#123

Music by Tokyo Music Walker - Sunday Coffee
INSTA - / kamijuins
E-mail - [e-mail]
JUMA SKATE COMPANY - jumaskate.com/
Here is a description of what's unique about the trucks:
They are meant for any setup, but the Type 200s were specifically made for ESK8, where higher-speed cruising and stability are a benefit. They have a 20 degree inclined double kingpin setup, however, unlike a traditional truck with double kingpins, these are designed to allow the steering knuckles to rotate independently. This aids with self-centering and gives you control over the toe, which can be used to make the setup very directional for high-speed cruising, or aid with turn-in to make it surfier. The steering weight is adjustable with a single screw on the back of the trucks, along with swappable "plugs", which also allows you to customize how surfy or snappy the response is, similar to adjusting bushings on a traditional truck.
The website covers most of this and also provides you with two tools for adjusting the toe. Definitely check those out when you get to that point!
A few tips for setting these up:
-We strongly recommend using the included angled riser pad, since this creates a positive mechanical trail, aiding stability, and something a traditional front truck cannot achieve.
-There are 3 different "plugs": A yellow one, which features a hybrid coil-spring plus polyurethane compound, which provides the most snappy return to center and also the most consistent steering feel while riding since the metal coil-spring doesn't soften with active carving. A red one, which is entirely polyurethane and very similar to the yellow one in terms of return to center, but has a slightly more surfy feel. A black one, which is also entirely polyurethane and the softest option, works well if you are looking for a very surfy setup.
-The toe is set from the factory at 0.25 degrees inward, which is fairly neutral but adds a slight amount of self-centering. We recommend adjusting this last after you've found the other settings that work for you. Adjustments can be performed with an 8mm open wrench, which is not included with our prototype units but will be with our production units.
-We're including a 3D printed Allen wrench that can be used for adjusting the steering weight screw on the back of the trucks. We're including it since adjustments on the steering weight screw can be challenging otherwise, once the trucks are on an ESK8 deck, depending on how close the battery pack is located behind the trucks. Since this tool is 3D printed please be gentle with it - our production tool will be die-cast aluminum, which is much stronger. If the 3D printed tool happens to break, a 10mm Allen wrench can be used.
-There are two sets of spacers included. These are meant for accommodating nearly every wheel on the market. They also provide a way of adjusting steering feedback. The wider spacers will increase steering weight and aid high-speed cruising, while narrower, or no spacers, will decrease steering weight and make the steering response more snappy.
어떤 설정에도 적합하지만, 타입 200s는 고속 순항과 안정성이 장점인 ESK8용으로 특별히 제작되었습니다. 그들은 20도 기울어진 더블 킹핀 설정을 가지고 있지만, 더블 킹핀을 가진 전통적인 트럭과는 달리, 이것들은 스티어링 너클이 독립적으로 회전할 수 있도록 설계되었다. 이 기능은 셀프 센터링을 지원하며 토우를 제어할 수 있어 고속 순항 시 설정을 매우 편리하게 하거나 턴인을 통해 토우를 더욱 서프하게 만들 수 있습니다. 스티어링 중량은 트럭 뒷면의 나사 하나와 교환 가능한 "플러그"로 조정할 수 있어 기존 트럭의 부싱 조정과 마찬가지로 응답 속도를 조절할 수 있습니다.
포함된 각진 라이저 패드를 사용하는 것이 좋습니다. 이렇게 하면 기계적 흔적이 뚜렷해지고 안정성이 향상되며 기존의 전면 트럭으로는 달성할 수 없는 것이 있기 때문입니다.
3가지 "플러그"가 있습니다. 노란색은 하이브리드 코일 스프링과 폴리우레탄 화합물이 특징이며, 이 화합물은 금속 코일 스프링이 활성 조각으로 부드러워지지 않기 때문에 중앙으로 가장 날렵한 회전이 가능하고 주행 중에 가장 일관된 스티어링 느낌을 제공합니다. 빨간색은 완전히 폴리우레탄이고 중앙으로 돌아오는 면에서 노란색과 매우 유사하지만 약간 더 파도타기 같은 느낌을 가지고 있습니다. 완전히 폴리우레탄이고 가장 부드러운 옵션인 검은색으로, 서핑을 잘 할 수 있는 설정을 찾고 있다면 잘 작동합니다.
토우는 공장에서 안쪽으로 0.25도로 설정되며, 이는 상당히 중립적이지만 약간의 셀프 센터링을 더합니다. 사용자에게 적합한 다른 설정을 찾은 후 마지막으로 이 설정을 조정하는 것이 좋습니다. 조정은 당사의 프로토타입 유닛에는 포함되지 않지만 당사 생산 유닛에는 포함되어 있는 8mm 오픈 렌치를 사용하여 수행할 수 있습니다.
트럭 뒷면의 스티어링 중량 나사를 조정하는 데 사용할 수 있는 3D 프린팅 알렌 렌치가 포함되어 있습니다. 배터리 팩이 트럭 뒤에 얼마나 가까이 위치하느냐에 따라 ESK8 데크에 장착되면 스티어링 중량 나사의 조정이 어려울 수 있기 때문에 여기에 포함되었습니다. 이 공구는 3D 프린팅이므로 부드럽게 처리해 주십시오. 당사 생산 공구는 훨씬 더 강력한 다이캐스트 알루미늄이 될 것입니다. 3D 프린팅 공구가 파손되는 경우 10mm 알렌 렌치를 사용할 수 있습니다.
두 세트의 스페이서가 포함되어 있습니다. 이것들은 시중에 나와 있는 거의 모든 바퀴를 수용하기 위한 것이다. 또한 조향 피드백을 조정하는 방법도 제공합니다. 스페이서가 넓을수록 스티어링 중량이 증가하고 고속 순항에도 도움이 되며, 스페이서가 좁아지거나 없어지면 스티어링 중량이 감소하고 스티어링 반응이 더욱 빨라집니다.

