations on KZbin! Cool to see ole Carl sending it 🤣

[@ozzypawsborneprinceofbarkn3249]

Finally stretching the flippers on the mini jet boat! I love this project!

[@phillacy5545]

Guys you out did yourselves on this build. Love it!

[@stuartmatthews8276]

Hi Guys from Australia! found this channel after seeing you on stanceworks, been following you ever since! Love all the fabricating & cool home made "toys", & once again this video was epic, but the thing that really stood out to me were the wide shots toward the end of the video, they really added an emotional "feel" to the video. Props to your production crew, this was amazing!

[@GrindHardPlumbingCo]

Thanks man!

[@christianfrye5254]

I think you guys just created a new sport 🔥

[@adams4425]

I absolutely love what you guys come up with! So inspiring! I always thought my 'BIG' nine foot long Jet Mate with the same engine was fast but this thing would blast right past me. I would love to see you guys re-power a Kawasaki Jet Mate and build a tandem trailer to take them both out to the lake!

[@johnyvolvo434]

Absolutely stunning , y’all never cease to amaze me

[@CLCIII]

So glad you are doing an upgrade and another video! I really want one of the 12 foot ones with about 400hp!

[@GrindHardPlumbingCo]

We want one too!

[@sharonbraselton4302]

biy oicníc biat 2 440 ho fusél jdts

[@ReeshaRacing]

u guys consistently come out with some of the most exhilarating videos on youtube

[@GrindHardPlumbingCo]

Thanks man!!

[@rajgill7576]

The way it parts the water when you first punch it is awesome!!

[@vamperspective3332]

Great Video, awesome Build and nice scenery! Surfing after the jetboat brings up a idea: Jetsurfboard, maybe electric or a rly small powerfull motor. Riding the Boat and the surfboard together would be a great shot

[@johnrichardson4327]

Really enjoyed this one! You guys sure know how to have fun.

[@GrindHardPlumbingCo]

Thanks man!

[@LogicBeforeAuthorityOFFICIAL]

SAFETY TIP: Put a soft stirofoam type thing on the top of the windshield in case your head slams foward and down... It that happened, your head would be split open where ever you hit it... Forehead, nose or mouth... This is IMPORTANT. Daniel

[@cadensager1187]

I'd just like to say, how much I look up to you guys, working in a shop making whatever crazy idea comes to mind is my dream. I'm currently in HS and taking as many engineering classes as humanly possible. I just recently learned how to plasma cut and next is waterjet. Thanks for doing what you guys do, its beyond just making cool $#1+ it's inspiring!

[@cadensager1187]

Hey guys, if anyone sees this, spread the word, these fake content creators act like they are the person your watching but it's indeed a scam, although you might get excited, don't rush into doing exactly what they say, instead wait and think about the logic behind it. If you need even ask another person for recommendations. -Caden

[@allautomotive626]

Love the ingenuity and reuse of materials 👌🏽

[@tychoklapwijk8306]

next step: a tiny trailer for behind one of the powerwheels and an epic adventure?

[@somerandomsmile7298]

this was sick guys love these mini versions of vehicles there so rad.

[@GrindHardPlumbingCo]

Thanks man!!

[@somerandomsmile7298]

@@GrindHardPlumbingCo np fellas

[@N1RKW]

Dang. That was epic. No other word will suffice here, in my opinion. Kudos for the build, for all the fun you guys had, and especially to Carl for being such a cool dad!

[@Randomperson0467]

Scam don’t reply

[@trojan6530]

That build is truely amazing, awesome work my friend. Cant wait for your next creation. Thanks...👍😁

[@javman03]

You guys need to make "knee notches" in the dash, and pad them well for maximum send-age.

[@jshug1103]

Was thinking the same thing.

[@aaronmcconnell7358]

I'd still like to see you guys build a mini offroad wrecker to take down to Matt's off road tow truck Olympics I thing it would be hilarious 😂.

[@haphazard1342]

"World's biggest off-road wrecker rescues world's smallest camper"

[@myrtletheturtle2155]

love to see the hydrofoil out on the boat 🤙 great videos

[@MoparMattt]

Amazing video as usual guys! Also making a KZbin channel for your dad too so freaking awesome and wholesome!!

