Metal Morphing! | Stretching Out Dents!

I'm going to show you how to use a strong metal morphing technique to reach the trifecta on this no-paint dent repair. An I-Bar tab to stretch out the dent, as well as a hook to bend and a hammer to straighten.
Training Email Me
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun...

[@K3Flyguy]

My father was a fender body man for 50 years. I wish he were alive to see this kind of work! I seen him work magic on the older heavy metal panels of the older cars and trucks. Fix holes, stretch and shrink metal, anvils, pick hammers, flat head hammers he had em all. All his tools are safely stored but I have no idea what to do with them almost nobody does hammer nobody work with the new thin high strength memory steel used these days. To be honest it's almost unbelievable to see you do this kind of work! Extremely well done video and great content!

[@dealerhealer3673]

Your dad was the man!

[@wilsoncougar4267]

it's not worth the work.Old-fashioned.............

[@joshdaniel7894]

@@wilsoncougar4267oh it’s so worth the work. You won’t find it in a collision shop but I work in restoration and you damn bet we hammer them as flat as we can

[@JackBlack444]

Fake?

[@user-xo4wi2yz9v]

I love this video

[@Rick_B52]

If I didn't see it I would never believe that was salvageable. Incredible work!

[@josericardo476]

Es muy cierto por eso digo que me quedé como rgum preguntándome cómo lo haces buen trabajo maestro

[@darrellguess19]

Want to go to work on my car some idiot hit me hit and run driver they want $2,000 to fix it

[@larrydavis9539]

I have been doing auto body/collision repair for forty years and never would have believe this had I not watched it with my own two eyes,that was amazing to say the least,I subscribed

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment larry

[@jairosanta1761]

This the first time I’ve seen a full video like this and super impressed. Really helped out a lot.

[@andyecs]

It's refreshing to watch a quality bodyman make a repair--AND--without needing paint !! YOU, sir , know your craft !

[@Onemanstrash1]

as a red seal body tech I am offended by your suggestion that we don't do quality work....

[@JohnnyBailey-jq1qm]

He’s not a body man, he’s a PDR technician . This repair still needed paintwork and probably a skim coat, but he clearly stated the customer wanted a 90% repair and didn’t want to pay for a flawless repair. Paying attention helps

[@ronmccall2877]

I do have to say myself the man if steel is more of a wizard of metal. I'm 56 years old and been doing body and paint work since I was 13 years old, specializing in restorations and customs. I used to think I was above average at working metal until I watched him in action and by far I believe he's the best I've seen.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@VanishingNomad]

I have to agree. He is VERY good!

[@jf5154]

Even after all these years it's still satisfying watching them pop out lol

[@johnlundy536]

Sir you are a metal genius we need more professionals like you

[@hugolafhugolaf]

Seriously man, at this point, it’s beyond skills or art, it’s either magic or alchemy.

[@DentDiscountPDRBodyShop]

Laugh out loud funny thank you for your comment

[@gedsterged4763]

Cool

[@sinyotti5099]

I swear 👌

[@chriscs9080]

It's called "memory "

[@danielhigh7431]

3@@gedsterged4763 5.5.

[@unownvoyage]

The man of steeeeeeelll. You’re a legend! Incredible content and the passion you put into your videos is incomparable! I’m subscribing in hopes to be a fraction as good as you are in dent repair.

[@barkchip1872]

WoW! I didn't think that was possible to come out so clean. There were so many potentially nasty areas - tight creases being the worst. Well done - magic AND alchemy! Greetings from an autumnal Britain.🙂

[@DentDiscountPDRBodyShop]

Thank you for your comment I really appreciate it

[@jayo552]

IMAGINE RAW MATERIALS SHAPED 2 FORM THE VEHICLE...

[@cnnlt200]

​@Jay O they are stamped. Not very spectacular. This repair however is very spectacular!

