10R140 Disassembly

2021 Ford F-250
PATREON: / curmudgeontransmission
Supplier Links:
Superior: superiortransm...
Transtar: www.transtar1....
WIT: www.wittrans.com/
Sonnax: www.sonnax.com/
Teckpak/Fitzall: www.teckpak-fi...
Transgo: transgo.com/
Precision of New Hampton: gopnh.com/
Atec Transtool: www.toolsource...
ATSG: atsg.com/
ATRA: www.atra.com/
Fatsco: www.fatsco.net...
Jaggi"s: www.jaggiimpor...
Slauson's: www.slauson-tr...
Standard Transmission & Gear: standardtransm...
Wade's: www.wadetransm...
Bishop's: www.bishopengi...

[@automaticosdovale-cambioautoma]

Maravilha, ajuda muito esses vídeos! Parabéns.

[@CurmudgeonTransmission]

Thanks for watching.

[@lynntatro7374]

Thank you for showing us this transmission. There must be a better way to removing that part without breaking your hand tool.

[@CurmudgeonTransmission]

It requires modifying a puller to get up under it. There is quite a bit of force required to get it off. Thanks for watching.

[@محمديوسفالقوصي]

💯 %🎉🎉🎉

[@CurmudgeonTransmission]

Thanks

[@TrannymanSingh]

Kool

[@CurmudgeonTransmission]

Thanks

[@andreasparpas4875]

Hey, sorry unrelated to this video, but was watching you rebuild the 6F35 and I’m trying to replace my valve body and now I only have neutral and park. Wont engage in drive or reverse. I’m thinking I misaligned the manual valve, but how do I know if it’s lined up correctly? Thanks!

[@CurmudgeonTransmission]

You will have to have the pan off to tell. The peg of the Internal Mode Switch will need to be between the 2 end lands of the manual valve..

[@jeremyking5684]

Hey tom, just got that 4t65e back together, reverse is working but soon as you drive it starts shifting hard.hooked scanner to it showing transmission fuild pressure sensor low voltage. You think sensor went out or is something else bad?

[@CurmudgeonTransmission]

Could be it went bad, or it is just not plugged in good. I assume you cleared the codes, and it is coming back.

[@jeremyking5684]

​@@CurmudgeonTransmissionyes,have cleared codes keeps coming back starts shifting hard. Are they any valves that could be stuck causing this? When I built it 3 years ago I put all new ac delco sensors and solenoids in it.

[@CurmudgeonTransmission]

What is the exact code you are getting?

[@jeremyking5684]

​@@CurmudgeonTransmissionpo842 and hard shifts

[@CurmudgeonTransmission]

Voltage low means the switch is showing that the TCC is engaged all the time. Usually, it is a bad pressure switch manifold. It will be that or a pinched wire.