[@jenshohne3599]

I love you guys, thanks for so nice content!!!😍

[@GrindHardPlumbingCo]

Thanks man! You’re very welcome!

[@rc_allthetime4770]

You guys have to race it with a real big speed boat and compare them,,, would be awesome,,, because this thing rips brutal... 👍Unbelievable work

[@stevegredell1123]

It might win to 20-30mph, but the big boat would be able to stay in the water where this thing bounces around. It's all about agility over speed.

[@DiscoFang]

Watch some short course stadium jetsprint boat action to readjust your perception of how fast a jet boat can accelerate. Search YT for "jetsprint ENZED"

[@stevegredell1123]

@@DiscoFang those are literally 2x the length and purpose built for speed. This is built to hit rocks and trees in a shallow river. It can't compete on open water. Also watch this video where it is bouncing out of the water and having trouble maintaining 30mph

[@DiscoFang]

@@stevegredell1123 Refer to the original comment about racing against one. It’d be no contest.

[@maoribaca2655]

i feel like this is proof that ethan i a certified madman, and should never be stopped mad respect i love seeing you guys take a break form the grind to full send it

[@3dwezzy740]

that looks so fun yall took lil benchy to a whole nother level🤣

[@ryanryan3473]

I love how you modified the file!

[@GrindHardPlumbingCo]

Hahaha! Oops. 🤣

[@apra_dk]

same ;-)

[@ld3941]

Dang call me Captain obvious but that looks like so much fun! Nice job guys

[@Ekim87]

what a great video! Shots were amazing, seeing your dad rip that thing awesome. See you guys have genuine fun. Awesome!

[@treya2403]

That was emotional lol My mother passed so all I have is my father so that was so awesome to see the dad out there having funn together and epic video the boat done great and a beautiful lake ! Much love brothers ❤️🤙🤝

[@leee2235]

Love it guys!! do yourselves a favour and put some foam on the window area in case u fly forward and take ur teeth out or wear a helmet! keep the videos coming!!

[@JohnS858]

Dang! How much for one of these? Seriously Interested. BTW every build I've seen from you guys is straight up 🔥. Keep up the good work and great content!!

[@GrindHardPlumbingCo]

We’re definitely not building them to sell, but hit up Jetstream Adventure Boats for a hill kit!

[@YOUNGSTERS-JETS]

Smashing build lads :) a longer ride plate could help with the bouncing, I wish I could get my dad in my boat all the best from the UK, Rock on !!

[@eddyre1333]

love ur video's get me through hard times love it keep it up

[@Wooskii1]

That was one of your coolest videos yet! Great production/ editing, and a crazy little boat getting absolutely aired out👍

[@justinbarron8980]

Congratulations boys.! Keep up the content 🎉🤙🏼

[@gradybrowning3976]

That thing is so wild, love it!

[@mtnbound2764]

dude the trim lever is pure genius, elegance in work. simple, functional, and it looks cool!

[@davidstoner2864]

That thing is awesome!!! You guys build some very impressive stuff. Great fabricating skills!

[@miguelangelb4310]

congratulations for the video, and the projects you do, you are monsters, greetings from Cádiz, Spain

[@BeamerTheFox]

what a great episode, love that lil ripper boat lol

[@rawritjon]

The Powerwheels of jet boats! I love it!

[@marielarebelo9194]

Carl's face is just the best thing ever

[@cjm5002]

A lot of people overlook buying sign blanks. I use them a lot in my fab projects because its 6160 x 1/8" at whatever dimension. Super hard, easy to work with, and can hold a tap for smaller bolts.

[@paulharrison6834]

"buying"

[@corey6393]

Seeing your dad rip on that thing was pretty cool. I have not seen him in many years. Looking good. Nice footage of our beautiful lake. It has been perfect weather to be in and on the water.

[@mandman3505]

볼때마다 감탄이 절로 나오네요.저도 배만들기 도전해보고 싶네요. 잘보고 갑니다.