117whp&242Nm | Proton Iriz 1.6L Ft.IrizFujiwara86 | Malaysia

▶ 请加入称为我们的KZbin会员~
/ @aderenlim
▶ 如有商业合作或赞助，请联系~
‣‣ E-mail ► [e-mail]
‣‣ Facebook ► / aderenlimpov
‣‣ Instagram ► / aderenlim
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Performance :
117hp & 242Nm
Irizfujiwara86 Mechanical Mod-Spec:
• Remapped Proton ECU by Khairul Tuner Garage
• Super Circuit 4-2-1 Header
• Max Racing Performance Middle Bullet
• Max Racing S-flow Muffler
• Max Racing Forged Carbon Exhaust Tip
• Full exhaust piping change by Yi Ekzos
• Works Engineering Universal 24K Grounding Earth Cable
• Works Engineering Simota Performance Intake
• Works Engineering Lighten Crank Pulley
• Works Engineering Lighten Cam Gear
• Works Engineering Aluminium Pedal
• Works Engineering Engine Oil Cap
• Works Engineering Radiator Cap
• Brisk X-line Performance Silver Spark Plug
• Sanwa Front Slotted Brake Rotor Slotted
• FECC Steel braided hose
• Hot Inazma Voltage Stabilizer
• UltraRacing Front Strut Bar
• UltraRacing Rear Strut Bar
• UltraRacing Rear Torsion Bar
• GAB Super R Heavy Sport Heavy Duty Absorber
• Muteki Front Lower Arm
• Muteki Front Absorber Link
• Eibach Sport Spring
• Raxer RP10X Rim (15” 7.5JJ)
• Michelin Pilot Sport 3 Tyres (195/50/R15)
• ALWAYS RON97 USER
Irizfujiwara86 Cosmetic Mod-list:
• Iriz Rear Spoiler (Add-on)
• Iriz R3 Edition Front Lips
• Iriz 1ST Gen Premium Side Skirt
• Iriz Rear Diffuser by Venom Motorsport
• RD Malaysia DRL and Rear-tail lights Stage 3 Conversion Kit
• Recaro CS Sportster Nismo (Replica- Thailand)
• Custom Carbon Steering
• Custom Red Leather Door Trim
• DIY Ambient Lighting
• Sustec Front Bonnet Damper Hood Lift
• Iriz ACTIVE center Console
(R&D done awaiting parts from Proton)

[@aderenlim]

经过这个影片后，车主去DynoJet做了一次测试，大家可以看看我的 shorts

[@aderenlim]

Performance : 117hp & 242Nm Irizfujiwara86 Mechanical Mod-Spec: • Remapped Proton ECU by Khairul Tuner Garage • Super Circuit 4-2-1 Header • Max Racing Performance Middle Bullet • Max Racing S-flow Muffler • Max Racing Forged Carbon Exhaust Tip • Full exhaust piping change by Yi Ekzos • Works Engineering Universal 24K Grounding Earth Cable • Works Engineering Simota Performance Intake • Works Engineering Lighten Crank Pulley • Works Engineering Lighten Cam Gear • Works Engineering Aluminium Pedal • Works Engineering Engine Oil Cap • Works Engineering Radiator Cap • Brisk X-line Performance Silver Spark Plug • Sanwa Front Slotted Brake Rotor Slotted • FECC Steel braided hose • Hot Inazma Voltage Stabilizer • UltraRacing Front Strut Bar • UltraRacing Rear Strut Bar • UltraRacing Rear Torsion Bar • GAB Super R Heavy Sport Heavy Duty Absorber • Muteki Front Lower Arm • Muteki Front Absorber Link • Eibach Sport Spring • Raxer RP10X Rim (15” 7.5JJ) • Michelin Pilot Sport 3 Tyres (195/50/R15) • ALWAYS RON97 USER Irizfujiwara86 Cosmetic Mod-list: • Iriz Rear Spoiler (Add-on) • Iriz R3 Edition Front Lips • Iriz 1ST Gen Premium Side Skirt • Iriz Rear Diffuser by Venom Motorsport • RD Malaysia DRL and Rear-tail lights Stage 3 Conversion Kit • Recaro CS Sportster Nismo (Replica- Thailand) • Custom Carbon Steering • Custom Red Leather Door Trim • DIY Ambient Lighting • Sustec Front Bonnet Damper Hood Lift • Iriz ACTIVE center Console (R&D done awaiting parts from Proton)

[@babisotonggg]

ehh, synergy double layer radiator not yet added during filming?

