Stihl FS91 R Weed Eater How to Load String

[@patshell2178]

What one would you recommend for a 80 year old women

[@topsaw]

I would go to your local saw shop and see if they have an electric one for you.

[@1jantheman1]

80 year old man.

[@debbraj8]

Thank you so much I'm a single mother it is so hard to get someone to come every time your string Runs Out I saw your video and I did it on my own and thank you and God bless you😊

[@topsaw]

Well done!

[@leonardomigot-yn1ti]

​@@topsaw the easiest way for brush cutter string is to take seven meters and cut it to 3.5 meters long on both sides and put it in the head of the dece stihl with the 25-2 head

[@kitchentrout5867]

This guy sounds like he was probably catching some gnarly waves in Santa Monica back in the early 90s

[@asmr_naturelover5314]

Our Fr Michel is a gift to humanity

[@topsaw]

Good

[@MrCratos808]

Thank u so much, I guess your wife was holding the camera so I would like to thank the both of you…. You just made weed wackin more fun Tkns again also you tube university….

[@topsaw]

Thank you

[@ronkay1573]

Best video I’ve seen spooling this model. Thanks

[@topsaw]

Good to hear, thank you

[@Poncho502]

Great job I’ll try to do that tomorrow morning Well done video 🎉

[@topsaw]

Thank you

[@Hannah-gp4hv]

Thank you for the great video, helped solve the issue I was having

[@jeanpaulvargas3645]

For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. kzbin.infoUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.

[@topsaw]

Yes it is

[@cristytop6392]

Just to say thank you I was so desperate how to put string n you should me . Good KZbin thanks again

[@topsaw]

Glad it helped solve the problem

[@jaseistheguy5482]

Thank you. I just bought one and had no clue.

[@topsaw]

Glad it helped

[@chipbruestle4309]

Thank you so so much my I spent like an hour on doing this and I was able to do it in like 10 mins thank u so much

[@topsaw]

Glad it helped

[@simpleiowan3123]

Exactly what I needed, ty! 🙏

[@topsaw]

Glad to hear it

[@claudiaapplin3698]

Best demo thank you

[@topsaw]

Glad it helped

[@danielcauley88]

Thank you very helpful! 👍

[@vaporosoez]

Just started working on a farm w this weed eater. Can I get a handlebar to attach to it?

[@topsaw]

Yes you can add one

[@patshell2178]

What one would you recommend for a older woman

[@topsaw]

I like a small independently owned saw shop not a box store for the right tool, they will let you try it out so you can get the feel for it. The two weed eaters in this video are pretty large heavy commercial machines.

[@patshell2178]

Thank you for your answer we have a acre and the lttle weed wackers just don't hack it

[@marcusfurlow8332]

@@topsaw I would recommend a Stihl fs56 straight shaft trimmer,they last longer

[@mosescarrizales4808]

Love how you skipped the second row fill up lol, always do the top row first then the bottom one and make sure you follow the arrow!

[@paullang1505]

Both lines go in the same direction?

[@topsaw]

Good advice

[@revelation2935]

Great video. I learned a ton.

[@topsaw]

Glad to hear it

[@jefffaust89]

People make reloading stihls main autocut head so difficult. I really don’t understand why. When u pop off the lid and look at the bump spool it’s pretty much self explanatory. Some people might test or experience on how much line to load in it. I have over the years, but that here no there. You don’t need to run out and get a speed feed it’s just something to complain about. I know for a fact the stihl heads hold up much longer than speedfeeds do. One to two bump spools for the whole year and that’s running them multi times a week commercial type use. Residential use one will most likely do u the whole season. Speed feed I heard from folks online average replacing cap bottoms every 2-3 months guessing they mean commercially used. So that’s why I stayed with stihls regular wind head. I can load one pretty quick in about a 1min or so out in the field. I just precut 2 10- 12inch sections of line or one long 20 - 24 inch piece of line push one end into each of the spool holes wrap it up. Click it into spool slots. Set it inside the head lined up with eyelits and snap em in put cover on and down. Much easier done than said.

[@topsaw]

Well said, i have tried the Amazon copies but they wear out ten yes faster

[@stevek4546]

I have an FS 91R and it’s a 2 stroke. I have never heard of using 2 stroke mixed fuel in a 4 stroke

[@topsaw]

There is no motor oil in it only the mix

[@adamvanderbur6731]

Thank you very helpful

[@topsaw]

Glad to hear it

[@jeffreythomasheil5216]

Good video

[@topsaw]

Thank you

[@bushlife841]

Cheers mate. Cant believe they have no mention of how to fit cord in the manual.

[@topsaw]

Thanks, Maybe they know everyone goes to KZbin now

[@AtomicQuotient]

Or how to open the damn cover in the first place .. crazy ..

