12 Valve Cummins Is Worse Than I Thought...

Рет қаралды 5,510

Күн бұрын

Пікірлер: 51

@James-of-all 2 ай бұрын

Hey, im from new mexico and I lasted 2.5 minutes one time! Also snitches have unfortunate things happen to them because of their negativity. Karma is a bitch.

@JackStolz 2 ай бұрын

Man I love being able to just watch you figure shit out. I end up learning a bunch every viddy.

@steinfabgarage 2 ай бұрын

I love motivating people just to do stuff! If someone made it, you can take it apart!

@jeffhutchins7048 2 ай бұрын

If you get a 24V block, and it's a "53" block (look for a cast in number on the driver's side) check the passenger's side for CRACKS under the core plugs. Not all of them crack, mine has 435,000 miles on it, but a lot of them do crack there.

@phillyfathead 2 ай бұрын

We are along for the ride!

@jeffhutchins7048 2 ай бұрын

DO THE KILLER DOWEL PIN FIX whether you swap the motor or fix this one.

@oriancunningham 2 ай бұрын

yes

@EdwardVelez 2 ай бұрын

This makes me feel slightly better about my 6.0 F550

@PatrickBaptist 2 ай бұрын

Atleast no one is saying you cant kill a 6.0h LOL, those dodge boys say you can't kill a cummins, I reckon they say that since it outlasts the shipping container/truck body/frame.

@jamesbasye2362 2 ай бұрын

@@PatrickBaptistive never liked cummins, but one thing ive learned is you cant kill a 7.3 powerstroke, i mean you can but it would take a whole lot of stupidity and neglect

@steinfabgarage 2 ай бұрын

sounds like I need a seven.tree ...

@bombshellgaming6820 2 ай бұрын

snitches get their gas siphoned, and i just felt it when you started smacking the truck with the impact. sometimes anger gets the best of us all

@robbalinski1606 13 күн бұрын

One thing with a diesel is never ever get them hot! it does far more damage on a diesel then it does on a gas engine. You really don't even want your cummins to run at the middle of the temp gauge, it should sit just before half even hogging on it while towing. Seeing how your coolant looked and all the rust built up on the engine fittings, coolant is probably your heat problem. The haze at cold start is a common thing with bad injectors (very cheap fix on the 12valve and early 24valves). My 24 valves injectors only cost me 650 Canadian to get them rebuilt, so more then likely cheaper for you. 24 valve generally get far better fuel economy then the p pump 12 valves. Hope this info is useful to you.

@michaelosmon 29 күн бұрын

Seems like you're a much better mechanic than I am but everyone tells me it's a bad idea to break loose stuck fasteners with the ratcheting end of a wrench Appreciate ya bud

@RicoCantrell 2 ай бұрын

Just starting. Still jealous of the roll back.

@steinfabgarage 2 ай бұрын

It was nice when it worked haha

@RicoCantrell 2 ай бұрын

Just finished the video. Oh man. A whole motor. That's cars. @@steinfabgarage

@WendzDarKnight08 2 ай бұрын

New subscriber here! I do believe snitches get dissolvable dermal fasteners caused by blunt force trauma.

@jamesbasye2362 2 ай бұрын

I could tell before you even tore it appart that engine was toast.

@PatrickBaptist 2 ай бұрын

Ah no way man, you can't kill a cummins, they never ever die no matter what, you don't need a headgasket, just feed it some ether. Just playin sir, first time viewer, enjoyed it. You do calls for allied dispatch solutions or agero? Another channel (project farm) did a comparison and proved that stuff like PB blaster or WD40 those sprays don't really penetrate the threads they are a waste. Oh man please don't reuse head bolts, specially not in a diesel, when the break off it will be a nightmare getting that hardened bolt back out. Funny I bought those same shop lights for my garage and also my covered porch, they are really bright, a year later they ALL still work just like new, none are burned out and dont flicker, they were so cheap Im shocked.

@steinfabgarage 2 ай бұрын

Nahh I don't do calls. My only complaint on the lights is ive has a few switches burn out, BUT it does say not to link more than 3, and I linked them all haha

@jordanbarakat7288 2 ай бұрын

Even tho engine is in bad shape I’m sure ur having a fuel issue. They normally run perfectly until they blow into pieces 24v has different pistons. Main problem was probably fuel filter or strainer or lift pump need to check fuel pressure And shut off solenoid

@Garage_Beers 2 ай бұрын

Damn, well sucks but hey you almost just slid a head gasket in there and never checked the cylinders… good thing you did right? And lmao the rain said “oh facts you’re pulling a head? Hell ya 1 sec i gotchu”

@steinfabgarage 2 ай бұрын

I didn’t want to look, ignorance is bliss. Now I have to fix it correctly lol

@Garage_Beers 2 ай бұрын

Could dig into that cylinder and see whats causing it? Maybe something smaller like injector seals or something. Could pull the piston and dingleball hone the cylinder and call it day. Vs buying totally new motor. Idk. Would hate to have to see u buy a new motor when it could be something smaller. Given the cylinder is salvageable

@vroomvroom505 2 ай бұрын

I’ll ask about your light this week!

@steinfabgarage 2 ай бұрын

Thanks man, I mentioned it in the video since you never text me back 💔

@schte1n 2 ай бұрын

Killer content, keep it up 👌

@TrashPanda-kr2me Ай бұрын

When will you wire up the lights

@stevenoe6395 2 ай бұрын

You should really use a scope so you dont wast time lol you may be better off rebuilding that engine getting it bored might get away with honing that cylinder i dowt it but a rebuild mught be the cheapest way those 12v are pricey!!!! Good luck!!!!!

@slacky4358 2 ай бұрын

That was a good video really enjoyed it

@steinfabgarage 2 ай бұрын

Thank you!!

@Vile-Flesh 2 ай бұрын

Awesome video, really enjoyed it. It sucks when some fucking bottom feeding scumbag calls code enforcement on you for no fucking reason. That happened to me one time, the other times it was code enforcement doing a bullshit sweep looking for things to cite for. LOL at the cowl panel mod, I completely lose my shit and do stuff like that too sometimes.

@steinfabgarage 2 ай бұрын

TBH I think the second gen dodge is a POS, so Im not worries about breaking it, I bought it for the engine and rollback :)

@4x4rcoff-roadtractors54 2 ай бұрын

Now why did you go on break the plastic on the firewall I can literally take those windshield wipers off in 2 seconds just lift it up pull the tabs the blades come right off no need to take anger out on the poor truck

@steinfabgarage 2 ай бұрын

It made sense to me at the time