[@fourtry]

😬👌👍💪👏

[@xbonesuper3029]

Muteki lower arm is a hazard haiya, don't bother put on car la, my Myvi use for 7 months already kaput, daily drive to work(klia) only

[@Lelouch-fv9yx]

242nm overclaim. dyno scam. CVT2 cant take up that much torque. even cvt3 used by preve will blown up if take that much tork

[@babisotonggg]

@@Lelouch-fv9yx the guy who do the dyno doesn't scam. he done tons tons of remap, teaches tons of tuner and got tons of branches now

[@MuhdIqbal]

That torque figure on NA 1.6 campro with that mods seems impossible. I think the figure is around 140 or 150Nm on wheel at best considering power lost at CVT.

[@markod1908]

scam fake torque, overclaimed. Aderen should know when driving the car because torque make your car lighter. It will break the record for proton can reached 242nm.

[@AaronLim872]

242nm...0-100 需要超过10秒，这辆车厉害炮咯😆 直接吹到422nm 更好咯😆

[@kenkiz100]

同意，stock car 0-100在11秒++而已，这个torque吹到有点厉害

[@nutz748]

应该是因为 cvt 上 dyno 的关系... dyno torque reading 会稍微不准

[@shahfendiroslee]

My car totally standard but always tekan by me everytime i driving can hit 10.21sec to reach 0-100kmh. How come modify car only can take 11++ sec. Totally waste

[@shengszangan6786]

Proton preve 1.6 Turbo大概 1300kg-1400kg, 忘记了多少HP, turbo kick in 过后 max torque 205nm.. 0-100 都要差不多10秒。这个iriz 如果真的是245nm，应该只要7秒 - 8秒 就100kmh了。 所以我判断245nm是骗人的。 再说，proton 用的punch CVT... maximum tolerable torque 只有215nm.. 如果车主真的有能力tune到245nm... 我相信他的牙箱耐不了几天就炸。

[@吳偉銘9155]

又是我期待的一集

[@AidenATOP]

哥，不要玩，punch cvt 242nm, 估计马力机有问题了吧，cvt 在dyno graph 是100% 线性上升的，然后torque 肯定在before 你的最高马力就出现了，毕竟你都没弄internal, 不是吐槽，只是希望不要有misleading 的info 😅

[@BreadPrince-fj6zf]

117hp我还相信，242NM我还是不相信。 我自己原装iriz 0-100也是11秒出一点点，他改了也还是11秒出一点点而已完全没差 要么去试多几间dyno就知道真的数据了。 而且cvt vt3承受220NM而已，而最新的vt5 才承受250NM。IRIZ用的是VT2+，估算能承受最多应该也才180-200NM之间。 反正看了过后过来是假数据希望车主自己醒目一下吧😂

[@aderenlim]

今天车主就会去 Sunway 做一次 Dyno lo 🙏

[@BreadPrince-fj6zf]

@@aderenlim 哈哈哈 看看成绩会是多少了🤣

[@utopianage]

nice one bro.. padu ...

[@LIONDANCEONLYINMALAYSIA]

wow nice iriz

[@Talentzero91]

Unless this car convert to diesel, 240+Nm is possible. But small na engine with remap and spme stuff, 240 sounds too good to be true

[@Nabilllllll]

Impossible, no way on earth can this car gain almost 100Nm without turbo.

[@muhdakmal9872]

Yesza

[@fourtry]

Nm I don't know but Yes way....why not....look at R3 team at Sepang can put up to 200 hp on campro engine...... Hmmm

[@l.k.y.6929]

@@fourtry 200hp on 1.6na is possible, just look at those vtec engine, but the torque..