[@KAMiJUINs]

I received truck support from the JUMA skate company. I met a product that I thought was really new after a long time. If you want to know more about Type 200 Truck Kit products that show special movement performance, please visit the website below. Personally, if you are an Esk8 person, I highly recommend you to experience it. jumaskate.com/ JUMA skate company로부터 트럭을 지원받았습니다. 오랫만에 정말 새롭다고 생각한 제품을 만났습니다. 특별한 움직임 성능을 보여주는 Type 200 Truck kit의 제품에 대해 더 알고 싶으신 분들은 아래 홈페이지 방문을해보시길 바랍니다. 개인적으로 Esk8피플이라면 경험해보시길 강력 추천드립니다. jumaskate.com/

[@user-hl3bv8fc9h]

항상 잘보고 있습니다

[@KAMiJUINs]

항상 봐주셔서 감사합니다!

[@jeffersonhope2668]

Just ordered using the link. I really respect and appreciate the craftsmanship you bring to every aspect of what you share.

[@KAMiJUINs]

Thank you so much for saying that and watching my videos :)

[@user-fn5hg4ru6l]

wow 저도 rapter 2.1 이 있는데요 똑같이 해봐야 겠습니다. 안그래도 방향 틀기가 쉽지 않았었는데.. 좋은 영상 감사 드려요

[@KAMiJUINs]

좋은 결과 느끼시길 바라겠습니다~ 시청감사합니다 :)

[@cristianconstantin6496]

You made an amazing video again, my friend! These trucks are really interesting, I'm happy to see some innovation happen in the eskate community. I would definitely consider purchasing them at the $170 pre-order price, but the full $280 is too high in my opinion. Again they bring a lot of innovation compared to expensive trucks whose only selling points are CNC made and size/weight

[@KAMiJUINs]

Thank you for watching :) my friend~ and I agree with you a lot. I think this truck is worth as much as the current price.

[@samcourtrc6767]

Another work of art my brother love it ❤️

[@KAMiJUINs]

Thanks for always BROTHER :)

[@_Zer0202]

I couldn't miss a new video of my friend. It's beautiful 😊👍

[@KAMiJUINs]

Thank you so much as always~ friend :)

[@ujung5683]

I love your work 👏👏 lovely kami😻

[@KAMiJUINs]

Thank you as always :) KAMi loves you HAHA

[@ratheonhudson3311]

I've been looking into this company and this truck looks really promising for a rugged urban rider like my 6 wheel setup. Thank you for trying it out and showing how to set it up. Also, I'm glad the adjustable nature of this setup helps with the ride comfort. Also, I really like how you compared the various parts and movements to other trucks and parts

[@KAMiJUINs]

Thank you for watching like that way~ :)

[@boostedchicken2739]

스피드 와블 잡아주는 트럭이라... 대단하네요.

[@KAMiJUINs]

많이 잡아주는 편이기는 합니다. 다만 뒷쪽 드라이브트럭은 기존의 트럭을 사용하다보니 앞쪽 와블은 거의 완벽한수준까지 제어가능하다고 느끼지만 뒷쪽은 어느정도 부싱조임 조정을 더 해야할것 같습니다.