[@dirtyminerapparel]

I finally did PDR for the first time. I can’t believe how much it works. I use to work at a Corvette body shop for years. We always replaced stuff or broke out the hammer and dollies to straighten metal then the stud gun and on to bondo and europrime and guide coat and into the booth it went. My kids car was blasted by a lady that ran a stop sign making a left into his drivers side front tire. I spent the weekend replacing suspension parts and using epoxy to fix the headlight. I decided to give PDR a try after seeing your videos and buying the tools from Amazon. I have to say I was shocked at what I was able to do with no paint work. You can’t even tell it was hit. I spent about 30 minutes with my buffer and some pads with superduty and finishing compound. It’s like it was never touched. I just wanted to say thanks for the videos. I learned enough watching you to do this on my own and the results were amazing. My kid still thinks I replaced the fender and bumper. That says something about the information I picked up from your videos.

[@shuarose89]

New to the channel and about a year and a half into body work. You sir are already making my life easier. Killer skills.

[@DentDiscountPDRBodyShop]

Josh Welcome to my channel thank you for subscribing

[@farkookneebah]

I was having a crap day until I got notification of the MAN OF STEEL had posted :) You made my day cheers Superman

[@DentDiscountPDRBodyShop]

Kevin right on you made my evening with your great comment.. thank you

[@crauchle]

You earned a new subscriber. Amazing repair work. Watched you fix a quarter panel on one right before this I basically laughed when you said it could be done. Being in the collision repair trade for most of my working life I didn’t think it possible without paint cracks or super stretched metal. It was immaculate when you got finished up, figure this fender you could do with eyes closed. Thank you for sharing your talents with us!

[@DentDiscountPDRBodyShop]

Thanks for the sub!

[@nigelnightmare4160]

It's amazing how easy, a competent/skilled worker makes this look. Very nicely done

[@kevinmcleod3741]

Dude that was awesome thanks! This cuts down on repair costs ! Your on a gold mine with that ! Totally amazed 😲👏

[@devashishmohan5323]

Seriously this was a piece of work that was not near but beyond perfection without any teardown. I wish I could learn this art technique from you.

[@samsen3965]

Good to know still some people are this talented, patient, and not just a replacer of any damn thing!

[@dionlambard7368]

New subscriber. It's awsome how much pride you take in your work that you've turned dent pulling into an craft instead of taking short cuts or RnR the area and charging an arm and a leg.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Thank you for subscribing

[@aileentorres179]

New subscriber and I have to thank you immensely for your videos because they have taught me so much! I'm used to working under the hood, so body work has been a who new ball game for me, but your videos have been great and saved me a ton of money

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Aileen thank you for subscribing

[@marcianzero_yt]

Wow, I never new that the dent repair has arrived on this level. Thanks for sharing your ways. Not that I will ever do this kind of thing, but I subscribe anyways. :)

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Welcome to my channel thank you for subscribing

[@jamesduncan578]

This type of repair is old school. The problem today is the younger body techs want the easy way out, replace and paint.

[@sk22ng]

You're an artist, bro. If this is 90% you have a lot of pride in your work.

[@noahdunaway]

This is an amazing talent that few people have, much respect.

[@matthewmcbride1379]

Great video. I'm normally an engine guy, but this video was really interesting. Wish you would have shown your hammer in focus. I would like to have seen the end of it a little better.

[@PaintSociety]

Based off how long that tape has dried on the bumper, he hasn’t seen his friends and family in a long time anyways hahah. Great job as always!!

[@DentDiscountPDRBodyShop]

Paint society thank you for your comment I really appreciate it.. I believe if I’m not mistaken you have a newborn.. congratulations!! thank you for taking the time to post

[@PaintSociety]

@@DentDiscountPDRBodyShop love your energy in the video. Man of steel. Yahhh!!! Thanks for the support.