[@abcdefg7425]

@@fourtry vtec torque also around 200 only. This 1 242nm with stock internals is nearly impossible

[@Nabilllllll]

@@fourtry The cvt has a limit, even the beefed up CVT in the turbocharged preve and suprima were limited at 220Nm only, i highly doubt the iriz’s cvt can withstand higher power. 117hp with 240nm gap is impossible with an Na car, that’s a turbocharged figures. torque for 117hp should be around 150-170Nm only

[@lokeguanyu2358]

242nm …最后几个弯好像拉牛一样 不太可能吧242

[@yoyomanhey265]

看了这个video又弄到我想买iriz了🤣🤣

[@oumstudent]

mantap la bos

[@3dmundPang]

这样厉害的！X70 on wheel应该都没有242NM这样高哦！👍🏻

[@aderenlim]

Proton power 😋

[@3dmundPang]

@@aderenlim FD2R靠边站啦😝

[@SiroccoSeven]

On wheel 260nm 有。在dyno 原厂数据。

[@3dmundPang]

@@SiroccoSeven 那么1.5的就没有了😆

[@SiroccoSeven]

@@3dmundPang 1.5t 三杆有250nm左右。原厂 on wheel dyno la.

[@xiruihong9982]

242nm 梦里吗？😂

[@chanduit6649]

😅

[@winsonyew84]

快乐马力机！

[@davidwang1502]

awesome , spend RM30k, 0-100 = 11 seconds .....

[@babisotonggg]

wanted to see how fast it goes from 0-100 from 242Nm(skeptical about this value since it's NA and CVT )

[@happy_forever8]

0-100 looks like not much different from ori I rather spend the $$$ on a non CVT car

[@Akendesuu]

I'd guess its from the inevitable rubber banding effect of the cvt

[@gochiksam6358]

❤

[@fauxvier8519]

What a beaut!

[@bolasepakita]

Huihh.. takut i tgk u drive 😅

[@Haikalhakim89]

Tulah pasal haha aku takut jugak tengok dia Drive haha 😂 kat genting kot 😂 giler lah,aku kalau Drive tak macam tu sangat haha sebab sayang nyawa bro😂

[@shinntan6866]

我首先向车主说声对不起，恕我直言。 根据你给出的dyno graph写着有24x nm torque，但是经过我耐心的看完整个影片感觉上这个数据很不实际。 尤其是如果你一直有看speedometer的话更加觉得不切实际。 照理说240nm torque上山时速不会提升到那么慢，尤其博主是一直控制在4k rpm左右的最佳范围。（这并不是我个人观点而已，很多有去跑track的motorsport同行玩家也这么认为） 希望车主可以去别一家tuner那里来个dyno power run来确定数据是否有错误。 我个人观看了整个video感觉车很under（根据视频），车主可以考虑增加前面wheelbase宽度或者减少后面的wheelbase宽度。 再次我说声对不起，如果想把我贬为酸民我不介意。 而且我可以建议车主/博主去个sepang trackday来看是否真的有所提升。 这升级基本上是在sepang可以拿到大约在3分钟或以下的lap time，在云顶这样 “试车” 其实很危险，也带来很不好的印象。 谢谢

[@aderenlim]

我已经带了车主去DynoJet做测试了， 我也有拍了个 shorts （你可以点击我的频道看），其实才不到150Nm，所以是马力机的问题🤓

[@shinntan6866]

@@aderenlim 直接把link写这里呢。找不到视频

[@reico8814]

手牙lagi best😂

[@mrno9263]

可能cvt dyno的时候他们调机器那边做了手脚

[@Jc-bb2rj]

老实讲 很慢 车这么轻马力这么高nm也这么高 0~100还要十多秒 踩油meter不会去这样 哈哈哈

[@patrickgan1870]

这辆我驾出去highway一定给Golf tiong🤣

[@abcdefg7425]

NA 242nm好像不太可能吧

[@wjy1064]

Owner already clarify on his IG that the actual torque is lower..lol

[@ChyanSie]

Why the owner removed his IG. 🥹

[@slyzn]

Nice car but i’m sorry that definitely not 240nm car. My stock Iriz 1.6 CVT 2014 does 0-100 km/h in 11.1s 😅 The up hill drive also doesn’t even look close to that figure.