[@user-pv8ke6tp1r]

제목 그대로 st의 미래같네요~!! 영상 잘봤습니다:)

[@KAMiJUINs]

네~ 시청감사합니다 :)

[@koreaimg1]

너무 좋아보입니다

[@KAMiJUINs]

시청 감사합니다 :)

[@chrisrathjan1501]

I'll give it a try.

[@KAMiJUINs]

Why not :) haha

[@NardelliFilmesOficial]

suuper nice bro! well done

[@KAMiJUINs]

Thank you as always~ :)

[@krishnansrinivasan830]

Awesome & Thanks :)

[@KAMiJUINs]

No problem Brother :) Thank you for watching~

[@eBoard3R]

*Can't remember if I commented yet lol because the way I view youtube has changed a bit recently after gettin a Firestick lol.* I really enjoyed watchin this VelociRaptor as I call it! I always liked the deck a lot and it was a shame how things went down with Inertion so it was great to see this custom / diy version. Super interesting truck choice for it, I am a bit of a truck and wheel geek lol so I look forward to seein more about this style of truck on this style of deck. I like these kinds of unique choices, makes things more interestin and fun to watch!

[@KAMiJUINs]

Like you, I am more interested in trucks, wheels, and decks because I value the balance and movement of the board more than the power performance of the board. Yeah, this was definitely interesting content and I want to deal with a lot of these things. Lastly, even if you don't leave a comment, I'm very grateful to you just for coming and watching. Don't forget that my friend :)

[@movation]

Great video ordered a pair.

[@KAMiJUINs]

Haha you will get the fun :)

[@movation]

@@KAMiJUINs Its a two\three month wait for stock :(

[@KAMiJUINs]

Yeah, I heard about it today, too. They're just getting started. That's why~

[@user-tr4fx6zk3x]

신기한 트럭이네요

[@KAMiJUINs]

시청감사합니다~ :)

[@Sucrerie]

it's the Ahjumma truck !

[@KAMiJUINs]

??? Thank you for watching~

[@Sucrerie]

@@KAMiJUINs it was a play of word with " 아줌마 " and " Juma "

[@shalvami]

Finally

[@KAMiJUINs]

Yeah :) Thank you for watching ~

[@shalvami]

@@KAMiJUINs Always brother!

[@ParkSeonghyun]

스타크 xt에 사용해도 효율적이라 말할수있을까요? 추천가능한 파츠가 될까요?

[@mekelsamson2443]

i might seriously buy this so that i can turn have a smaller turning circle on my longboard

[@KAMiJUINs]

It will be fun :) Thank you for watching~

[@WAVMOB]

I think this truck would be great for a Mini Board like the Meepo Mini or Exway Wave. What do you think ? Happy New Year !!!

[@KAMiJUINs]

In my opinion, if the wheelbase is shortened, it is expected to show a sharper movement. But on the other hand, I think the stability at high speed will decrease significantly. Thank you for watching and happy new year too :)

[@andreitudose3838]

realy nice truk love to see the inovation in the esK8 comuniti. Was wondaring if this could solve my wabble problem, I'm having wablles and I cant figure out what is causing them, I feel like its from the back (from the motors) however from this vid I saw that it can be caused by the font truck as well? I guess there are a lot of variables that cause wabbles...but I never thought that the font truck could cause them ...

[@KAMiJUINs]

If the back truck is a problem, why don't you tighten the bushing a bit or check the rotational sink of the two motors? Also, check if the distance between the front and rear wheels match both side. Thanks~

[@andreitudose3838]

@@KAMiJUINs thanks for the advise I've singled out that it's a communication problem between the main motor and the slave one not sure how to solve this tho as the esc is a factory stock one and from what I was informed it's non-programable maybe gonna by a new ESC :)))

[@Alex-kh9ju]

What is that board you put those on? I love the deck design and handles

[@KAMiJUINs]

It is Raptor 2.1 but It's a product that we can't buy anymore.

[@chrisrathjan1501]

Very interesting. I think it's called the 'scrub radius' on cars. I'm keen to get one. Are you not going to be making a rear version. Might be strange.

[@KAMiJUINs]

Hi welcome my friend :) There is a guide recommended by the manufacturer. According to it, Esk8 recommends replacing only the front truck. Downhill and push-board suggest another setting ways. Also I wonder what it would be like to do as you say. Before that, we need to find a way to mount the motor.