[@salimkazi3241]

@@DentDiscountPDRBodyShop Is m CCD 8 is the best thing

[@MartinMora92]

Bryan watches you too Lol

[@pakilodi]

Brian I was thinking the same exact thing but you know man of steel has to Hype up the Video.

[@voDKaandEric]

30 years + body shop owner. I am impressed! Liked and Subscribed!

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribing

[@gerardbelotti1730]

Just found this channel. Love it. Subscribed instantly because, yes, not every panel needs to be just discarded and replaced. Awesome channel

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@Johnlt13]

New sub here. I’m not sure how I found this channel but your work is next level. I’ve done a little dent removal in my time but nothing like this. You are the Man of Steel. Just wondering how much the typical dent removal cost?

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment $900-$1200

[@jimw6991]

​@@DentDiscountPDRBodyShop I am a new subscriber. Would this work on a car that had been repainted? Assume it had filler, epoxy primer then base and clear. I am guessing filler would have cracks preventing a perfect repair? Also, I believe you said customer wanted 90 percent repair ... how much extra to finish it to flawless like it never happened? If you were near me, I would be sending you my business. Really enjoy watching you work.

[@g.t.autorepairframe8956]

😁I love that :"it's too easy to replace the Fender"💪

[@DentDiscountPDRBodyShop]

Right on GT auto repair and frame thank you so much for your comment..

[@robertreavley7145]

Yet another epic dent pull! Your approach to dents like this is very well thought out and you make it look effortless bud!! Awesome to watch!!!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@Persian_Beast]

I do like your channel and your attitude! I never realized how hard is to do body work and how artist you should be to be able to pull that off! RESPECT FOR YOU! Subscribed!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@brandongreen9339]

Glad I found your channel. I appreciate the metal work. Anyone can slap mud on a dent but this is amazing.

[@user-xq3yg8mr6s]

Insane SKILLS!!!!! You are as much a wizard as a tech. I have done body work 35 years and I can't pick and file bare steel as good as you repair a painted surface.

[@michaelpoggi8064]

Amazing how far the industry has advanced from drilling holes, screw-in slide hammers, and Bondo. You've obviously done collision work along with pdr. Combination of great stuff

[@noahpierce8155]

New subscriber, as a cold rolling mill operator ive got a great respect for how you morph and manipulate this magic material!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Noah thank you for subscribing

[@Masso1973]

Dent magic, thanks for showing us your skills, I’ll be sure to remember these techniques.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@Buttered.0]

I was looking on KZbin how to remove my dent myself. A friend of mine had backed into my side door panel. I happen to stumble upon your channel. You're a magician! It's an artform I can get behind! I love stuff like this. 👍 New subscriber.

[@DentDiscountPDRBodyShop]

Julie Thank you for sharing on my channel.

[@Mike-xt2ot]

Had to subscribe! Ive watched alot of PDR techniques but none with the degree of talent you have. Thank you for sharing your knowledge in a time when most keep their secrets to themselbes. You are a talented and kind person. Thanks

[@MrAlittle5150]

Your not only a paintless dent repair guy, but your also a poet with explaining how it's done.

[@DentDiscountPDRBodyShop]

Thank you my friend

[@purplelovrgrl]

You’re**

[@thefloorkiller]

Absolutely amazing, this is the bodyshop of the future, had a PDR man I use save the roof of my classic car after a car bonnet fell on it which was tied to the garage roof, he did an awesome job, I buffed up the roof and it's perfect, but this is another level

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@davidbarnsley8486]

That is an amazing result man of steel I might have to watch some more of your stuff Your pretty clever 👍👍

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@saxyrep1]

Masterful ! Also, I can't be the only one watching the end like ASMR. So satisfying to watch all those dents being straightened.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@kharbouchesaid2578]

what a job !!! respect for curves, angles ... and without damaging the paint !! great job and congratulations to the "artist"

[@DentDiscountPDRBodyShop]

Thank you

[@matthewblack8552]

If I had a fraction of this knowledge in how to heat, shape, and manipulate metal, I would never have to worry about where I park to avoid door dings. This level is only achieved after years of hard work. New sub here.