[@aderenlim]

You can see my latest short video, I bought owner to dyno jet and got the real figure ~

[@alvinhou6699]

242 真敢吹 一个tuner真敢骗 一个owner真敢信

[@chenghengmun4963]

不是要酸，说实话 myvi 1.5 lagi best 没那么高马力 扭力，0-100还快过他 还有。。。242nm emmmmm😅

[@zulhaikal5624]

Hello sir, what type brand of this radiator?

[@mr123undead]

242nm? Ada turbo lar... My 2500cc NA also around this torque and run 0-100kmh in 8.5s, 1.5ton car automatic

[@exyang9]

说实话，原装myvi 都快过他.. 我明白自己的爱车上节目会吹水一下自己的车多厉害， 可是这个吹到有点过了🤭

[@SevenKJ777]

來了

[@sumantriisa2485]

nice.. ada power.. Average fuel 7.6l.. mkin jimat pulak makin di lenjan

[@lancekhor2378]

只要你不尴尬 尴尬的就是别人

[@3dmundPang]

可以哦！😂😂

[@aderenlim]

[@tanyh6225]

Where you buy the transparent timing cover?

[@thommyzawa5186]

the iriz manual 1.3 that u drive is stronger than this i think

[@hanyaoyap1826]

評論區很精彩😂

[@JDManiacSport]

My car Astina the 167hp only torque out 210nm. How he can get 242nm torque? My car is 80% almost same like AE86.

[@foodstation110]

This guy should upgrade cvt to 1.6 manual...

[@weayew009]

you sure!!!! original 150nm to 242nm???? impossible man

[@babisotonggg]

I also kinda skeptical about it. Let us wait and see how fast i goes from 0 - 100..

[@weayew009]

@@babisotonggg 11.26sc 0/100kmh........hahahahahahahXD 242nm.......

[@babisotonggg]

@@weayew009 might be due to punch cvt, but who knows. my iriz 1.3mt(1.6) with 180Nm now can get around 10sec 0/100kmh.

[@weayew009]

@@babisotonggg that's why impossible 240nm

[@kenneth5487]

Assuming is possible, but after 3.7rpm torque curves drop like this how to drive also a problem meh.

[@guesswong]

还是追不到坐奔士的夏树😢

[@zaiigai4382]

我gm6 120hp 140nm罢了0-100 9秒saja这个是不是dyno有问题😅

[@shengyung91]

242Nm 为什么你没有拆穿他 😂

[@chanduit6649]

🤫

[@nabillarif]

It will be tragic if this car has not been autofoamed

[@georgelian4068]

😂😂 242 nm torque 0-100 so long ?

[@SyedAutoHouz]

is it 142 nm ? no NA*no turbo* have this figure..max for NA 1.6 litre is around 160nm..🤔

[@Ayxl_Toh]

next use Honda prelude pls

[@thailee5511]

大改装

[@roze9084]

Cvt适合4-2-1？

[@arifhaikal5804]

seriously? my ex car neo cps highcam, high comp piston,full system exhaust,open pod n others,only got 120whp and 140nm torque

[@arifhaikal5804]

and 17inch 8jj rim

[@fujiwarahazim86]

Nandayoo 😂

[@YueLiangTan]

No way in hell this thing is putting out anywhere near 242Nm

[@凯旋-y5e]

242NM 是上了快乐跑步机吗？ 那么慢

[@carsontan2081]

爱的人，你给车主骗了吧，我的inspira 240扭力，0-100 6.5秒..如果他的是手牙maximum 都是150nm，不可能还快过swift sport zc32 和zc33

[@chenghengmun4963]

觉得最多人吐槽 是这一集🤣吹太大了

[@carsontan2081]

@@chenghengmun4963 我觉得爱的人根据顾客的需求说出来，拆穿车主等下变了两个难看

[@vincentzaizai7890]

这个dyno graft看起来是on body 马力，所谓的bhp的

[@seng328]