[@vguillaume4598]

@@KAMiJUINs hey ! whoah !!! thank you so much for the videos, so cool !!! you do such a great job everytime. i wish i can assembly a board by my own means to make it affordable; and these trucks seem smooth for a beginner rider and fun for experts. may i ask what you would recommand at the rear to make it aligned? and not to bother, is there a proper link or video you made of different drive train motors for diy.... sorry to bother, thank if you got time to answer, no worry if not - thanks again ;)

[@Catchmyep3]

Well, I guess I know what I'm buying tomorrow when my money hits the bank!

[@KAMiJUINs]

HAHA :) thank you for watching~

[@WAVMOB]

Kami do you think this Truck will work with the Tandem adapter you revised in your channel last year ? 4 wheels in the front with a good turn radius would be cool. Let us know you opinion and if you can make a video that would be great. I am buying a Raptor to use this truck.

[@jcob893]

Question: I want to replace my evolve GTR trucks for better ones. What would you recommend?

[@KAMiJUINs]

In the end, it's up to you to decide, but I think it'll be fun to try this :)

[@zoainoid]

I was wondering if you could use this with 6" or 7" AT tyres setup? looks very close to wheel bite with your street wheel setup, already!

[@KAMiJUINs]

If you want to use a bigger wheel, you need to choose the deck shape well.

[@zoainoid]

@@KAMiJUINs i want to use it on the new meepo hurricane. do you think will be possible?

[@movation]

Can you review the Apex Air trucks next, or the Trampa nockoff version.

[@KAMiJUINs]

If I have a chance, I'll try. Thanks~

[@cesarhstn]

miss my r2.1

[@KAMiJUINs]

I know what you mean~ Yeah My one still works really well :) Raptor is raptor!!! 2 years later, I'm still surprised.

[@jagerhimself9491]

How’s the stability comparing to the Trampa trucks on a street board?

[@KAMiJUINs]

Well... Both have excellent stability, but this truck has better for the flexible. But I don't think this truck can be used as a mountain board truck.

[@jagerhimself9491]

@@KAMiJUINs thanks, love you

[@KAMiJUINs]

No problem friend :)

[@user-es7kc2gt6s]

40키로대 거리를 시속 최대 35~40키로 대로 가면서 차에 적재가 가능한 보드가 있을까요??

[@KAMiJUINs]

속도는 거의 대부분의 보드가 가능하나 레인지(항속거리)때문에 가격대가 많이 높아질것 같습니다. 한180정도 보실 수 있다면 선택지가 다양하게 있을것 같습니다. boundmotor.com/product/bound-flash/ www.ownboard.net/collections/boards/products/ownboard-zeus-carbon www.meepoboard.com/collections/electric-skateboards/products/meepo-hurricane boneeboard.com/products/b-one-carbon-gtr-all-terrain 참고하세요~

[@user-es7kc2gt6s]

@@KAMiJUINs 혹시 직접 제작을 한다면 가격이 좀 줄어 들까요???

[@KAMiJUINs]

각각의부품 구매 배송비와 관세등을 합치고 조립할때 필요한 여러가지툴들 사다보면 더 많이들어갈수 있습니다.

[@user-redpantz1]

이 영상에서 사용하신 보드를 구입하려고 합니다. 그러나 보드와 컨트롤러간의 끊김 현상으로 인하여 사고를 겪었기에 같은 사고를 당할까 걱정이 큽니다. 그래서 혹 본 제품은 그러한 현상이 발생하는지 여쭙고싶습니다. 또한 여러 사이트를 검색하였으나 구매처를 찾지 못하여 서디서 구입하셨는지 답변 부탁드립니다.

[@KAMiJUINs]

영상에 나온 보드는 랩터2.1 버전으로 지금은 단종된 모델입니다.(회사가 사업을 중단했습니다.) 그리고 저는 랩터를 자주타지는 않지만 커넥팅 불량을 격은적은 한번도 없었습니다.

[@user-redpantz1]

@@KAMiJUINs 답변 감사합니다. 항상 대리만족하며 영상 잘보고있어요 ㅎㅎ

[@erdenemilan77]

how much price bro?

[@KAMiJUINs]

JUMA SKATE COMPANY - jumaskate.com/ Check this out~ Thanks

[@NullBlox]

Truck looks cool, but grinding is off the table. XD I want to see companies put the skate back into eskate and stop making up new designs that prevent tricks etc. Love your Videos!

[@KAMiJUINs]

Thank you for coming and watching :) my old friend lol~