[@tallowturq]

Ditto ditto ditto!! 😂

[@lc285]

Thanks!

[@topsaw]

Thanks for watching

[@MrNthunderhawk]

The whole purpose of me watching the video was to see you reload the string..and you only did one..thank you for doing the second one

[@topsaw]

Glad it helped

[@googleuser8891]

Same

[@suzettemcafee9732]

Thank you !!!

[@topsaw]

Glad it helped

[@funandfa7561]

Does it still work

[@topsaw]

Used it today

[@kylemccoy4435]

FS 94 FS 240 both are two stroke platforms

[@topsaw]

Ok

[@rickholly1478]

Great Video. Thanks. I just subscribed.

[@100brucebrown]

Thank You

[@topsaw]

Thanks for watching

[@aarone1777]

Remember: too large size of line can burn out the berrings fairly quickly.

[@topsaw]

Good advice, I didn't know that but it makes sense

[@athandifulvio7759]

What about hearing protection

[@topsaw]

I try to always wear it. There have been some studies out that show continuous loud sound not only makes you deaf but also is exhausting.

[@412Lawn]

man echo is hands down ahead of the game with their speed head. Stihl needs to catch up.

[@topsaw]

Yes, I like the echo head

[@its_evers6445]

Step one: Take head off Step two: throw it in the trash Step three: buy a speed feed 400 haha jk awesome video man!

[@topsaw]

I haven't had the best luck with the speed feed, they seem to feed the line out too quick

[@jeffpringle2945]

This video alone might convince me to get the echo for the speed feed head

[@topsaw]

Ok

[@AtomicQuotient]

Nice video but would be useful as a complete noob, why on earth you need to use a screw driver to open the lid. Is this just how it is, I know obvious to many who have been using stihl, but as a newcomer, some things seem not so obvious, also when you pulled things tight at the end .. thanks was helpful .. thanks for making it.

[@topsaw]

Will be more thorough next time. Yes, need to use a screwdriver to get the plastic detents pushed in

[@AtomicQuotient]

@@topsaw Thank you, that seems an overkill but perhaps a necessity for them to last.

[@juanmanuelbernal4978]

THANKS ANYWAY.

[@topsaw]

Thank you

[@Shaft827]

Grab the line, take 6 arms lengths, cut it, now you still have 1 string, find the middle, now you have 2, feed each independently through the slots where they are supposed to go...2 minuits tops...I run .080....NO WAY any more than that...thanks

[@topsaw]

Good way to go

[@Jsars98]

10-4 good buddy

[@topsaw]

10-4

[@PracticingLiberty]

How to load string and other stuff.

[@topsaw]

True

[@Tools-For-Tech-Teachers]

😀

[@ghosthk2935]

That string should pull off of the spool without taking it apart...

[@topsaw]

Ok

[@nate589]

IF you dont feel like wasting your time skip to 03:58. Thats all you're here for.

[@topsaw]

Good advice

[@frankiej.5581]

Really man! Ur wearing a helmet haha

[@Sky-rj9le]

Frankie Jim he being safe

[@apemangrossman7087]

That face shield is awesome Most comfortable work helmet ever

[@topsaw]

Also have Blu tooth in the helmet, so I can listen to music

[@gregorytomeo]

Safety is key brother 👊

[@Starik905]

Ха, половина струны выбросил в траш, потому что оказалось слишком много отрезал , а разве нет ума просто в книжке посмотреть сколько должна быть длина струны данного диаметра струны для этой модели? Потом, зачем резать пополам струну, накручивай сразу два конца в кассету и когда заполнится кассета, оставшуюся петлю отрежь пополам, вот и вех делов то…

[@topsaw]

Ok

[@chrisrainman5887]

Why in the world would you use that head. That’s so time-consuming.

[@topsaw]

Ok

[@MrCoBaker]

Time consuming was reading your useless reply. If you don’t like it, don’t use it, stupid.

[@juanmanuelbernal4978]

YOU NEED TO SPEAK LOUDER,TAKE SOME VITAMINS.

[@topsaw]

Thanks, good advice, had neck surgery and my voice hasn't been the same since.

[@juanmanuelbernal4978]

SORRY.I SHOULD BE MORE CONSIDERATE AND GRATEFUL.

[@topsaw]

Thank you

[@ontimeconstructions7035]

why are you whispering ? cant hear a word !!

[@topsaw]

Sorry about that, I got a wireless mic since then

[@AtomicQuotient]

@@topsaw You voice was fine.

[@806kelly01]

Thank you.

[@topsaw]

Thanks for watching

[@daniellecupinski4763]

Thank you!!

[@topsaw]

Thank you for watching