[@SciHeartJourney]

You're a genuine Metal Morphing Power Ranger; AWESOME! I am truly in awe of your work.

[@DentDiscountPDRBodyShop]

Wow, thank you!

[@luisalcoser690]

That’s awesome , I would like to see more of this type of video.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@AyeJay-fe8pq]

new sub here. loving the content man of steel. I'm just getting into body work myself and you sharing your knowledge with us is appreciated. thank you

[@johnhenry4493]

Hey man this is John I came into your shop today with my jeep. Thank you for your advice. I’m now a new subscriber! Can’t wait to see more videos!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I just showed Leslie your message she told me to tell you hi. Thank you for subscribing I appreciate your comment

[@cnnlt200]

Just came across your channel. I'm a car mechanic. Just know enough of bodywork to know how difficult it is, and that I'm not good at it. We take our cars to bodyshops. None of them came out as clean as your results. Very very good!

[@toddltomlinson]

New subscriber -- I've watched several of your videos and you are a master magician with PDR tools!

[@lapd1989]

I have to say your the best there is bro. I have seen many people do this. But you got this down bro. Hands down man.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@joebeezy9471]

New subscriber! Just purchased a car for a deep discount because there was some ‘serious’ damage to the body. The right rear quarter panel has a huge dent. The right front fender and hood are pretty mangled. The right lower door frame is slightly accordioned. Gonna spend the winter slowly working on all those dents. I can’t wait to see the reaction from the previous owner next summer. He honestly thought it was too much work and too expensive to even bother. You’re videos will help get me there! Thank you for what you do and providing us with a view of it and explaining it all! Thankfully the frame was not harmed.

[@maarofmahbob3840]

Wow mannn.. you are truly the Man of Steel.... with a pair of magic hands... serious.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@glennmagera3498]

I have been a professional locksmith for over 25 years and like you, having the passion and dedication and the ability that set's us apart from the others in our respective trades although very different is the ability to think outside the box and approach and accomplish jobs that others have either given up on or just afraid of taking on in the first place! I'm 7 years away from retirement and have practiced pdr on all of my families vehicles for the last 5 years and love it enough to hopefully get into pdr full-time when I retire if my body permits me to, ( I've had several back surgeries and joint replacements that your videos have been so inspirational to me to not give up) you are the perfect example of true persistence and incredible ability! Please keep making the best videos on KZbin, thanks! P.S. I would love to visit you with my son one day for him to see a true pro in person! Keep up the great work.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. I’m glad I can be an inspiration to you and your family. I am in San Jose California

[@thecommonneighbor7553]

Wow man, new subscriber here. I work in dent repair as you do but nothing pdr related and I’d love to begin! Watching your videos is quite inspiring and I can’t wait to start getting some reps in on this whole new game. Keep it up friend.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@shakey2634]

Used to be a guy in my neighborhood that fixed all the motorcycle fuel tanks in the area. Worked out of his garage and would let us kids come in and watch anytime he had his garage door open. It was mesmerizing. People would come to pick up their tanks and they were as amazed as us kids.

[@SciHeartJourney]

I have a 2002 Pontiac Grand Prix. Aside from some light damage on my hood and front fender, my car's body is cherry. However, that damage to the hood and fender HAD me discouraged to get it fix, but after seeing this video I can see how they can fix it pretty easily now. I'm too broke to buy a new car and this one still works great. I'm so happy that I watched this video.

[@SciHeartJourney]

His non-flawless repair work is so excellent that I think I would NOT do the flawless repair at all! I am truly amazed.

