11-16 Ford F-250 F-350 Superduty Windshield Wiper Linkage Replacement

This Video Explains how to replace your 2011-2016 Ford F-250 F-350 windshield wiper linkage and or windshield wiper motor
Tools needed for job:
Pry Tool
8mm Socket
10mm Socket
13mm Socket
13mm Wrench
Ratchet Wrench for Sockets
Optional 3/8 Impact
I hope you find this video helpful!

[@robertroth1042]

Thank you buddy. I got a 2020 F250 just got torn up at the car wash bent the driver’s side !

[@ianedwards5025]

I’m glad this helped!!

[@billhyden8574]

Appreciate the video

[@ianedwards5025]

Glad I could help!

[@Itz_Me_Hes]

whats lift tire setup truck looks clean

[@ianedwards5025]

This was a front end level, 24x14 Specialty Forged wheels, 33 inch tires. Thank you!

[@justsayin...2784]

I've got the same exact situation on a 2011 F-350... Question: Videos for prior years show a retainer clip for the joint that failed. This does not appear to be set up like that... To fix this one joint (i.e., attachment to the passenger side) is it necessary to get an entire new armature set? Or is there any way to just repair the one connection?

[@ianedwards5025]

There certainly could be a retaining clip. If a new retaining clip is what is needed to fix the joint, that would work. If the joint is to worn and loose, I would recommend replacing the entire assembly. If you are only replacing a small part, be sure to inspect other parts on the assembly as it might just end up being worth while replacing the entire assembly

[@justsayin...2784]

Checking the other end, it appears to be a rubber bushing that has worn out.

[@ianedwards5025]

Most Definitely would recommend replacing the entire linkage@@justsayin...2784

[@justsayin...2784]

Thanks... Yes, nevermind my question. Upon closer inspection, what I called a "bushing" was really just sort of a dust boot... And the ball joint in question clearly had more wear than the others. So... just getting the complete assembly as was done in the video. Again, thanks.