12' Challenger "Quarter Panel Replace"

[@Justacogg]

I pray that you ripped all that foam out of the bottom of the rocker panel that rust out so many challengers on the road! If you could spray some rust proofing in there before the new quarter panel one on the owner I’m sure would be very appreciative!

[@teflon_da1]

I need to have this same job done but on the passenger side

[@msmith803]

Where are you located at need mines done, passager rear quarter panel insurance claim

[@hermyherm365]

That looks good man , my wife had a car fixed once from a car accident she had at a paint shop who's name I'd rather not say ... and it had overspray on the windows .. like they didn't tape nothing up , trunk lines up all fucked up not to mention everytime it rains the trunk gets full of water man ! Called them up told them about it dudes where like when it left it was good ... whatever man !

[@BuildsByB]

Hermen Lomas damn that's F up

[@Marz-px6vx]

How much would this cost parts, labor

[@mylynne1953]

People amaze me. All these comments about how great a job he did. Good job EXCEPT all the trash in the paint, door gaps are off, he never shows if the seam was welded or just filler. Not impressed.

[@BuildsByB]

sachmo omhcas You’re right I didn’t show if the seam was welded or just filler just like I didn’t show the cut n buff process but this is NOT a How To video!!

[@KaleoKognito]

How much to do this job cost ?

[@SSS-cp1op]

Great job dodge was pretty ignorant for doing the quarters like that

[@giovannigarcia9168]

Straight hacked it homie Jose worked at to many carnitas auto body shops. Still came out good tho

[@rockeybuyer3895]

Hey man where are you located I got an 18 challenger I need some bodywork repair

[@travisbucknor6453]

What’s does the pricing look like for this job?

[@idk6934]

Can you send me your info I need to send my challenger in brother

[@mikeprice8307]

Can y'all fix mediocre bondo work that was done to this same panel on a challenger from when it was repainted years ago? Or would you have to replace the panel?

[@lieutenantorion6475]

Is the quarter side window trim replaceable?

[@phantom5185]

Great job, been wondering can't find anything online. Question: Please [I'm stuck trying to disconnect the back plastic bumper from that right-side quarter panel, passenger aswell.] But, I watched your video whoever took the quarter panel right-side off did disconnect back plastic bumper. From after removing the lights both, well inside the trunk, can't seem to figure out (using what tool flat head screw driver?? ) I don't want to break tabs off, got me? Thanks for your time ahead. There are lots of removing front bumper on U Tube, seems your the only one from what I can find. Sam...

[@phantom5185]

Just what I was looking for, [but my interest is (How to Separate the back quarter panels from the plastic bumper?). After removing the lights and un-connecting all in the inner wheelie well area. [I do see use had cut over the door on the quarter panel, I guess it was so there was no need to remove the front window? Right? I'm stuck on removing the plastic bumper skin, where they're connected to the quarter panels. I don't have a book, and can't find a video online. Great video buddy. Sam...

[@mikelane8095]

How much something like this will cost? I have the same problem.

[@phantom5185]

Me to > I go a quote for both, cause I have blistering on the drivers side. I made a video of my car, you can watch it here. kzbin.info/www/bejne/r3LGppdmhtJ4Y80 and kzbin.info/www/bejne/iWO6nXiBYph0hZI I watched this guy, I'll be doing the same thing > kzbin.info/www/bejne/j5bQXq2BrJqhqtk&index=11&list=PLL7M7nYibwk9Uu5S1FB4SIrvF7j49wlEw The cost is $6,800.00 Canadian Chrysler would flip max $3,000.00. They told me I'd have to pay $3,800.00 plus if anything else inner would be extra. (Fuck that.) The quarter panels are coming off, I'm going in the morning to pickup my materials carbon fiber. I'll be making a mold solo. I'm thinking on if I'm removing go all in and go towards forming a mold of "Wide Body".

[@PHARRAWAY]

nice job good work

[@Skbowling2003]

You do some good work. Keep the videos coming

[@BuildsByB]

Skbowling2003 thanks bro

[@Mr.Frost181]

good job man I follow all your work an love what you doing bro ....🏁🏁🏁🏁🏁🚩💯💯

[@shmiggz]

How did you do the seam on the roof? Did you drill out the spot welds from the inside in order to slide the quarter out of the two outer layers of sheet metal?

[@phantom5185]

I noticed, they only cut across above the door. I guess so they didn't need to remove front window. [ This is my current issue feel free it's here ] I go a quote for both, cause I have blistering on the driver's side. I made a video of my car, you can watch it here. kzbin.info/www/bejne/r3LGppdmhtJ4Y80 and kzbin.info/www/bejne/iWO6nXiBYph0hZI I watched this guy, I'll be doing the same thing > kzbin.info/www/bejne/j5bQXq2BrJqhqtk&index=11&list=PLL7M7nYibwk9Uu5S1FB4SIrvF7j49wlEw The cost is $6,800.00 Canadian Chrysler would flip max $3,000.00. They told me I'd have to pay $3,800.00 plus if anything else inner would be extra. (Fuck that.) The quarter panels are coming off, I'm going in the morning to pick up my materials carbon fiber. I'll be making a mold solo. I'm thinking on if I'm removing go all in and go towards forming a mold of "Wide Body".

[@datvu2446]

I want to know thid as well..

[@subsolar74]

Doing one now and alldata says butt joints with backing and panel bond, no welds at sectioning points. I’m assuming because of all of the foam.

[@hawaiiboy8082]

How much did this cost?

[@felipexavier-xavi5239]

How much for this service? Have a 2016 and the dealer charged me over 5k to fix the same thing

[@ron.247]

Dealerships always up the price. Especially on labor and they only use new replacement parts.

[@johntavarez6556]

how much was it to replace this? I have the same work that needs to be done except the side mirror or door?

[@TheLegendaryLoso]

Nice job! you ordered the quarter panel from mopar??

[@BuildsByB]

Legendary Loso yes

[@TheLegendaryLoso]

How long should a process like this take? I have a repair where they are going to do this I got quoted 10 days?

[@BuildsByB]

10 to 15 days is the going time frame for a quarter job

[@eyadomar5878]

How much to get out done??

[@eyadomar5878]

Hope much did it cost you to get it done?

[@unorthodoxgarage4222]

hey when is the vid coming for ur 2500 hd

[@keegottifoster2331]

Teach me a thing or two willing to learn

[@dimefever1006]

Nice work!

[@oscarreyesfigueroa2832]

Dam didn’t cover the interior

[@twosmackken8928]

Came out good

[@joehowell979]

that looks awesome

[@MrThe302crew]

Good shit boi

[@MrThe302crew]

Do vids more often

[@lawrencepatterson]

🔥🔥🔥

[@Wrenchlife604]

propper work. OEM planel not a cut and welded skin. Good job

[@nonameisthename138]

This guy is NOTHIN NICE!!!

[@BuildsByB]

Tony Redden what that mean?

[@nonameisthename138]

Lol! You're the BOMB, B!!! You're GREAT!!

[@BuildsByB]

Tony Redden oh lol preshate it

[@toplocalsearch]

Soo much overspray on right side

[@NateDougie602]

what the hell happened, lol we need the back story fam

[@BuildsByB]

NateDougie602 I honestly don't know I think someone hit him and he brought the car to me to fix

[@nearheaven5311]

Nice work!!!

[@damianfranklin7321]

💯😘