[@gourav7387]

It's unbelievable 😲 Great work your a artist of metal I will try this on my car thanks

[@pazzy4501]

you are brilliant man 👍🏻, I shall call you "the man of the dents art work", keep up the good work

[@DentDiscountPDRBodyShop]

Thank you

[@robertstrangiii8062]

This is really something sir, my daughter's first car she paid for on her own got backed in to. Now she's on honor student at a high level college getting her masters, holding a job making her way. Unfortunately, just a week prior to her being hit I canceled the collision insurance, so dad is really trying to come to the rescue. I am a.single dad of 7 kids git one through college and 2 in college so ends are becoming tough to meet. She's driving a 2012 passat and really loves it, so looking at some of your videos I am using some of your techniques. This works amazing!! I am half way through and want to invest wisely in some tools. Any insights or direction you can offer would be more than appreciated. Thank you so much for the help you have given already. It's very much appreciated.

[@alcanhustla]

Love your work! I could watch your vids all day!

[@DentDiscountPDRBodyShop]

Thank you Philly for your comment

[@bigfoothunter3977]

Thanks for time. I helped my 16 YO cousin buy his first car (parents are going down the wrong road in life but he is a great kid - made 30 on his ACT). 2013 Infinity G37 and it has some damage we are going to try to work on. We are going to do a carbon wrap on the roof and hopefully I can do a dentless paint repair on 2 areas. After purchasing the car he was following me home and started flashing his lights... I was like dang it this is bad.... after pulling over he said man my seat is getting really hot,, could be an exhaust issue... I had opened the passenger door and told him the seat warmer was all the way up :). Thanks for your content.

[@muttznuttz6235]

That was impressive af. Anyone can paint a replace a NEW fender. This right here ... that’s TALENT !!

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@lessanders8996]

Fantastic work! OMG! first time on your channel, and I am so impressed with your skills! absolutely brilliant! I am retired now, but used to be a panel beater and sprayer,,,, never with so much perfection in taking out the dents as yourself! It was a matter of reducing the amount of filler to use by taking out as much of the dented panel as I could, using dollies and hammers etc to finish .! thanks for a very informative and interesting, entertaining channel! All the best, Les

[@DentDiscountPDRBodyShop]

Les thank you for your comment and appreciate it

[@markoslejsek5974]

Wow that was truly awesome. You are a true craftsman. What a skill you have developed.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment.

[@MyLife-lg6tg]

Amazing I recently got a small dent in a parking lot. It was from an older man, and I just couldn't make a fuss. I'm going to try this, it looks like such fun! Thanks so much for the encouraging video, again just amazing! Dan S.

[@WV591]

I remember as a young man working at a dealership back in the 70s, the car metal was so thick we always drilled and used that dent puller and then hammer and grind and bondo. so much metal to work with . now the car's metal are so thin the techniques have changed as a necessity.wish i could find a shop like this in houston.

[@DentDiscountPDRBodyShop]

Right on

[@issaalansari1721]

I'm a new subscriber, I'm in to fixing cars and i really like what you do man, you really deserve the name. Keep going cuz i am learning from you. Have a great day.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Welcome to my channel thank you for subscribing

[@stephenmeilak7113]

This mans a bloody miracle magician..This was incredible watching.Thankyou.

[@Raj-nh3fc]

You sir are the champ with great skill and the oratory power to go with it. Salute.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment Raj

[@bigsteve777able]

no words really we should all stand back at times and be amazed by what can be done, with some know how and how to use it, which this man does.

[@DentDiscountPDRBodyShop]

Trevor thank you for your comment I appreciate it

[@1995dresser]

Anybody can hammer out and fill with body filler grind sand and paint .But these PDR guys blow my mind working with a finished or painted surface and removing every dent and crease and not disturbing the paint

[@jeremynelson8496]

I just tried something like this on my work truck fender. Ended up caving and paving. I don't know how you guys do that. Nice work.

[@worldsails2000]

I think the 817 down votes are from are from body shop guys who lose out on jobs because of people with your skill set. This was an amazing job! Well Done.