唉可惜。。。名誉很重要哦。

[@G.MAXToysCollection]

这车跑得过4age 吗

[@yapcheemeng7515]

改了无边框后视镜？

[@puglover8918]

Iriz 永远都输给myvi ！handling好没用 跑直线就被myvi抛在后面摔10条街！ 还有就是 花一辆saga的价钱改iriz。说实话tai ling ngong ！怎样改都好还是iriz 还是一样慢 有钱倒不如换更好的车

[@l.k.y.6929]

可是handling也是好过myvi十条街，没有最好只有最适合自己

[@GIGAMATHIX]

然后myvi 就被翻在路边，傻逼

[@yowvoonpiou340]

242扭力是多少转出来？6千转啊？😂😏

[@azrock8743]

242nm 0-100 11sec?? sussy

[@viperthe13th]

Is a joke that none of 86 but sticker and name it 86 ~ 24x nm torque 0-100 11 sec still slower than a cvt vios with only 14x torque ~ both jokes 🤣🤣🤣🤣

[@dtckchannel8475]

Na, but more tokkong than max racing exhaust 🙄🤣

[@shabiripin5700]

117hp n 142nm

[@jasonlimkh9332]

Bro, I like your each review about each car u been driving.. but sadly u always speak Mandarin.. me 🍌, so some conversation I doesn't understand... If one day, possible can you do review with Cantonese language 😂... Paisei² 🙏🙏🙏

[@aderenlim]

Thanks for support boss, you can open the cc subtitle ya 😊

[@jasonlimkh9332]

@@aderenlim Done already bro, but still hopping can hear your Cantonese version 🤣😜

[@chunmunchong8358]

果然是100%正中proton cvt 声音大可是速度没有 好yeah

[@ronintai2041]

1600 NA -> 242Nm 2.4na的扭力咯，涡轮增压吧？而且配上cvt。。。改去手排吧哈哈

[@minchianchye412]

车主IG关掉了吗？IG找没有😢

[@easonkok99]

教一下center console怎么改的

[@aderenlim]

给钱人家改

[@pehpenghuat6203]

如果改正jazz 就美了

[@a_jiachenyap1295]

我今日才知道，Proton 也有86

[@thailee5511]

如果改YARIS就帅

[@yishenghiew6470]

happy jet？😮

[@Jordan-zh7ev]

追persona是哪一集？

[@divineproduction17]

kzbin.info/www/bejne/qpO5kqKHgJKlhdU 这个

[@chongboryang1185]

扭力有点惊讶242nm😅比civic fe还要高

[@irfanqayyum2983]

iriz 1.6 manual please boss

[@tr6864]

Bukan senang jumpa iriz manual ni, lagi2 yg high spec 1.6

[@truckman7123]

觉得这辆要改第一先改成手牙的!

[@zectsen]

隨便擠出多近10nm??!! 不是很靠譜，若是說馬力的話還比較可能，最後還是那個cvt真的沒戲，要是換了5mt應該很暴力。那個中央扶手想改，可是這個幾千塊錢。。。直接勸退

[@kimnotking9742]

NA 247Nm? Turbo?

[@minglol88]

改到酱，因该输myvi

[@kenken35446921]

车主也太天真了吧。那么容易被骗。车主知道240NM 是什么概念吗。哈哈 Anderen 你应该delete 这个video。 笑死人了。

[@erickhoo4627]

在找我？

[@kenttheydongweimoe]

这俩车好像跑车

[@xiang1352]

242nm???🤣🤣 preve 应该可以400nm 🙃

[@Qifeng洪琪峰Hong]

punch cvt 242nm。。。。。

[@l.k.y.6929]

1.6na 242nm!! s2000都没那么高

[@leebeckham4461]

Though can play drift😅

[@fasinchin9162]

0-100 也太慢了吗

[@asgcsp]

Scam torque 😂 to gain more viewer..😅

[@adriel8662]

242nm🤦‍♂️

[@darknez09240]

slow af

[@redrosefor7]

speak english bro.. tak faham chinese

[@aderenlim]

Open CC subtitle tq