[@sigma_z]

A true professional! Amazing work my man!

[@DentDiscountPDRBodyShop]

Thank you

[@sureshlingabathina]

This is the best PDR video ever seen on earth. Excellent subscribed.

[@DentDiscountPDRBodyShop]

Wow, thanks!

[@ELECTRICMOTOCROSSMACHINE]

AMAZING WORK, MAN OF STEEL DELIVERS WITH CONFIDENCE!

[@ropadoped]

You never cease to amaze me!

[@vernongollobit4781]

You’re one hell of a an artist that’s an excellent job!!!

[@James-bv4nu]

You're a sculptor, artist, and a magician.

[@DentDiscountPDRBodyShop]

Thank you

[@AnotherTecGuy]

❤ You’re an extremely skilled artist! First time watching your video. Very cool!

[@justinhudson2214]

I’m a new subscriber and I must say I’m really impressed with your work.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Thank you for subscribing

[@theSilvioRoesler]

Such great tutorial and display of your craft. It encourages me to buy more tools and try it out on my cars' dents

[@DentDiscountPDRBodyShop]

Go for it!

[@manuelvpr]

Dude, you are awesome, a true artist of your craft. Respect, man. Your work is amazing.

[@exnjute]

It would be cheaper to replace the fender unless he charges $10.00/hr for his labor.

[@DentDiscountPDRBodyShop]

Thank you

[@Flumazenil]

You are a true craftsman. Great work!

[@DentDiscountPDRBodyShop]

Thank you very much!

[@robale8228]

New to your channel, I really preciate all the techniques and information you provided in the video. In the process of fixing body and frame damage on my 03 blazer so thanks again for sharing your knowledge

[@DentDiscountPDRBodyShop]

Welcome to my channel thank you for subscribing

[@davidbrotherson933]

I'm a new subscriber- love your show. You're the main man! 👌

[@DentDiscountPDRBodyShop]

David thank you so much for your comment

[@frankiehumphreyiv5972]

New Subscriber, man you do Phenomenal Work !! I am truly impressed with the step by step commentary. -Sarge

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment. Thank you for subscribing

[@jasonshimrah6923]

Watching you working on tends is so satisfying!

[@DentDiscountPDRBodyShop]

Jason thank you for sharing

[@austinmetcalf7505]

New subscriber bro! This could be a tv show man, appreciate you sharing the knowledge.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com I appreciate your comment thank you for subscribing

[@ussdiscovery6912]

New subscriber! I worked in auto repair and refinishing industry and I've seen some amazing PER Done but you Sir have the skills to pay the Bills! I'm impressed!!! Well Done Mate!

[@ussdiscovery6912]

I meant to say I've worked in the industry for 30 years.

[@ussdiscovery6912]

PDR! Not PER STUPID Auto-Incorrect! 😂

[@jarredjackson6883]

New subscriber all the way from South Africa . Have never seen a panel beater as good as you before. Mucking afazing

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Jarred I appreciate your comment.

[@deanwaring6100]

Wow, awesome work. Thanks for sharing your skills 👍🏻 ❤

[@iamthemiracle81]

This dude knows his craft. Cheers!

[@jeffro4kag206]

I love the commentary! Ive been a body man for 40 years. This is awesome stuff. Ive tried this but always end up slappin mud on it. Hahaha

[@JohnWizz]

Great job, this is definitely and art! Have been doing this kind of work for a long, long time (not as a job only a hobby) and have never been able to get it that good. I don't think I have the patience. LOL

[@baz1054]

Baz from Uk subscribed. I’m not a mechanic but love you videos. You read the metal so well.

[@DentDiscountPDRBodyShop]

Manofsteelpdr.com Thank you for subscribing I appreciate your comment

[@CastleAdam]

You’re an absolute sensation MOS - and very poetic 👍

[@DentDiscountPDRBodyShop]

Adam thank you I appreciate that